• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.219-229
• /
• 2017

Forest road is an essential infrastructure for forest management such as the composition and management of forest resources, timber and forest byproduct production & transportation. It has recently been utilized forest recreation and forest sports as well as also forest pest control, forest fire prevention and evolution. When you build a forest road, the economic function in the forest is activated, so that it can result in the ripple effect of induced employment, value-added creation and production inducement. The purpose of this study is to analyze the impact caused by forest road construction occurring as the overall economy. For analysis it was applied to inter industry analysis method that is a method for analyzing the quantitative cross-correlation. The data were used in the Input-Output Tables In 2014, the Bank of Korea. When you build a forest road, economic effect due to the construction of the forest road is generated and economic effects are also generated due to the increase in the production of forest products after the construction of the forest road. Therefore, we will analyze the economic impact of the two effects. The estimated economic value of forest products, which is the economic effect of forest product cultivation, was calculated through some assumptions and the economic ripple effect was analyzed. The forest road construction sector is defined as land clearing and reclamation, and irrigation project construction and the forestry forest products sector is defined as the sum of raw timber, edible forest products and misc. forest products. In total, 32 sectors were classified, and except for the two sectors defined as forest road construction and forestry forest products, the remaining sectors were integrated according to the classification system of 30 integrated classifications of the Bank of Korea. As a result, the production inducement coefficient for forest construction was analyzed to be 2.767 and the production inducement coefficient for forestry forest products was analyzed to be 1.565. This means that 2,767 times the production of forest road construction investment is induced in the whole industry and the production of 1.562 times the amount of forestry forest products is caused by the whole industry as the production of forestry forest products increases. The value added inducement coefficient for forest road construction was 0.977 and the value added inducement coefficient for forestry forest products was 0.985. Forest road are essential infrastructure for forestry development and should be continuously invested because they are essential elements of timber production and forest byproduct production with functions such as forest management, forest recreation, forest sports, and town connection.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.26-32
• /
• 1984

This research was conducted to examine the effect of bonding on the bending and shear strength of COMPLY-board when used with meranti face veneer and fire retardant treated particle-board core. For ammonium sulfate, modulus of rupture (MOR) of COMPLY-board increased with increasing chemical concentration up to 10 percent and then decreased after that concentration. However, Minalith showed reverse effect to the result for ammonium sulfate. Modulus of elasticity (MOE) of COMPLY-hoard decreased with increasing chemical concentration and its differences were not significant between concentration. Shear strength was shown better when treated with ammonium sulfate than with Minalith. Wood failure of COMPLY increased with increasing chemical concentration up to 15 percent and then decreased after that concentration. The products of parallel and cross veneer laminated were better than those of COMPLY composed of fire retardant treated particle-board core. Non-treated particle-board was the least in strength. MOE of fire retardant treated COMPLY increased by 136 percent and its MOE by 170 percent as compared with non treated particle-board.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.3
• /
• pp.15-24
• /
• 2022

In 2000, a total of 23,794ha of forest was lost due to the East Coast forest fire, and about 70% of the damaged area was concentrated in Samcheok. In 2001, artificial restoration and natural restoration were implemented in the damaged area. This study was conducted to understand the current vegetation structure 21 years after the restoration of forest fire damage in the Samcheok, Gumbong Mountain area. As a result of classifying the vegetation community, it was divided into three communities: Quercus variabilis-Pinus densiflora community, Pinus densiflora-Quercus mongolica community, and Pinus thunbergii community. Quercus variabilis, Pinus densiflora, and Pinus thunbergii planted in the artificial restoration site were found to continue to grow as dominant species in the local vegetation after restoration. As for the species diversity index of the community, the Quercus variabilis-Pinus densiflora community dominated by deciduous broad-leaf trees showed the highest, and the coniferous forest Pinus thunbergii community showed the lowest. Vegetation in areas affected by forest fires is greatly affected by reforestation tree species, and 21 years later, it has shown a tendency to recover to the forest type before forest fire. In order to establish DataBase for effective restoration and to prepare monitoring data, it is necessary to construct data through continuous vegetation survey on the areas affected by forest fires.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.417-430
• /
• 2020

The flame retardancy, such as carbonized length and area, of four plank type wood products by the spreading concentration and impregnation time of flame retardant were measured according to standard of the Nation Fire Agency in Republic of Korea. To measure the flame retardancy, Korean pine plywood, Japanese larch plywood, Japanese cypress planks, and perforated birch plywood boards were treated with self-development flame retardant by 300 and 500 g/㎡ spreading concentration and those were compared with control specimen. In general, the flame retardant performance of wood products improved as the spreading concentration of flame retardant increased. Except for Japanese larch plywood, there was no significant difference in the flame retardant performance by the spreading concentration. The flame retardant performance of perforated birch plywood board was positively correlated up to 60 minutes of impregnation time, but then gradually decreased. These results about the flame retardancy of wood products by spreading concentration and impregnation time were expected to be basic data for improving flame-retardant treated wood.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.244-250
• /
• 2012

The objective of this study was to analyze the above-ground biomass and crown fuel characteristics of Pinus densiflora stands in Yangyang, Gangwon province. A total of thirteen representative trees were destructively sampled in Yangyang region. The results showed that the stem density ($g{\cdot}cm^{-3}$) was 0.347~0.409, whereas the above-ground biomass expansion factors ranged from 1.251~1.419. In terms of crown fuel biomass, the above-ground biomass was $161.6Mg{\cdot}ha^{-1}$ while the stem biomass, branch biomass and needle biomass were $126.4Mg{\cdot}ha^{-1}$, $29.3Mg{\cdot}ha^{-1}$ and $5.9Mg{\cdot}ha^{-1}$, respectively. Needles and twigs with less than 1 cm diameter accounted 45.2% of the total crown fuel load. The available crown bulk density, which was calculated by dividing the crown fuel load to the crown volume, was $0.178kg{\cdot}m^{-3}$. The results of this study on the biomass and carbon stocks estimation of the Pinus densiflora together with the crown fire hazard assessment based on crown fuel loads are very significant information for the forest managers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.139-147
• /
• 2004

We have isolated two bacterial strains, FM-02 and AL-02, which produced EPS from forest soil for the restoration of forest fire by promoting soil aggregation. FM-02 was found to be Gram negative rod and belong to Beta Proteobacterium sp. through 16s-rDNA sequence analysis, and AL-02 was Gram positive rod and showed 81% of similarity to Zoogloea sp. through the analysis of 16s-rDNA sequence. FM-02 and AL-02 produced about 1.8g and 8.3g of EPS, respectively, per 1L of culture as dry weight. Flocculation activity (FA) was also measured in two strains. FM-02 showed 2.31 FA against active carbon, and AL-02 showed 6.21 FA against kaolin clay. From these results, we expect that AL-02 strain will be applied as a good biological material for the reduction of forest soil erosion by wild and rain after fire through promoting coagulation of soil particles.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.404-415
• /
• 2000

This paper describes several performances and nondestructive inspection for deterioration due to forest fires in overhead transmission lines. After discussing corrosion mechanism such as atmospheric and galvanic corrosion for aged ACSR conductors and its detection for them are presented. Through impedance analysis of a solenoid coil, it is shown that the eddy current sensor may be available to inspect severe fault or local corrosion. As the solenoid coil changes its impedance when the test conductor is inserted into the coil, it can be possible to measure deterioration degree caused by forest fires. Tensile strength, extension rate and sensor impedance are tested for some samples degraded by artificial fire. As increasing blazed period to some extent, the strength of aluminum strand begins to be reduced remarkably, while galvanized steel strand holds the similar strength to the initial value, despite of appearing a little loss of zinc layer. In general, it is shown that the sensor impedance would be increased while the tension load of conductor is reduced and the extension rate is contrarily increased. Therefore, the sensor output could exhibit the changes of mechanical performances, and would be used to detect such deterioration caused by forest fire in ACSR conductors built on the ridge of mountains. Finally, it was verified that the solenoid coil could be applicable to obtain any crucial inform for serious deterioration due to forest fires.

• Korean Journal of Plant Resources
• /
• v.35 no.2
• /
• pp.169-182
• /
• 2022

This study was conducted to predict the distribution of rare·endemic plants (Sophora koreensis Nakai) in the border forests where wildfire damage occurred and to quantify the damage. For this purpose, we tried to derive more accurate results through forest area damage (NBR) according to the Burn severity of wildfires, damage by tree species type (Vegetation map), and MaxEnt model. For Burn severity analysis, satellite imagery (Landsat-8) was used to analyze Burn severity (ΔNBR2016-2015) and to derive the extent of damage. To prepare the Vegetation map, the land cover map prepared by the Ministry of Environment, the Vegetation map prepared by the Korea Forest Service, and the vegetation survey conducted by itself were conducted to prepare the clinical map before and after the forest fire. Lastly, for MaxEnt model analysis, the AUC value was derived by using the habitat coordinates of Sophora koreensis Nakai based on the related literature and self-report data. As a result of combining the Maxent model analysis data with the Burn severity data, it was confirmed that 45.9% of the 44,760 m² of habitat (predicted) area of Sophora koreensis Nakai in the wildfire damaged area or 20,552 m², was damaged.

• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.29-39
• /
• 1970

Forest fires often destory forests that have taken years to grow in a few minutes. Forest fire therefore, is an important problem in forest management and have caused heavy losses to the nations economy. In order to resolve this problem many investigations have been made in many countries. However, ecological studies on the forest after accidental fire have not yet been made in Korea. In order to conduct such a study, a burned area on Mt. Samak which is located at Dukduwon-ri, Seo-myon, Chunsung-gun, Kangwon-do, was chosen as experimental plot in 1967. The remaining seeds were collected from the burned area, and investigations on their germination rate and their productivity were made comparing to those of the seeds of undemaged area, and following results were obtained. 1. The number of seed collected from the control plots were 740 while it was 537 from the test plots (Table 3, 4). It was considered that this difference between burned and unburned area was mainly due to the fact that some of the seeds had been burnt by the fire, and the unfavorable environmental conditions in the burned area was also considered to be a reason. In the germination rate in the control plots showed 28.1% while it was 3.2% in the test plots. This difference was considered to be due to complete loss of viability of the seed by burning and high heat. 2. In the test plots, sixteen seeds of the Alnus japonica were collected and six of these seeds germinated (index number 100) which was the highest germination rate among the species of collected seeds. From these results, it was considered that a high temperature (above $150^{\circ}C$) caused reduction of the germination rate (Quadrat. 1.2). Seeds of Carex lanceolata var. Nana, were appeared much more in the higher plots than in the lower plots and it seemed to be due to the fact that the forest floor plants were much more abundant in the lower plots than in the higher plots which is covered with shrubbery. And some small seeds midght be able to avoid the effect of fire being burried in the soil or under the gravel. 3. With Pinus densiflora, 43 seeds were collected, and 11 of these germinated in the control plots. However in the test plots, 11 seeds were collected and no seed germinated. This shows that the Pinus densiflora was the weakest in resisting to heat among the observed species in this study. 4. Without exception the germination rate showed a higher index in the herbs than in the woody plants and it is believed that the herbs produced more seed than the wood plants because of the abundance of herbs colony.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.279-283
• /
• 2009

This study was conducted to clarify the breeding bird communities between natural and fired forests in Verchneussuriisky Research Forest ($44^{\circ}$ 02' N, $134^{\circ}$ 10' E) Institute of Biology and Soil Science, Far-East Branch, Russian Academy of Science at Ussuri, Russia from 7 to 11 June 2008. Total 37 species of birds were recorded in both study sites. Luscinia cyane, Urosphena squameiceps, and Emberiza tristrami were most dominant species. In natural forest, 115 individuals of 32 species were observed and bird species diversity (H') was 3.13. Sixty two individuals of 29 species were recorded and bird species diversity was 3.12 in fired forest. Bush and Canopy nesting guilds were higher in natural forest than in fired forest. But hole nesting guild was higher in fired forest. In foraging guilds, canopy foraging guild was most dominant in both study site. Air and bush foraging guilds were higher in natural forest. The differences of bird communities would be caused by differences of habitat conditions between study sites.