The large quantity of green cull bananas has the potential of being used industrially and, thereby, to improve banana economics and eliminate the large environmental problem presented by banana waste. Wastewaters from textile, cosmetics, printing, dying, food colouring, and paper-making industries are polluted by dyes. The adsorption of basic dye by waste banana pith was investigated by varying dye concentrations, adsorbent dose, particle size and agitation rate. The adsorption capacity was found to be maximum value of removal by using 0.1 g of sorbent with particle size 1mm at mixing speed 200 rpm for initial concentration 25 mg/l to reach value of approximate 89%. The Langmuir, Temkin and Freundlich adsorption models were used for mathematical description of the adsorption equilibrium and it was found that experimental data fitted very well to these models except Langmuir model. Adsorption of dye was applied on (pseudo-first and pseudo-second-order kinetics), and the experimental data was more fitted to pseudo second order. The results of this study showed that banana pith could be employed as effective and low-cost materials for the removal of dyes from aqueous solutions.
This study aim to use the GTAP model to analyze the impact of RCEP Fermentation in the Korean manufacturing industry by quantifying the RCEP tariff commitment table. The research results show RCEP has boosted output in all sub-manufactures except wood and printed matter due to increased export volumes. Wood products, on the other hand, are more reliant on imports due to lower production due to lower domestic sales or overall exports. After RCEP came into effect, the import and export scale of Korea's manufacturing industry expanded effectively. Among them, the positive impact on the intensive low-tech manufacturing industries such as clothing and leather products, wood products and printing products, and food, beverage and tobacco products is greater than the positive impact on the technology-intensive medium and high-tech and high-tech manufacturing industries. And found that the growth rate of Korea's manufacturing trade is basically proportional to the tax reduction rate of RCEP. Finally, in order to promote the development of the manufacturing industry, some suggestions are put forward that need the government's policy support and strengthen the regional cooperation with RCEP member countries.
현재 침출용 티백은 그 편리성으로 인하여 전 세계적으로 녹차, 홍차, 커피 등에 다양하게 이용되고 있어 안전성 측면에서 침출용 티백에서 유래될 수 있는 가소제와 유해중금속의 잔류실태 및 식품으로의 이행정도를 조사하였다. 먼저 GC/FID를 이용하여 DEHA, DEHP등 총 16종의 가소제를 동시 분석할 수 있는 분석조건을 확립하였다. 이때 각 가소제 성분에 대한 회수율은 $82.7%\sim104.6%$ 범위였으며, RSD $0.6%\sim2.7%$, 상관계수 $0.9991\sim0.9999$로서 우수한 재현성 및 직선성을 나타내었다. 동 시험법을 적용하여 국내 유통 중인 침출용 티백 재질 143품목에 대하여 재질중에 함유된 가소제를 분석한 결과, 16종 모두 불검출이었고 침출용 티백 재질을 $95^{\circ}C$ 물에서 30분간 침출시켜 식품으로 이행되는 양을 분석한 결과에서도 16종의 가소제가 모두 불검출이었다. 또한, 티백 재질중 유해중금속인 납, 카드aba, 비소 및 알루미늄의 함유량을 ICP/AES를 이용하여 분석한 결과, 티백 재질당 납은 $trace\sim23{\mu}g$, 알루미늄은 $0.6\sim1718{\mu}g$으로 검출되었고, 카드뮴 및 비소는 모두 trace로 검출되었다. 티백 재질을 $95^{\circ}C$ 물에서 30분간 침출한 액에서는 티백당 납 및 알루미늄은 각각 $trace\sim11.5{\mu}g$ 및 $trace\sim20.8{\mu}g$으로 검출되었고, 카드뮴 및 비소는 모두 불검출이었다. 따라서 차를 음용하는 시간동안 침출용 티백으로부터 가소제 및 중금속의 이행에 따른 문제점은 없는 것으로 사료된다.X>$114.03{\pm}19.04mg%$, 된장이 $734.32{\pm}147.70mg%$, 청국장이 $600{\pm}150mg%$ 이었다. 색도를 측정한 결과 L(명도), a(적색도) 및 b(황색도)값의 평균치는 고추장은 각각 $14.49{\pm}1.44,\;15.45{\pm}1.77$및 $8.34{\pm}1.02$로 나타나 적색도에 있어서 다소 낮게 나타났고, 된장은 각각 $26.69{\pm}4.33,\;7.25{\pm}1.03$ 및 $12.02{\pm}1.82$로서 명도와 황색도가 다소 낮게 나타났다. 청국장은 각각 $35.62{\pm}2.05,\;6.31{\pm}0.37$ 및 $13.50{\pm}0.78$로 나타나 명도와 황색도에 있어서 다소 낮게 나타났다.m25$에 9.4%를 나타내었다. 신체발달점수에서 남대생은 68.3%가 $75\sim85$이었고, 86 이상이 25.3%로 나타난 반면, 여대생은 표준범위가 63.6%의 분포를 나타내었다. 여대생의 나트륨 섭취는 연령과 0.082의 유의성을 나타내었고, 남대생의 복부 지방률은 연령과 0.011의 유의적 차이를 나타내었으며, 여대생의 체단백질랑은 나트륨섭취와 -0.276의 음의 상관관계를 나타내었다. 따라서 본 조사에 의하면 탄수화물:단백질:지방 비율이 $46\sim54:16\sim17:30$ 이상의 수준이었고, 섬유소는 권장량의 20%, 칼슘은 권장량의 $77\sim83%$, 나트륨은 권장량의 $2\sim3$배를 섭취하였는데, 이러한 섭취경향은 체성분에서 특히 남대생 94%가 체단백질량이 표준이상인 반면 남대생
Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.
Dong Hyun Hong;Jongwon Jung;Jeong Hun Jo;Dae Hwan Kim;Ji Young Ryu
Annals of Occupational and Environmental Medicine
/
제35권
/
pp.6.1-6.15
/
2023
Background: Polycyclic aromatic hydrocarbons (PAHs) are occupational and environmental pollutants generated by the incomplete combustion of organic matter. Exposure to PAHs can occur in various occupations. In this study, we compared PAH exposure levels among occupations based on 4 urinary PAH metabolites in a Korean adult population. Methods: The evaluation of occupational exposure to PAHs was conducted using Second Korean National Environmental Health Survey data. The occupational groups were classified based on skill types. Four urinary PAH metabolites were used to evaluate PAH exposure: 1-hydroxypyrene (1-OHP), 2-naphthol (2-NAP), 1-hydroxyphenanthrene (1-OHPHE), and 2-hydroxyfluorene (2-OHFLU). The fraction exceeding the third quartile of urinary concentration for each PAH metabolite was assessed for each occupational group. Adjusted odds ratios (ORs) for exceeding the third quartile of urinary PAH metabolite concentration were calculated for each occupational group compared to the "business, administrative, clerical, financial, and insurance" group using multiple logistic regression analyses. Results: The "guard and security" (OR: 2.949; 95% confidence interval [CI]: 1.300-6.691), "driving and transportation" (OR: 2.487; 95% CI: 1.418-4.364), "construction and mining" (OR: 2.683; 95% CI: 1.547-4.655), and "agriculture, forestry, and fisheries" (OR: 1.973; 95% CI: 1.220-3.191) groups had significantly higher ORs for 1-OHP compared to the reference group. No group showed significantly higher ORs than the reference group for 2-NAP. The groups with significantly higher ORs for 1-OHPHE than the reference group were "cooking and food service" (OR: 2.073; 95% CI: 1.208-3.556), "driving and transportation" (OR: 1.724; 95% CI: 1.059-2.808), and "printing, wood, and craft manufacturing" (OR: 2.255; 95% CI: 1.022-4.974). The OR for 2-OHFLU was significantly higher in the "printing, wood, and craft manufacturing" group (OR: 3.109; 95% CI: 1.335-7.241) than in the reference group. Conclusions: The types and levels of PAH exposure differed among occupational groups in a Korean adult population.
적절하지 않은 위치에 식립된 임플란트의 보철물은 심미적, 기능적 문제를 나타낼 수 있으나 이를 해결하기는 어려운 때가 많다. 이러한 경우에 재식립 혹은 연조직 및 경조직 이식을 포함하는 외과적 방법을 고려해 볼 수 있지만 결과 예측이 힘들며 긴 치유 기간 및 술 후 불편감과 추가적인 수술 비용이 동반된다. 반면, 보철적 방법으로는 치은 색상의 세라믹이 포함된 고정성 보철물을 제작하거나 가철성 보철물인 gingival mask 제작 등을 생각해볼 수있다. 본 증례에서는 80세의 남환이 과도하게 구개측으로 식립된 임플란트로 인한 상순과 보철물 사이의 음식물 저류에 대한 불편감 및 심미적인 부분에 대한 불만족을 주소로 내원하였고, gingival mask를 제작하여 단 기간 내에 만족스러운 결과를 얻었기에 이를 보고하고자 한다.
The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.
The present study was conducted to evaluate nutrient intakes of industrial workers with hyperlipidemia and cholesterol-saturated fat indices(CSI) of their daily meals and various side dishes accompanied with alcohol. Thirty eight male subjects of 41.0$\pm$6.5 years whose average serum cholesterol and triglyceride levels were 222.9$\pm$37.7 and 282.3$\pm$139.3mg/이 were interviewed on daily intakes of foods and drinking habits including types and amounts of side dishes using 24-hour recall and questionnaire methods. Average energy habits including twenty six non-drinkers and twelve drinkers were 2365$\pm$41 and 2822$\pm$417kcal, respectively but intakes of other nutrients were not very different between two groups. Carotene intakes was, however, low in drinkers. Intakes of saturated fat, cholesterol and CSI of subjects' daily meals were 15.4$\pm$5.4g, 229$\pm$114mg and 27.1$\pm$10.4 for non-drinkers and 18.7$\pm$7.8g, 238$\pm$69mg and 30.8$\pm$9.8 for drinkers. CSI of their daily meals varied from 10 to 60 without much differences in energy values and were positively correlated with serum cholesterol levels(r=0.2606, p<0.05). Average alcohol intakes obtained from subjects' drinking habit was 89.5$\pm$46.8g per day and major side dish was roasted beef giving 660$\pm$234kcal of energy and 24.3$\pm$8.0 of CSI. From the present study, it is concluded that industrial workers are more prone to have hyperlipidemic diets due to alcohol. To improve their diet and health, an appropriate nutrition education should be necessary and CSI of various Korean foods and meals can be used as handy self-control education tool.
It will be necessary to make proper management plans to preserve the air quality in good level for the public. In order to make these plans, source information and detail emission inventories of the city and near industrial areas should be given. However, lack of the source measurements data makes us more difficult to complete the source inventory. VOC source Inventory could be utilized for the feasibility study to estimate the contribution of VOC sources presenting to the receptor such as residential area. It may give policy maker an idea how to control the air quality, and improve their social environment in the area. This study shows data that measured VOCs concentrations from the local industrial areas in Jeonju during from May 2005 to January 2006. The samples were collected from the near sources in 7 major factories in the industrial park as well as 5 general sources in near city Jeonju area to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; chemical, food, paper, wood, metal, non-metal (glass), and painting (coating) industries. The 5 general sources are sampled from tunnel, gasoline gas station, dry cleaning shop, printing (copy) shop, and road pavement working place in urban area. To understand the near source effect at receptor, samples from the 2 receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected and analyzed for the comparison to source concentration. The mass contributions of the speciated VOC to total mass of VOCs measured from the different sources and ambient (2 receptors) were presented and discussed.
Hong, Khang Do Gia;Kim, Seong-Gon;Park, Young-Wook
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제45권5호
/
pp.276-284
/
2019
Objectives: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. Materials and Methods: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. Results: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups ($2.6{\pm}1.3days$), while the RP group required the least number of days to reach an 80% recovery rate ($7.8{\pm}2.2days$). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. Conclusion: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.