• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.254-261
• /
• 1998

This study presents a discrete optimization of tall steel buildings under multiple drift constraints using a dual method. Dual method can replace the primary optimization problem with a sequence of approximate explicit subproblems. Since each subproblem is convex and separable, it can be efficiently solved by using a dual formulation. Specifically, this study considers the discrete-optimization problem due to the commercial standard steel sections to select member sizes. The results by the proposed method will be compared with those of the conventional optimality criteria method

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.481-488
• /
• 1998

The drift and inter-story drift control method for steel structures subjected to seismic forces is formulated into a structural optimization problem in this paper. The formulated optimization problem with constraints on drift, inter-story drifts, and member strengthes are transformed into an unconstrained optimization problem. For the solution of the tranformed optimization problem an searching algorithm based on the gradient projection method utilizing gradient information on eigenvalues and eigenvectors are developed and presented in detail. The performance of the proposed algorithm is demonstrated by application to drift control of a verifying example.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.286-293
• /
• 2003

In cosmetic formulations, texture plays a key role in ingredient choice and formulation optimization. But texture parameters are often measured by sensorial analysis in the last stages of formulation development. Rheology or texture analysis, used separately, has the benefit of characterizing the behavior of raw materials (e.g. polymers) and controlling and predicting the stability of formulations. SEPPIC has developed rheology and texture analysis protocols to obtain a better understanding of the influence of raw materials on the cosmetic texture of formulations. When used in combination, these two methodologies are complementary and provide useful data regarding the impact of raw material choice on all the development steps: manufacturing procedure, formulation stability, skin feeling.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.130-138
• /
• 2007

A coupled variational equation for fluid-structure interaction (FSI) problems is derived from a steady state Navier-Stokes equation for incompressible Newtonian fluid and an equilibrium equation for geometrically nonlinear structures. For a fully coupled FSI formulation, between fluid and structures, a traction continuity condition is considered at interfaces where a no-slip condition is imposed. Under total Lagrange formulation in the structural domain, finite rotations are well described by using the second Piola-Kirchhoff stress and Green-Lagrange strain tensors. An adjoint shape design sensitivity analysis (DSA) method based on material derivative approach is applied to the FSI problem to develop a shape design optimization method. Demonstrating some numerical examples, the accuracy and efficiency of the developed DSA method is verified in comparison with finite difference sensitivity. Also, for the FSI problems, a shape design optimization is performed to obtain a maximal stiffness structure satisfying an allowable volume constraint.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.934-937
• /
• 2006

This investigation presents a topology formulation to design optimal poroelastic acoustic foams to maximize absorbing ability. For successful formulation, a single set of equations based on Biot's theory is adopted and an appropriate material interpolation strategy is newly developed. Because there was no earlier attempt to solve poroelastic acoustic foam design problems in topology optimization setting, many challenging issues including modeling and interpolation must be addressed. First, the simulation accuracy by a proposed unified model encompassing acoustic air and poroelastic material was checked against analytical and numerical results. Then a material interpolation scheme yielding a distinct acoustic air-poroelastic material distribution was developed. Using the proposed model and interpolation scheme, the topology optimization of a two-dimensional poroelastic acoustic foam for maximizing its absorption coefficient was carried out. Numerical results show that the absorption capacity of an optimized foam layout considerably increases in comparison with a nominal foam layout.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.263-275
• /
• 2000

Multidisciplinary design optimization(MDO) can yield optimal design considering all the disciplinary requirements concurrently. A method to implement the collaborative optimization(CO) approach, one of the MDO methodologies, is developed using a pre-compiler “EzpreCompiler”, a design optimization library “EzOptimizer”, and a common object request broker architecture(CORBA) in distributed computing environment. The CO approach is applied to a mathematical example to show its applicability and equivalence to standard optimization(SO) formulation. In a realistic engineering problem such as optimal design of a two-member hub frame, optimal design of a speed reducer and initial design of a bulk carrier, the CO yields better results than the SO. Furthermore, the CO allows the distributed processing using the CORBA, which leads to reduction of overall computation time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.8-9
• /
• 2006

This paper presents a new methodology to calculate an optimal solution of equilibrium to power system differential algebraic equations. It employs a nonlinear interior point method for solving the optimization formulation, which includes dynamic equations representing two-axis synchronous generator models with AVR and speed governing control, algebraic equations, and steady-state nonlinear loads. Equilibrium optimization (EOPT) is useful for diverse purposes in power system analysis and control with consideration of the system frequency constraint.

• 전산구조공학
• /
• 제5권1호
• /
• pp.133-142
• /
• 1992

본 논문은 수식화의 특이성 때문에 구조 최적화 문제에 거의 사용되지 않고 있는 선형 goal programming을 대규모 비선형 구조 최적화에 응용하는 방법을 제시한다. 이 방법은 다기준 최적화의 도구로 사용되는데 그 까닭은 goal programming이 목적함수와 제한조건등을 정의하는데 있어서 발생하는 난점들을 제거해 주기 때문이다. 이 방법은 비선형 goal 최적화 문제들의 해를 얻기 위해서 유한요소해석, 선형 goal programming기법, 그리고 계속적인 선형화 기법을 이용한다. 즉, 대규모 비선형 구조 최적화 문제를 비선형 goal programming형태로 전환시키는 일반적인 수식화 방법을 제시하고, 얻어진 비선형 goal 최적화 문제를 풀기 위한 계속적인 선형화 방법에 대해서도 논의한다. 설계도구로서 이 방법의 유효성을 논증하기 위하여 10, 25 및 200트러스의 사례를 가지고 응력제한조건들의 최소무게 구조 최적화 문제에 대한 해를 모색하며 이를 다른 연구결과와 비교검토한다.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.61-69
• /
• 2007

The objective of this work is to integrate reliability analysis into topology optimization problems. We introduce the reliability constraint in the topology optimization formulation, and the new model is called Reliability-Based Topology Optimization (RBTO). The application of the RBTO model gives a different topology relative to the classical topology optimization that should be deterministic. When comparing the structures resulting from the deterministic topology optimization and from the RBTO model, the RBTO model yields structures that are more reliable than the deterministic ones (for the same weight). Several applications show the importance of this integration.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1950-1957
• /
• 2015

Modern wind generators (WGs) are forced or encouraged to participate in frequency control in the form of inertial and/or primary control to improve the frequency stability of power systems. To participate in primary control, WGs should perform deloaded operation that maintains reserve power using speed and/or pitch-angle control. This paper proposes an optimization formulation that allocates the required reserve to WGs to maximize the kinetic energy (KE) stored in a wind power plant (WPP). The proposed optimization formulation considers the rotor speed margin of each WG to the maximum speed limit, which is different from each other because of the wake effects in a WPP. As a result, the proposed formulation allows a WG with a lower rotor speed to retain more KE in the WPP. The performance of the proposed formulation was investigated in a 100-MW WPP consisting of 20 units of 5-MW permanent magnet synchronous generators using an EMTP-RV simulator. The results show that the proposed formulation retains the maximum amount of KE with the same reserve and successfully increases the frequency nadir in a power system by releasing the stored KE in a WPP in the case of a disturbance.