• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.229-236
• /
• 2017

This paper deals with the design and implementation of an efficient topology for cascaded multilevel inverters with reduced part counts. In the proposed design, a well-established basic unit is first developed. The series extension of this unit results in the formation of the proposed multilevel inverter. The proposed design minimizes the number of power electronic components including insulated-gate bipolar transistors and gate driver circuits, which in turn cuts down the size of the inverter assembly and reduces the operating power losses. An explicit control strategy with enhanced device efficiency is also acquired. Thus, the part count reductions enhance not only the economical merits but also the technical features of the entire system. In order to accomplish the desired operational aspects, three algorithms are considered to determine the magnitudes of the dc voltage sources effectively. The proposed topology is compared with the conventional cascaded H-bridge multilevel inverter topology, to reflect the merits of the presented structure. In continue, both the analytical and experimental results of a cascaded 31-level structure are analyzed. The obtained results are discussed in depth, and the exemplary performance of the proposed structure is corroborated.

• 한국식품조리과학회지
• /
• 제19권5호
• /
• pp.647-658
• /
• 2003

Foodservice at elementary schools has been provided nation-wide. It is predictable that foodborne diseases would increase continuously. Formation of a counterplan is urgently needed. This study was designed to identify the stage which contains the critical control points (CCPs) for the microbiological management of HACCP (Hazard Analysis Critical Control Point) at the foodservice provided at elementary schools. Foodservice places at four elementary schools in Seoul were sampled and the overall hygiene of cooking, utensils and equipment, employees, and environment by season were examined. The results showed that the number of bacteria in overall samples was increased and that E. coli, Salmonella and Staphylococcus by biochemical test emerged in more diverse samples in summer than in spring. Particularly, the number of aerial bacteria in summer was three-fold greater than that in either spring or winter. E. coli 0157 was not detected, although Salmonella was identified by PCR analysis in the meat knives, chopping boards, waste bins and meat dish at elementary school foodservice. According to this data, cross-contamination should be managed in the stage of mixing up the ingredients with improper equipments and insanitary treatments. Thus, the establishment of SSOP (Sanitation Standard Operating Procedures) and GMP (Good Manufacturing Practice) at elementary school foodservice is stringently required, along with sanitation education for workers and employees as CCPs.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.31-35
• /
• 2009

In the silicon wafer polishing process, the mounting stage of silicon wafer on the ceramic carrier block has been using the polishing template which utilizes the porous surface instead of traditional wax mounting method. Here in this article, the experimental study is carried out in order to study the wafer demounting by water jet and the effects of operating conditions such as the water jet flowrate and the number of water jet nozzles on the wafer demounting time. It is found that the measured wafer demounting time is inversely proportional to the water flowrate per nozzle, regardless of number of nozzles used; implying that the stagnation pressure by the water jet impingement is the dominant key factor. Additionally, by using the transparent disk instead of wafer, the air bubble formation and growth is observed under the disk, making the passage of water flow, and subsequently demounting the wafer from the porous pad.

• 융합보안논문지
• /
• 제15권4호
• /
• pp.91-97
• /
• 2015

기업체에서는 정보를 암호화 후 저장하는 것을 법적으로 의무화하고 있다. 하지만, 실제로 정보를 암호화하여 저장하면 검색 또는 수정 시 서버에서 사전에 반드시 복호화 과정을 수행해야만 한다. 그러므로 처리지연 시간이 발생하고, 효율성이 떨어진다. 이러한 작업은 서버에 부담을 주게 되므로 서버를 관리하는 업체나 관리자는 정보를 암호화하여 저장하지 않는다. 본 논문에서는 네트워크 환경에서 정보의 수집과 빠른 의사결정을 복호화 과정 없이 암호문을 수정할 수 있는 준동형 연산을 이용하여 안전성이 보장되고 빠른 처리가 가능한 효과적인 보안 데이터 관리 시스템을 설계하고 구현한다. 구현된 시스템은 보안성의 보장을 위해 기존의 암호화 알고리즘을 사용할 수 있다. 검색 시에는 키워드 검색 방식을 사용한다. 추가로 트랩도어를 사용함으로써 키워드가 노출되지 않고 검색 시마다 변경되어 키워드에 대한 정보가 노출되지 않는다.

• 디지털융복합연구
• /
• 제12권1호
• /
• pp.37-50
• /
• 2014

본 연구의 목적은 스마트폰 시장을 기업생태계 관점으로 바라보고 운영체제 플랫폼의 핵심 성공요인을 도출하고자한다. 그리고 제시한 요인들이 사용자수 증가에 따른 효용의 증가와 사용의도에 직접적으로 어떤 영향을 미치는지 검증하는데 있다. 이를 위해 운영체제 플랫폼의 주요 특성을 OS 호환성, OS향상가능성으로 제시하고, 사용자수에 따른 효용증가를 나타내는 네트워크 효과와 사용의도 간의 논리적 인과관계 설정하고 실증 분석했다. 연구결과, 운영체제의 OS호환성과 OS향상가능성은 네트워크 효과와 사용의도에 긍정적인 영향을 미치는 것으로 나타났다. 연구결과는 그동안 실증연구가 되지 않았던 운영체제 플랫폼 특성을 제시하고, 스마트폰 시장의 기업생태계 구축에 있어 플랫폼 특성이 어떤 역할을 했는지 논리적인 인과관계를 제시하여 학문적으로 뿐만 아니라 실무적으로도 크게 기여했다고 판단된다.

• 청정기술
• /
• 제13권1호
• /
• pp.34-45
• /
• 2007

고지혈증 치료제로 잘 알려져 있는 난용성 약물인 심바스타틴(simvastatin)을 대상으로 디클로로메탄을 용매로 사용하고 초임계 이산화탄소를 역용매로 사용하는 초임계 역용매 재결정법에 의해 약물 미세입자를 제조할 때, 운전 조건을 설정하는데 활용될 수 있는 가이드 라인을 제공하기 위하여 simvastatin/디클로로메탄/초임계 이산화탄소 3성분계 혼합물의 상거동을 연구하였다. 가변부피 투시 셀이 장착된 고압 상평형 장치를 사용하여 여러 가지 조건에서 3성분계 혼합물의 구름점(cloud point)을 측정함으로서 디클로로메탄과 초임계 이산화탄소의 혼합용매에서 simvastatin의 용해도를 온도, 압력, 용매 조성의 함수로 결정하였다. 주어진 온도에서 Simvastatin 약물의 용해도는 디클로로메탄의 조성과 압력이 증가할수록 온도가 감소할수록 증가하였다. 상거동 데이터를 바탕으로 교반기가 설치된 실린더 모양의 고압 용기에서 초임계 역용매 재결정 공정을 이용하여 simvastatin 약물을 미세입자로 제조하는 연구를 수행하였다. 운전 조건인 압력 ($8{\sim}12\;MPa$), 온도(303.15 K, 313.15 K), 이산화탄소 공급 속도, 교반 속도 (최대 3,000 rpm)를 변화시키면서 simvastatin 미세입자를 제조함으로써 재결정되는 약물 입자의 크기와 모양에 미치는 공정 변수들의 영향을 관찰하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.102-108
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for NOx controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2$, NOx and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective back-pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing NOx emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• Carbon letters
• /
• 제28권
• /
• pp.87-95
• /
• 2018

This study examined the influence of operating parameters on the electrosorptive recovery system of lithium ions from aqueous solutions using a spinel-type lithium manganese oxide adsorbent electrode and investigated the electrosorption kinetics and isotherms. The results revealed that the electrosorption data of lithium ions from the lithium containing aqueous solution were well-fitted to the Langmuir isotherm at electrical potentials lower than -0.4 V and to the Freundlich isotherm at electrical potentials higher than -0.4 V. This result may due to the formation of a thicker electrical double layer on the surface of the electrode at higher electrical potentials. The results showed that the electrosorption reached equilibrium within 200 min under an electrical potential of -1.0 V, and the pseudo-second-order kinetic model was correlated with the experimental data. Moreover, the adsorption of lithium ions was dependent on pH and temperature, and the results indicate that higher pH values and lower temperatures are more suitable for the electrosorptive adsorption of lithium ions from aqueous solutions. Thermodynamic results showed that the calculated activation energy of $22.61kJ\;mol^{-1}$ during the electrosorption of lithium ions onto the adsorbent electrode was primarily controlled by a physical adsorption process. The recovery of adsorbed lithium ions from the adsorbent electrode reached the desorption equilibrium within 200 min under reverse electrical potential of 3.5 V.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.45-52
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.16-21
• /
• 2015

Nitrous oxide($N_2O$) concentration in the atmosphere has been constantly increased by the human activities with industrial growth after the industrial revolution. One of factors to increase $N_2O$ concentration in the atmosphere is the $N_2O$ emission caused by the combustion of marine fuel. Especially, a sulfur component included in marine fuel oils is known as increasing the $N_2O$ formation in diesel combustion. Form this point of view, $N_2O$ emission from a ship is not negligible. On the other hand, Exhaust gas recirculation(EGR) that have thermal, chemical and dilution effect is effective method for reducing the NOx emission. In this study, an author investigated $N_2O$ reduction by using EGR on a direct injection diesel engine. The test engine was a 4-stroke diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of the engine was a fixed load of 75%. The experimental oil was a blend-fuel that were adjusted with sulfur ratio of 3.5%, and EGR ratio of 0%, 10%, 20% and 30%. In conclusion, diesel fuel that contained 3.5% sulfur component increased $SO_2$ emission in exhaust gas, and increment of EGR ratio reduced NO emission. Moreover, $N_2O$ emission was decreased as over 50% at EGR ratio of 10% and reduced 100% at EGR ratio of 30% compared with $N_2O$ emission of 0% EGR ratio.