• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.58-64
• /
• 2000

Assuming that the performance of holographic storage media is ideal, we estimate the area storage density of disk-type holographic memories, when the method of either angle multiplexing, or rotational multiplexing, or both are used. The area storage density is strongly dependent on the f numbers (ratio of focal length to diameter) of both the Fourier transform lens in the signal arm, denoted by $F/#_2$, and the angle range over which the reference beam is incident (or, the equivalent f number corresponding to the angle range denoted by $F/#_1$). The area storage density is largely independent of the pixel pitch of the spatial light modulator when the Fourier plane holograms are recorded, while it is sensitive to the pixel pitch when the image plane holograms are recorded. In general, to obtain high area storage density, the Fourier or at least near Fourier plane holograms rather than the image plane holograms should be recorded. In addition, when the thickness of the recording materials are less than approximately $500\mu\extrm{m}$, rotational multiplexing gives higher area storage densities than angle multiplexing does. To increase the storage density further, however, it is desirable to use both of the two multiplexing methods in combination.nation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2002

This study was to investigate the effect of EEG wave type of visual cortex on conjugate movement of eyeball according to movement of visual target. Visual evoked potential(VEP) system used the Bio-Pag(production in USA) and recorded to 586 computer. The illumination of test room was 50lux and the visual target was red light dot of 3cm size. The results of dextroversion and levoversion as follows : The visual stimulation waves on the visual cortex have about 71% of delta wave, about 12% of beta wave, about 9% theta wave and about 6% of alpha wave respectively. The dextroversion and levoversion state was similar results on the histogram amplitude of EEG wave, frequency of EEG wave type, EEG wave style and phase diagram of amplitude. Expecially the histogram amplitude of EEG wave appeared almost the Gaussian shape and the phase analysis of amplitude of EEG wave was nearly linear shape. On the fast fourier transform of the amplitude and Hz, the frequency was almost low frequency under 20 Hz, and the dextroversion and levoversion shape was similar results.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.1-5
• /
• 2004

Tunable diode laser absorption spectroscopy was performed for analysis of the H$_2$$^{18}$ O/H$_2$$^{16}$ O isotope ratio of a water sample which was enriched by the membrane distillation method. In order to improve the signal-to-noise ratio, the wavelength modulation spectroscopic method was used with a lock-in amplifier. The fringe noise could be suppressed by using the FFT (Fast Fourier Transform) lowpass filter and the optimization of the modulation depth of the laser frequency. The maximum deviation of $\delta$-value was measured to be$\pm$4$\textperthousand$.

• Korean Journal of Optics and Photonics
• /
• v.21 no.3
• /
• pp.91-96
• /
• 2010

The size of a reconstructed image depends on the reconstruction distance and wavelength. The double fourier transform method is proposed to eliminate the dependence on the reconstruction distance and wavelength. We can get a fixed reconstructed image size by using the double fourier transform method. Two wavelength digital holography is proposed to measure the step height, which is larger than a single wavelength. The two image size of different wavelength holograms should be the same in order to apply two wavelength digital holography. We use two wavelength digital holography and double fourier transforms to measure the step height. The measured data were reasonable and we found that the double fourier transform is useful in two wavelength digital holography.

• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.246-250
• /
• 2012

We derive analytical expressions for the output spectral density and the noise power $P_{\beta}$ in noise loading analysis using Volterra kernels to characterize fiber nonlinearities. The bandwidth of the input noise source has little effect on $P_{\beta}$, but the power of the input noise source and the dispersion parameter value of the fiber have a significant effect on $P_{\beta}$. The Volterra method predicts ${\Delta}P_{\beta}[dB]$ = 30 dB/decade, which agrees very accurately over a wide range of fiber parameters compared with the numerical results by the split-step Fourier method. Therefore the Volterra method could be useful to predict the performance of a dense WDM system when we plan to upgrade fiber or increase signal power.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.256-263
• /
• 1998

In this paper, we propose a volume holographic fingerprint recognition system based on optical correlator for personal identification. Optical correlator has high speed and parallel processing characteristics of optics. Matched filters are recorded into a volume hologram that can store data with high density, transfer them with high speed, and select a randomly chosen data element. The multiple reference images of database are prerecorded in a photorefractive crystal in the form of Fourier transform images, simply by passing the image displayed in a spatial light modulator through a Fourier transform lens. The angular multiplexing method for multiple holograms of database can be achieved by rotating the crystal by use of a step motor. Experimental results show that the proposed system can be used for the security verification system.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.390-396
• /
• 1993

When a one-dimensional telecentric paraxial holographic kinoform is used as a Fourier transform lens, we analyzed three surface-relief structures, i.e., plano-convex, convex-plano and biconvex shapes, employing exact raytracing method based on Snell's law. For the kinoform of E/8 and focal length of 15 mm, the number of zones, the thickness, and the slope of parabolic surfaces are varied by changing the refractive indicies of kinoform material and surrounding medium. It is found that biconvex shape gives the best results in general, although off-axis performance degrades in all cases as the slope of parabolic surfaces increases.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.324-330
• /
• 2013

Phase-measuring deflectometry is a full-field gradient measuring technique that lends itself very well to testing specular optical surfaces. We have measured deformation of a large specular surface by deflectometry. In this work, we have used a Fourier-transform method to get the phase from a measured deformed fringe pattern, and we have used least squares method to obtain the height information of the specular surface from the calculated slope. Experimentally, we have confirmed that deflectometry can be used for deformation measurement of a specular surface like that of a wafer.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.40-44
• /
• 2021

In this paper, LED arrays with segmented mirrors and a mask are presented as a new dark-field illuminator for reflective Fourier ptychographic microscopy (FPM). The illuminator can overcome the limitations of the size and the position of samples that the dark-field illuminator using a parabolic mirror has had. The new concept was demonstrated by measuring a USAF 1951 target, and it resolved a pattern in group 10 element 6 (274 nm) in the USAF target. The new design of the dark-field illuminator can enhance competitiveness of the reflective FPM as a versatile measurement method in industry.

• Current Optics and Photonics
• /
• v.6 no.5
• /
• pp.463-472
• /
• 2022

At certain wavelengths, single-pixel imaging is considered to be a solution that can achieve high quality imaging and also reduce costs. However, achieving imaging of complex scenes is an overhead-intensive process for single-pixel imaging systems, so low efficiency and high consumption are the biggest obstacles to their practical application. Improving efficiency to reduce overhead is the solution to this problem. Salient object detection is usually used as a pre-processing step in computer vision tasks, mimicking human functions in complex natural scenes, to reduce overhead and improve efficiency by focusing on regions with a large amount of information. Therefore, in this paper, we explore the implementation of salient object detection based on single-pixel imaging after a single pixel, and propose a scheme to reconstruct images based on Fourier bases and use U²Net models for salient object detection.