• Journal of Pharmaceutical Investigation
• /
• 제15권4호
• /
• pp.186-197
• /
• 1985

Polymorphs of piperacillin monohydrate were prepared by various sedimentation methods from piperacillin base for the purpose of developing piperacillin preparations for oral use. Solubility and dissolution rate of each form of the polymorphs were compared with each other. It was found that Form IV showed the highest solubility and the fastest dissolution rate among four forms of polymorphs. In general, the solubility and dissolution rate of two amorphous forms, Form IV and II were higher than those of two crystal forms, Form I and III. The apparent dissolution rates in the artificial gastric juice within 60 minutes were $0.65{\times}10^{-6}mole{\cdot}min^{-1}\;cm^{-2}$ for From IV, $0.36{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From II, $0.30{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From III and $0.18{\times}10^{-6}mole{\cdot}min^{-1}{\cdot}cm^{-2}$ for From I, respectively.

• 대한토목학회논문집
• /
• 제38권1호
• /
• pp.19-28
• /
• 2018

거푸집의 탈형 시기는 콘크리트 구조물의 품질과 공사기간, 공사비에 영향을 주는 직접적인 요인으로 콘크리트 구조물의 안전성과 경제성을 확보하는데 중요한 요소이다. 국내 규정에서 거푸집 존치에 대한 규정을 제시하고 있으나 조기에 거푸집을 해체하여 콘크리트의 품질이 저하되고 있다. 이는 양생조건에 대한 이해가 부족하고 공사기간이 단축되길 원하기 때문이다. 따라서 본 연구에서는 콘크리트의 거푸집 탈형시기에 따른 양생조건이 압축강도에 미치는 영향을 시험을 통하여 평가하였다. 연구 결과 거푸집의 12시간 후 조기 탈형은 콘크리트의 28일 압축강도를 최대 약 40% 정도까지 저하시켰으며, 거푸집을 28일 동안 장기간 존치할 경우에는 28일 표준압축강도 대비 약 7%의 강도저하를 가져왔다. 결론으로 본 논문에서는 양생온도를 등가재령으로 고려하여 거푸집 해체 시기에 따른 콘크리트의 압축강도 추정식을 제안하였다. 이 제안식은 현장에서 거푸집 제거 후의 콘크리트 압축강도 평가에 활용될 수 있다.

• Architectural research
• /
• 제14권4호
• /
• pp.143-152
• /
• 2012

A form-finding procedure is presented for planar tensegrity structures. Notably, a simple decision criteria is proposed to select the desirable candidate position vector from the unitary matrix produced by the eigenvalue decomposition of force density matrix. The soundness of the candidate position vector guarantees faster convergence and produces a desirable form of tensegrity without any member having zero-length. Several numerical examples are provided to demonstrate the capability of the proposed form-finding process.

• 대한수학회보
• /
• 제42권1호
• /
• pp.189-201
• /
• 2005

In this article, we establish relations between the sectional curvature function K and the shape operator, and also relationship between the k-Ricci curvature and the shape operator for slant submanifolds in generalized complex space forms with arbitrary codimension.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.52-56
• /
• 2013

The purpose of this study is to evaluate the influence of form-oil on steam-cured concrete surface condition. Based, viscosity(high, medium, low) and flash point($26^{\circ}C$, $70^{\circ}C$) of form oil were considered as test variables. The digital image process method was applied for the extraction of air-void area from concrete surface. Test result showed that oil-based form oil reduced air-void by approximately 46% compared to water-based form oil, and the higher the viscosity was, the smaller air-void rate was. In addition, it was conformed that flash point of form oil had a considerable influence on the surface condition of steam-cured concrete.

• ALGAE
• /
• 제22권4호
• /
• pp.305-311
• /
• 2007

The summer algal flora and community of 15 uninhabited islands in Dochodo, southwestern coast of Korea, were investigated from 9 June to 16 September 2007. A total 53 species (10 green, 14 brown and 29 red algae) of marine algae were identified. Among 15 uninhabited islands, the number of species observed was the highest as 33 species at Jeongdo and Gyeongchido the least as 24 species at Hugdo and Mido. The dominant species were Enteromorpha compressa, Ishige okamurae, Gloiopeltis furcata, Ulva pertusa and Sargassum thunbergii. The algal zonation of intertidal zone was figured out by Gloiopeltis furcata, Caulacanthus okamurae – Ulva pertusa, Sargassum thungergii – Gelidium amansii, Sargassum horneri from upper to lower zone. The flora investigated could be classified into six functional groups such as coarsely branched form (39.6%), filamentous form (25.8%), sheet form (14.1%), thick leathery form (9.9%), jointed calcarious form (5.6%) and crustose form algae (4.9%).

• 수산해양교육연구
• /
• 제26권5호
• /
• pp.1037-1043
• /
• 2014

We extensively observed macroalgal assemblages of species composition and biomass of summer benthic marine algae at Dokdo in the East sea of Korea. A total of 102 species (12 Chlorophyta, 36 Phaeophyta, and 54 Rhodophyta) were identified in quadrats and were analysed qualitatively to define the variation patterns. Biomass in dry weight according to various depths ranged between 146.0 to 764.2 g m-2 at study sites. Mean biomass at the investigated sites was greater in the 10m depth range than in the 5 and 15m depths at Dongdo. The flora could be classified into six functional groups: coarsely branched form (51.0%), filamentous form (17.7%), thick leather form (15.7%), sheet form (5.9%), jointed calcareous form (4.9%) and crustose form (4.9%). The R/P, C/P and (R+C)/P value were 1.67, 0.50 and 2.17, respectively. The number of marine algae species and the biomass in Dokdo area were markedly reduced as compared with those in the previous studies. This result suggests possible future changes in the algal vegetation, considering coastal marine environment of this area.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.367-375
• /
• 2012

In this study, hull form of main vessel of Korean large purse seiner fishing industry is developed for the improvement of resistance performance as well as for the satisfaction to the Standard of Fishing Convention, ILO. Through the modification of reference hull form parameters and local characteristics, the hull form development is carried out. The optimum hull form parameters are searched by Sequential Quadratic Programing(SQP) method with the power estimation method of Holtrop & Mannen. To minimize the wave resistance, bulbous bow parameters are determined by the bulbous bow design method of Alvarino. The plasmatic curve is redesigned from that of the reference hull by using Lackenby method. The resistance performances of the reference and designed hull forms are estimated by using numerical simulation method. Also, the judgment of seakeeping ability and the estimation of intact stability for the designed hull form is carried out. As a result, the optimum hull form is proposed. To verify the improvement of resistance performance, model tests are carried out in towing tank. The results show that the resistance of the designed hull form is about 14% smaller than that of the reference hull from at design speed. A new hull form proposed in this study can contribute to the development of the main vessel hull form of Korean large purse seiner fishing system.

• East Asian mathematical journal
• /
• 제38권5호
• /
• pp.583-591
• /
• 2022

Let K be an imaginary quadratic field and 𝒪 be an order in K. Let H_𝒪 be the ring class field of 𝒪. Furthermore, for a positive integer N, let K_𝒪,N be the ray class field modulo N𝒪 of 𝒪. When the discriminant of 𝒪 is different from -3 and -4, we construct an extended form class group which is isomorphic to the Galois group Gal(K_𝒪,N/H_𝒪) and describe its Galois action on K_𝒪,N in a concrete way.

• 한국건축시공학회지
• /
• 제13권6호
• /
• pp.522-529
• /
• 2013

As concrete forms, panel forms made of plywood used to be widely used, but recently a system form made of aluminum has been broadly adopted because of the advantages it offers in terms of constructability and economy. However, an aluminum form reacts with concrete, which is alkali, and creates hydrogen gas. As a result, air pockets occur on the concrete's surface, and its finishability deteriorates. Therefore, this research analyzed the relationship between the distribution of voids and surface roughness and the damage degree and number of uses of the aluminum form. The analysis of the distribution of voids shows that the number of voids of 0.1~1 mm, which are considered to have occurred because of chemical reaction, was 200~500 on the coating plywood, but was 1 500~2 000 on the aluminum form after 3 uses, and impossible to count after a higher number of uses. Surface roughness was $1.7{\sim}3.2{\mu}m$ on the coating plywood form, but was about $2.6{\mu}m$ after the first use and about $6.8{\mu}m$ after 10 uses, a 2.6-fold increase. Distribution of voids did not show a particular tendency depending upon the degree of damage to the concrete form, but surface roughness showed an increasing tendency as the degree of damage grows. Therefore, when using aluminum forms, surface maintenance should be carried out completely, such as prevention of damages to the form surface coating materials and spreading of separating materials on forms.