• Ecology and Resilient Infrastructure
• /
• 제2권1호
• /
• pp.22-32
• /
• 2015

본 연구는 하천에서 격리된 구하도와 본류에서 어류 군집 구조의 차이를 비교하기 위하여, 만경강에서 2곳의 본류와 단절된 구하도를 선정하여 환경 요인과 어류 군집 구조를 조사하였다. 측정된 환경 자료를 이용하여 주요인분석을 실시한 결과, 구하도는 하상이 주로 진흙과 모래로 이루어졌고 식생 피도가 높은 반면 본류는 수로 폭이 넓고 하상이 왕자갈, 잔돌, 호박돌 등 다양한 하상구조를 보였고 용존산소 및 전기전도도가 높게 나타났다. 어류 자료를 사용하여 군집분석 결과, 구하도 군집과 본류 군집으로 뚜렷이 구분되었다. 구하도는 호소 및 소하천에 서식하는 어류 군집 구조가 나타났고, 본류는 강과 같은 대형하천에 서식하는 어류군집 구조를 나타냈다. 비모수다차원척도법 결과에 의하면 구하도에 분포하는 어류는 식생 피도와 높은 양의 상관관계를 가진 반면 본류에 분포한 어류는 용존산소, 전기전도도와 높은 상관관계를 보였다. 본 연구 결과, 구하도는 본류와의 연결성이 단절되면서 본류와 비교할 때 어류 서식 환경이 완전히 달라짐으로써 어류 군집 구조가 큰 차이를 보이고 어류의 산란처 및 은신처 기능도 상실한 것으로 판단되었다. 따라서 하천의 어류 생물다양성 증진을 위하여 구하도의 횡적 연결성을 복원하기 위한 노력이 필요하다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.675-680
• /
• 2008

The effect of pore former content on both porosity and pore structure was investigated for porous sintered reaction-bonded silicon nitrides (SRBSNs). A spherical PMMA with $d_{50}=8{\mu}m$ was employed as a pore-former. Its amount ranged from 0 to 30 part. Porous SRBSNs were fabricated by post-sintering at various temperatures where the porosity was controlled at $12{\sim}52%$. The strong tendency of increasing porosity with PMMA content and decreasing porosity with sintering temperature was observed. Measured pore-channel diameter increased $(0.3{\rightarrow}1.1{\mu}m)$ with both PMMA content and sintering temperature.

• Ecology and Resilient Infrastructure
• /
• 제2권2호
• /
• pp.137-146
• /
• 2015

하천 본류와 구하도 사이의 횡적 연결성은 하천-홍수터 생태계에서 생태적 기능을 유지하는데 매우 중요하다. 본 연구는 2차원 평균수심 유한요소 모형인 River2D를 사용하여 만경강에서 직강화로 인해 격리된 구하도의 연결성을 가상으로 복원하고 평수기와 홍수기 조건에서 어류 서식처 변화를 평가하였다. 평가 대상 어종은 정수성 어종인 붕어 (Carassius auratus)와 유수성 어종인 피라미 (Zacco platypus)를 선정하였다. 물리서식처모의 결과에 의하면, 연결성 복원 전후의 붕어와 피라미의 가중가용면적 (weighted usable area, WUA)은 복원 후에 증가하였으며 양방향 복원이 일방향 복원보다 어류 서식처 복원에 효과적이었다. 또한 가중가용면적의 증가율은 평수기보다 홍수기에 더 높았다. 특히 피라미의 경우 홍수기에 구하도의 연결성이 양방향 복원되었을때 구하도 내의 가중가용면적이 복원 전 대비 약 4배로 크게 증가할 것으로 예측되었다. 본 연구 결과 만경강에서 본류와 구하도의 연결성이 복원되었을 때 정수성 어류와 유수성 어류의 서식처가 모두 증가할 것으로 예상되며, 일방향 복원보다 양방향 복원이 더 효과적인 것으로 나타났다. 또한 복원된 구하도는 홍수기 때 어류의 피난처 역할을 할 것으로 기대되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.113-114
• /
• 2007

Hole mobility characteristics of single surface channel and dual channel Si/SiGe structure are compared, where the former one consists of a relaxed SiGe buffer layer and a tensile strained Si layer on top, and for dual channel structure a compressively strained SiGe layer is inserted between them. Due to the difference of hole mobility enhancement factors of layers between them, hole mobility characteristics with respect to the Si cap thickness shows the opposite tend. Hole mobility increases with thicker Si cap for single channel structure, whereas it decreases with thicker Si cap for dual channel structure.

• ETRI Journal
• /
• 제39권2호
• /
• pp.284-291
• /
• 2017

Drain-induced barrier lowering (DIBL) is one of the main parameters employed to indicate the short-channel effect for nano metal-oxide semiconductor field-effect transistors (MOSFETs). We propose a new physical model of the DIBL effect under two-dimensional approximations based on the energy-conservation equation for channel electrons in FETs, which is different from the former field-penetration model. The DIBL is caused by lowering of the effective potential barrier height seen by the channel electrons because a lateral channel electric field results in an increase in the average kinetic energy of the channel electrons. The channel length, temperature, and doping concentration-dependent DIBL effects predicted by the proposed physical model agree well with the experimental data and simulation results reported in Nature and other journals.

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.333-342
• /
• 2014

본 논문은 OFDM 블록에 파일럿 심볼들이 빗 형태의 패턴에 따라 배치된 경우, 가상 부반송파를 가지는 OFDM 시스템의 channel frequency response (CFR)를 추정하는 여러 방식들을 서로 비교한다. 채널 임펄스 응답을 먼저 예측하는 것이 목적인 minimum mean square error (MMSE) 기반의 채널추정 방식과 누설현상의 억제가 목적인 MMSE 기반의 채널추정 방식이 지금까지 비교되지 않았기 때문에, 본 논문에서는 후자 방식과 전자 방식의 mean square error (MSE) 값들의 차이가 양수가 됨을 유도함으로써 전자 방식의 우수성을 논리적으로 증명한다. 아울러 본 논문에서는 파일럿 수의 변화가 MMSE 기반 채널추정 방식과 least-square (LS) 기반 채널 추정 방식의 성능에 미치는 영향을 조사한다. 컴퓨터 시뮬레이션을 통해 채널추정 방식들의 성능을 정량적으로 확인한다.

• 산업공학
• /
• 제16권3호
• /
• pp.311-321
• /
• 2003

We propose the improved channel assignment and management methods for an efficient use of traffic channel resource for supporting 12.2 Kbps, 64 Kbps, and 384 Kbps traffic with the different quality of service(QoS) in the radio network controller(RNC) in asynchronous IMT-2000 system. We consider two types of traffic channel block assignments for utilizing the traffic channel efficiently; the Completely Shared(CS) channel assignment and the Partially Dedicated and Partially Shared(PDPS) channel assignment. The former is that all traffic channel blocks are completely shared with all traffic types. The latter is that some traffic channel block is independently assigned to each traffic type and the other blocks are completely shared with some traffic type. We also propose the traffic channel management method which consists of the block and task management step, for efficiently assigning, releasing, and managing the channel resource. Finally, we evaluate the performance through various numerical examples when applying our proposed channel block assignment and resource management methods.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• 한국유통학회지:유통연구
• /
• 제1권1호
• /
• pp.83-107
• /
• 1996

The concern of external environment is growing up in the field of channel distribution. In the former channel distribution, the channel distribution environment is little bit unmoveable owing to a powerful manufacture control against poor distributor. Therefore intra-efficiency is channel member's core interest. The structure of channel governance, however, come to be changable because of the mature distributor power against manufacturer such as a Price Break, JIT of channel governance, and a serial of change. Accordingly, it is acceptable that the interest of external-environment of channel members' is more and more enlarged, and external-environment change in the channel distribution make the serious problems in intraorganizational system. Thus, it is meaningful that this study try to discover the consumer power as external environment factor and to find the best strategy to overcome this consumer power. Resource dependence theory, Transaction cost theory, Political Economic Approach, and Working partnership Approach are the theory foundation of the reasearch. Apparel franchise is a sample to analyse the hypothesis and correlation and multi-regression are a chief tools to estimate the hypothesis. Thus, the above results imply that a flexible governance is appropriate to consumer power, conflict is not intervening value between consumer power and channel governance, and the channel member's satisfaction can be confirmed in the flexible governance better than control governance.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.44-48
• /
• 2008

Hole mobility characteristics of two representative biaxially strained SiGe/Si structures with high Ge contents are studied, They are single channel ($Si/Si_{1-x}Ge_x/Si$ substrate) and dual channel ($Si/Si_{1-y}Ge_y/Si_{1-x}Ge_x/Si$ substrate), where the former consists of a relaxed SiGe buffer layer with 60 % Ge content and a tensile-strained Si layer on top, and for the latter, a compressively strained SiGe layer is inserted between two layers, Owing to the hole mobility performance between a relaxed SiGe film and a compressive-strained SiGe film in the single channel and the dual channel, the hole mobility behaviors of two structures with respect to the Si cap layer thickness shows the opposite trend, Hole mobility increases with thicker Si cap layer for single channel structure, whereas it decreases with thicker Si cap layer for dual channel. This hole mobility characteristics could be easily explained by a simple capacitance model.