• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.579-586
• /
• 2016

This paper describes kinematic analysis of a 6-degrees-of-freedom (DOF) ultra-precision positioning stage based on a flexure hinge. The stage is designed for processes which require ultra-precision and high load capacities, e.g. wafer-level precision bonding/assembly. During the initial design process, inverse and forward kinematic analyses were performed to actuate the precision positioning stage and to calculate workspace. A two-step procedure was used for inverse kinematic analysis. The first step involved calculating the amount of actuation of the horizontal actuation units. The second step involved calculating the amount of actuation of the vertical actuation unit, given the the results of the first step, by including a lever hinge mechanism adopted for motion amplification. Forward kinematic analysis was performed by defining six distance relationships between hinge positions for in-plane and out-of-plane motion. Finally, the result of a circular path actuation test with respect to the x-y, y-z, and x-z planes is presented.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.144-153
• /
• 1997

The inverse kinematics problem of a reclaimer which excavates and transports raw materials in a raw yard is investigated. Because of the geometric feature of the equipment in which scooping buckets are attached around the rotating disk, kinematic redundancy occurs in determining joint variable. Link coordinates are introduced following the Denavit-Hartenbery representation. For a given excavation point the forward kinematics yields 3 equations, however the number of involved joint variables in the equations is four. It is shown that the rotating disk at the end of the boom provides an extra passive degree of freedom. Two approaches are investigated in obtaining inverse kinematics solutions. The first method pre-assigns the height of excavation point which can be determined through path planning. A closed form solution is obtained for the first approach. The second method exploits the orthogonality between the normal vector at the excavation point and the z axis of the end-effector coordinate system. The geometry near the reclaiming point has been approximated as a plane, and the plane equation has been obtained by the least square method considering 8 adjacent points near the point. A closed form solution is not found for the second approach, however a linear approximate solution is provided.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.467-475
• /
• 1998

The Six Degree-of-Freedom manipulators are generally operated by linear actuators which are hydraulic cylinder, pneumatic cylinder, ball-screw. But these actuators are not adequate to have a wide work-space, and furthermore some of them have a self-locking property. Therfore, we have designed a new manipulator which fully overcomes these demerits. The new manipulating system consists of 6 DC-motors to generate operation forces and 6 position transducers to feedback displacement signals. This paper presents an overview of the design and characteristics of 6 Degree-of-Freedom force feedback manipulators for vitual reality implementation. we can operate Six Degree-of-Freedom manipulator with six motors and six potentiometers.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.118-125
• /
• 2002

The previous kinematic analysis of wheeled mobile robots(WMRs) is performed in an ad-hoc manner, while those of the robot manipulators are done in a consistent way using the coordinate system assignment and the homogeneous transformation matrix. This paper shows why the method for the robot manipulators cannot be used directly to the WMRs and proposes the method for the WMRs, which contains modeling the wheel with the Sheth-Uicker notation and the homogeneous transformation. The proposed method enable us to model the velocity kinematics of the WMRs in a consistent way. As an implementation of the proposed method, the Jacobian matrices were obtained for conventional steered wheel and non-steered wheel respectively and the forward and inverse velocity kinematic solutions were calculated fur a tricycle typed WMR. We hope that our proposed method comes to hold an equivalent roles for WMRs, as that of the manipulators does for the robot manipulators.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.313-321
• /
• 2020

In this paper, two types of linear actuation methods for the previously proposed adaptive gripper are presented, which includes actual parallelogram inside a five-bar mechanism and has the advantages of smaller actuation torque and larger stroke over the commercial adaptive gripper by RobotiQ. The forward/inverse kinematics and statics analyses for two types of linear actuations are derived. From the inverse kinematics and statics analyses, linear actuation type I is selected and the gripper prototype is designed.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.469-475
• /
• 1997

A method for solving the inverse kinematic problem of reclaimer is presented in this paper. The reclaimers in the raw yard are being used to dig raws and transfer them to the blast furnaces. The kinematic configuration of the reclaimer is different from that of commercially available robots, because it has a rotating disk with several buckets at the end of the boom to dig raws. The reclaimer has a redundancy due to the rotating disk : the degrees of freedom are greater than the number of forward kinematic equations. A plane equation in the 3-dimensional space is determined by using several points adjacent to the reclaiming point of the raw ores pile. A constraint is obtained from the relation ship of the plane equation and trajectories of the bucket of the reclaimer. Finally, a solution of the inverse kinematics of the reclaimer is determined by a numerical method.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1421-1429
• /
• 1994

An algorithm is developed for solving the inverse kinematic problem of a 6-degree-of-freedom robot with a wrist offset for which the closed form inverse solutions are not obtainable, but knowledge of one joint variable allows closed form solutions of the remaining joint variables. The algorithm does not require Forward Kinematics nor Jacobian but uses the implicit kinematic relationships between joint variables and the given hand position. An iterative back substitution method is used to solve the inversion and the optimal conditions of the convergence are incoporated. An example is given to illustrate the concepts, the solution procedure and its convergency.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3398-3407
• /
• 1996

In this paper, we derive an algorithm and develope a computer program which analyze rapidly and precisely the inverse kinematics of robotic mechanism with spatial complex chain structure based on the relative coordinates. We represent the inverse kinematic problem as an optimization problem with the kinematic constraint equations. The inverse kinematic analysis algorithm, therefore, consists of two algorithms, the main, an optimization algorithm finding the motion of independent joints from that of an end-effector and the sub, a forward kinematic analysis algorithm computing the motion of dependent joints. We accomplish simulations for the investigation upon the accuracy and efficiency of the algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.661-665
• /
• 1996

An inverse kinemetics problem of a reclaimer which digs and transports ironstones or coals in the raw yard is investigated. Because of the special features of the reclaimer of which scooping buckets are attached around the rotating drum at the end of boom, kinematic redundancy occurs in determining the joint varialbes For a given reclaiming point in space the forward kinematics yields 3 equations, however the number of involved variables in the equations are four. A plane equation approximating the surface near a reclaiming point is obtained by considering 8 adjacent points surrounding the reclaiming point. One extra equation to overcome redunduncyis further obtained from the condition that the normal vector at a reclaiming point is perpendicular to the plane. An approximate solution for a simplified problem is first discussed, Numerical solution for the oritinal nonlinear porblem with a constraint equation is also investigated. Finally a closed form solution which is not exact but sufficiently close enough is proposed by exploiting geometric constraint.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.144-150
• /
• 2000

In this paper, we introduce a modified six-degrees-of-freedom parallel-link manipulator, which will be applied to the human vibration experiments. We analyze the inverse kinematics and workspace of this manipulator and comprehend the characteristics of kinematics analyzed. Additionally, solutions of forward kinematics are obtained through the iterative Newton-Raphson method known as one of the most used numerical analysis. Finally, dynamic equation of the manipulator is derived in closed form through the Newton-Euler approach, which will be used for the development of control software.