• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2015.05a
• /
• pp.545-570
• /
• 2015

Korea is among the ten countries with the largest R&D budget and the highest R&D investment-to-GDP ratio, yet the subject of security and protection of R&D results remains relatively unexplored in the country. Countries have implemented in their legal systems measures to properly protect cutting-edge industrial technologies that would adversely affect national security and economy if leaked to other countries. While Korea has a generally stable legal framework as provided in the Regulation on the National R&D Program Management (the "Regulation") and the Act on Industrial Technology Protection, many difficulties follow in practice when determining details on security management and obligations and setting standards in carrying out national R&D projects. This paper proposes to modify and improve security level classification standards in the Regulation. The Regulation provides a dual security level decision-making system for R&D projects: the security level can be determined either by researcher or by the central agency in charge of the project. Unification of such a dual system can avoid unnecessary confusions. To prevent a leakage, it is crucial that research projects be carried out in compliance with their assigned security levels and standards and results be effectively managed. The paper examines from a practitioner's perspective relevant legal provisions on leakage of confidential R&D projects, infringement, injunction, punishment, attempt and conspiracy, dual liability, duty of report to the National Intelligence Service (the "NIS") of security management process and other security issues arising from national R&D projects, and manual drafting in case of a breach. The paper recommends to train security and technological experts such as industrial security experts to properly amend laws on security level classification standards and relevant technological contents. A quarterly policy development committee must also be set up by the NIS in cooperation with relevant organizations. The committee shall provide a project management manual that provides step-by-step guidance for organizations that carry out national R&D projects as a preventive measure against possible leakage. In the short term, the NIS National Industrial Security Center's duties should be expanded to incorporate national R&D projects' security. In the long term, a security task force must be set up to protect, support and manage the projects whose responsibilities should include research, policy development, PR and training of security-related issues. Through these means, a social consensus must be reached on the need for protecting national R&D projects. The most efficient way to implement these measures is to facilitate security training programs and meetings that provide opportunities for communication among industrial security experts and researchers. Furthermore, the Regulation's security provisions must be examined and improved.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.229-237
• /
• 2011

The pullout test is a nondestructive testing method certified by the American Society for Testing and Materials (ASTM) and British Standards (BS). Research has shown that it is very reliable in terms of evaluating the concrete strength of reinforced concrete members. However, the pullout test is rarely performed on domestic construction sites due to the complex procedures and high costs involved. This study proposes a new pullout test composed of a post installable break-off bolt, an insert nut, and a pullout tester, which satisfy both economical and practical purposes on a construction site. Three different types of special fastening methods, a temporary fixed bolt, a plastic fixed panel, and a fixed bar, have been developed. A pullout tester is proposed that is driven by the circle force introduced into a handle composed of eight gears without a load cell and a hydraulic cylinder. The serviceability and reliability of these instruments were investigated through experiments at construction sites. Furthermore, the sample pullout test with a wall specimen was conducted to estimate the usefulness of the temporary fixed bolt type of fastening methods and pullout devices. Eventually, the developed instruments will be useful on construction sites if minor requirements are met.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.50-57
• /
• 2007

Shocks are excited by impulsive forces and cause discomfort in vehicles. Current standards define means of evaluating shocks and predicting their discomfort, but the methods are based on research with a restricted range of shocks. This experimental study was designed to investigate the discomfort of seated subjects exposed to a wide range of vertical shocks. Shocks were produced from the responses of one degree-of-freedom models, with 16 natural frequencies (from 0.5 to 16 Hz) and four damping ratios (0.05 0.1, 0.2 and 0.4), to a hanning-windowed half-sine force inputs. Each type of shock was presented at five vibration dose values in the range $0.35\;ms^{-1.75}$ to $2.89\;ms^{-1.75}$. Fifteen subjects used magnitude estimation method to judge the discomfort of all shocks. The exponent in Stevens' power law, indicating the rate of growth in discomfort with shock magnitude, decreased with increasing fundamental frequency of the shocks. At all magnitudes, the equivalent comfort contours showed greatest sensitivity to shocks having fundamental frequencies in the range 4 to 12.5 Hz. At low magnitudes the variations in discomfort with the shock fundamental frequency were similar to the frequency weighting $W_b$ in BS 6841, but low frequency high magnitudes shocks produced greater discomfort than predicted by this weighting. At some frequencies, for the same unweighted vibration dose value, there were small but significant differences in discomfort caused by shocks having different damping ratios. The rate of increase in discomfort with increasing shock magnitude depends on the fundamental frequency of the shock. In consequence, the frequency-dependence of discomfort produced by vertical shocks depends on shock magnitude. For shocks of low and moderate discomfort, the current methods seem reasonable, but the response to higher magnitude shocks needs further investigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.493-503
• /
• 2018

Recently, as living standards have improved, many people are becoming more interested in health, and self-training is increasing through exercise to prevent and manage pre-illness. In general, an imbalance of muscles causes asymmetry of posture, which can cause various diseases by accompanying an adjustment force, circulation action, displacement of internal organs, etc.. In this study, the development of fitness software that can be self - training among smart wears has attracted considerable attention in recent years. In this study, a technology was proposed for the commercialization of self - trainer fitness wear by a simulation through Android - based applications. Self - trainer fitness software was developed by combining a conductive polymer, fashion design, sewing, and electric and electronic technology to monitor the unbalance of the muscles during exercise and make smart wear that can calibrate the asymmetry by oneself. In particular, a polymer sensor was fabricated by deriving the optimal MWCNT concentration, and the electrode signal was collected by attaching the electrode to the optimal position, where the electrode signal line using the conductive fiber was designed and attached to collect the signal. A signal module that converts the bio-signals collected through electrical signal conversion and transmits them using Bluetooth communication was designed and manufactured. Self-trainer fitness software that can be commercialized was developed by combining noise cancellation with Android-based self-training application using a software algorithm method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.553-560
• /
• 2014

The road tunnel install a vent for the purpose of ventilation and smoke control. Ventilation equipment capacity(number of jet fans) depends on from the condition that of the pressure and ventilation resistance. Pressure and the resistance under operating vehicle have affected on the drag coefficient. The drag coefficient of the tunnel have affected by the blockage effect and slipstream effects. However, when calculating the ventilation fan, are not properly consider taking into account such effects. Therefore, ventilation force may have been slightly overestimated. This paper describes the drag coefficient through a numerical analysis to calculate the equivalent resistance area that reflects the vehicle distance, and examined the equivalent resistance area. The ventilation coefficient corresponding to the result heavy vehicle mixing ratio of the present study was not clear. Equivalent resistance area had reduced by about 86% compared to the road design handbook current standards. Also it had analyzed and reduced to 62.2% compared to Korea Highway Corporation ventilation design criteria ratio, which is the old standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2242-2248
• /
• 2015

The damages from greenhouses collapsing due to heavy snowfall in winter are increasing, and the current frames of greenhouse are required to be improved. This study was conducted to seek solutions to improve intensities of greenhouse frame to bear heavy snows. We investigated a structural safety of greenhouses by calculating axial force, bending moment and combined stress when snow load was increased up to 30% of the current standard ground snow load of the conventional greenhouse types (07-single type 3, 07-single type 18) in the three regions (Gyeongju, Sokcho, and Gangneung) where were most damaged by recent heavy snows. In addition, we determined what structural type was most efficiently bear snow loads by measuring the differences between the load bearing strength according to the changes of tube diameter and thickness or the rafter spacing of greenhouses circular pipe. MIDAS GEN program was used in the analysis. As a result, with the snow load increase of 30%, greenhouse in Gyongju was still safe, but in Sokcho was at a risk, and in Gangneung was possible to be collapsed even in the current snow load. Increased pipe diameter than increased pipe thickness was more efficient in terms of improved performance of greenhouse structure. Accordingly, it is suggested to revise standards of greenhouse to increase pipe diameter of rafter for minimizing damages by heavy snow.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.17-25
• /
• 2011

This paper aims to find the optimal control gain for enhancing the convenience of electric walking frames and design a control algorithm. With the recent advances in medical technology, there has been a rapid increase in the aging population and a variety of mobile walking frames have been developed for improvement of the quality of life. However, the manual walking frames of such mobile aids don't have any electric motor which helps facilitate elderly users' walking and thus are not efficient enough for the old people of weak strength to use especially when moving on uneven surfaces such as slopes or thresholds. The types of electric walking frames have been developed to overcome such inefficiency. Electric walking frames require users' control operations for motor driving unlike manual frames. Therefore, when they are not properly handled, it causes considerable inconvenience to their users. The present study compared the electric walking frames with manual ones in terms of operational convenience and attempted to improve the user convenience of walking frames varying the control value for user convenience based on certain standards. This paper presented a haptic sensor designed to recognize the will to walk and measure the degree of convenience and proposed a control algorithm for improvement of convenience. For user convenience, this paper evaluated the relative convenience of walking frames in view of changing differences between the center of vehicle (COV) and the center of position (COP). With the employment of an electric walking frame and a new measuring method, all the processes were experimentally tested and validated.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.1
• /
• pp.97-105
• /
• 1999

Based on literature, status and role of the NP in America was reviewed. The process of developing NP program in America suggests us many things. In America, nurse practitioners have sustained a mutually beneficial status with their patients for over thirty years. Excel fence in academic education and clinical training will enable nurse practitioners to continue to provide quality health care. The magnitude changes in the health care system of the United States, the challange of providing real access of health care continues. Lack of access to adequate primary care was the driving force in the initial 1965 Federal Involvement in developing the NP role. In 1993 President Bill Clinton's health care reform initiative provided policy support for NPs as primary care providers. The Institute of Medicine explicitly recognized NPs as an integral part of the primary care team. In addition, several national reports recognized NPs as affordable, accessible, high-quality care providers. The recent passage of direct Medicare reimbursement for NPs reflected public policy statements coincided with and likely contributed to a growth spurt in the NP workforce. From 1965 to 1977 NP programs offered traditional primary care clinical tracks(adult, family, woman's health, and pediatrics) for relatively small clusters of students in a variety of institutional settings. From 1978 to 1990 these educational programs were incorporated into graduate schools of nursing. By 1990 the majority of NPs received educational preparation in master's-level nursing programs. A new emphases was placed on postmaster's NP programs designed for master's prepared clinical nurse specialists and nurse managers. he the health care system shifted hospital nursing resources toward community-based care, these master's -level nurses sought additional NP preparation. NP educational programs are defined as the educational structure in which one or more NP clinical tracks are offered. NP clinical tracks, in turn, offer curriculum and supervised clinical experiences that match standards in specific practice areas such as family(FNP), adult(AUP), geriatrics(GNP), pediatrics(PNP), women's health (WHNP), neonatal (NNP), and acute care(ACNP). There were indications that NP practice was expanding into new clinical areas as evidenced by new types of tracks, particularly in acute care and psychiatry. The increase in acute care NP students likely reflects the increased demand from hospitals and other acute care settings. In Korea, change of nurse's role into nurse practitioner's role may have many difficulties. The need of health consumer, policy support of government, approval of medical care team are all essential component. Every nursing personnel make effort to planning the new health care delivery system.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.127-152
• /
• 2020

Despite growing international cooperation for maintenance of international peace and security, wars continue to occur due to conflicted state interests. Continuing conflicts has advanced development of various weapon systems such as global integrated intelligence, surveillance and reconnaissance. However, with a big increase in the number of civilian casualties caused by the weapon systems development, the international community has also advanced diplomatic efforts to minimize deaths of civilian and military personnel. Therefore, it is essential to observe the principle of discrimination between combatants and non-combatants when operating unmanned aerial vehicles (UAVs), better known as drones. Drones have become more capable of distinguishing combatants from non-combatants due to its high-tech prowess. In the operation of drones, any parties involved in combat or the war are responsible for mounting civilian casualties. In addition, it should comply with the principle of proportionality that calls for a balance between results of such action and expected military advantage anticipated from the attack. The rule of proportionality prohibits use of military force which may be expected to cause excessive civilian harm. Drones have been able to track and monitor targets for hours and select the accurate locations of the targets. The aim is to reduce civilian losses and damage to a minimum. Drones meet the standards of Article 51.4 of the Additional Protocol.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.72-79
• /
• 2010

The significant of continuous welded rail (CWR) management is growing because KORAIL has the plan to convert the whole of conventional railway lines into CWRs through continuous activities since constructed the CWR track with 1.8km in Gyeongbu line in 1966. The CWR recently is needed a efficient management method because it is difficult to manage the CWR by the poor of technic and equipment, limited maintain labor force and shorted the maintain work time of CWR caused by industrialization, greenhouse effect and global warming In this point, The 70ton Tenser's which is using in the rail site has been analysised with no extra tenser's capacity in case of the under low temperature and exceed the length of 1km as a result of reviewing the CWR-related rules and standards, a series of records of safety accidents, operation obstacles, and the situation of broken rails published by KORAIL, existing rail temperature measurements, and CWR researches. Therefore avoid the excessive plan of the first set-up section, choice the proper time in the normal temperature that is possible to weld the rail, turning the difference of rail temperature and Installation temperature down is desirable.