• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.234-237
• /
• 2001

In this study, efforts were made to understand the propagation of electromagnetic wave through the foam core sandwich structure by the analytical model. Foam core sandwich structure is composed of glass/epoxy composite skins and foam core. Transmittance and reflectance of the arbitrary linearly polarized incident TEM waves through the unidirectional composites, foam and foam core sandwich structures were determined as functions of thickness, fiber orientation of composites, incident angle and polarization angle by the analytical model. From the results of the analysis, the general tendency of transmittance and reflectance of electromagnetic wave through composites, foam and foam core sandwich structures was obtained.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.104-110
• /
• 2010

Cyclic deformations of polymer foam film are simulated using the finite element method. Material of polymer foam film is polypropylene (PP). The calculated polymer foam film is micro-scale thin film has cellular structure. The polymer foam film is used in ferro-electret applications. The polymer foam film is idealized to one cell structure as lens shaped stretched truncated octahedron model. Cyclic deformation is performed by uniaxial stretching. Stretching direction is perpendicular to plane of cellular film. Various cyclic strain amplitudes, pore wall thicknesses, pore shape are investigated to find deformation tendency of cellular structure. Consequently, cellular structure has various macroscopic stresses on cyclic deformation with various pore thickness and pore shape.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.47-53
• /
• 2018

Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition including large free space to accommodate the volume expansion of Sn. The Cu-Sn foam structure exhibits highly porous and numerous small grains. The result of EDX mapping and XPS spectrum analysis confirm that Cu-Sn foam consists of $SnO_2$ with a small quantity of CuO. The Cu-Sn foam structure electrode shows high reversible redox peaks in cyclic voltammograms. The galvanostatic cell cycling performances show that Cu-Sn foam electrode has high specific capacity of 687 mAh/g at a current rate of 50 mA/g. Through SEM observation after the charge/discharge processes, the morphology of Cu-Sn foam structure is mostly maintained despite large volume expansion during the repeated lithiation/delithiation reactions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.157-164
• /
• 2021

최근 미세먼지와 관련된 환경문제를 개선하기 위해 유해물질을 제거할 수 있는 광촉매와 흡착제에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 전체 공극량이 일반 건설재료에 비해 상당히 큰 폼 콘크리트에 다량의 마이크로 공극를 갖는 야자계 활성탄소를 이용해서 다공성 폼 복합체를 제작하였다. 미세먼지 흡착 가능성을 평가하기 위해 제작된 폼 복합체에 대해 공극 구조를 분석하였다. 폼 복합체의 공극구조 분석은 측정된 질소 흡착등온선으로부터 BET와 Harkins-jura이론을 적용하였다. 분석결과 활성탄소를 혼입한 폼 복합체의 비표면적과 마이크로 공극 부피가 Plain보다 크게 증가하였다. 활성탄소 혼입율이 증가할수록 폼 복합체의 비표면적과 마이크로 공극 부피가 증가하는 경향을 나타냈다. 이는 폼 복합체가 가스상의 미세먼지 전구물질 NO_X에 대한 흡착성능이 높을 것으로 보인다.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.785-792
• /
• 2012

Foam structure is usually hard to model due to the complexity of the geometry of cells. So, many simplified models to represent complicated foam structures have been proposed, but most of them are not actually describe the random feature of the cell structure well. So, in this study, two dimensional isotropic and anisotropic closed cell structures of the foam were modeled using the concept of Voronoi cells. The elasto-plastic deformation behavior under compressive loads was investigated by finitie element analysis, and the results were compared with ideal honeycomb structure. In addition, the effect of anisotropy of Voronoi cell structures of the foam on Young's modulus and yield stress under compressive loads was studied.

• 소성∙가공
• /
• 제11권8호
• /
• pp.701-709
• /
• 2002

Aluminium foam material is highly porous material, which has the complicated cellular structure defined by randomly distributed pores in metallic matrix. This structure gives the characteristic properties which cannot be achieved by any other conventional processes. As the properties of aluminium foam material significantly depend on its porosity, a desired profile of properties can be tailored by changing the foam density. But various defects lead to undesirable effects on the mechanical properties. Mechanical properties are dependent on cell sizes and aspect ratios. Therefore, this paper presents the effects of various processing parameters of various parameters on the mechanical properties. For the sake of this, combined stirring was used to fabricate aluminum foam materials by the parameters. Compression and bending tests were performed to investigate the effects of cell sizes and aspect ratios on the mechanical properties.

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.474-482
• /
• 2016

가벼운 다공성 구조재로서 널리 사용되는 캘빈 폼(foam) 재료의 탄성특성을 초음파를 이용하여 조사하였다. 캘빈 폼의 구조는 tetrakaidecahedron의 단위 셀(unit cell)이 규칙적으로 3차원 배열된 구조를 갖고 있는데 본 연구에서는 SoildWorks 프로그램에서 캘빈 단위 셀을 설계하고 ABS 플라스틱 재료를 이용하여 3차원 프린터로 제작한 후 초음파시험을 수행하였다. 캘빈 구조체는 기공이 많은 재료이기 때문에 초음파가 투과할 수 없어서 빈 공간을 모두 파라핀 왁스로 충진하여 초음파가 투과할 수 있도록 하였다. 파라핀을 충진한 캘빈 구조체는 초음파의 비행시간(TOF)을 이용하여 초음파 속도를 계산한 후, 이 복합 구조체에 대한 탄성 구조 모델을 기반으로 캘빈 구조체만의 탄성계수를 계산하였다. 측정된 캘빈 구조체의 탄성계수 값은 모재(ABS 플라스틱) 탄성계수의 약 3.4%가 되는 것으로 나타났는데 이 평가 결과는 선행된 연구 결과들에서 나타난 실험값이나 이론 해석 결과와 잘 일치하는 것을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.60-66
• /
• 2016

본 연구는 실리콘계 정포제의 특성에 따른 폴리우레탄 폼 지수제의 cell 구조와 흡수량 변화를 알아보기 위하여 6종의 정포제를 사용하여 폴리우레탄 폼 지수제를 제조하여 FE-SEM으로 분석한 결과 실리콘 정포제의 실록산 주사슬 말단에 PO n개가 결합되어 있는 DC-193, DC-2585, DC-5125, DC-198의 cell 구조는 close cell로 확인이 되었고, 실리콘 정포제의 실록산 주사슬 말단에 EO n개가 결합 되어 있는 DC-5043과 DC-5598은 open cell 구조로 나타났다. 또한 cell 구조 변화에 따른 흡수량 에서는 close cell의 크기가 가장 세밀하고 균일한 DC-193의 흡수량이 가장 적게 나타나 내수성이 가장 우수한 것으로 나타났으며 open cell의 크기가 가장 크게 형성된 DC-5043의 흡수량이 가장 많은 것으로 나타났다. 이들의 방수성능을 콘크리트 구조물을 모사하여 시험한 결과 누수가 없음을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.407-414
• /
• 2002

The knowledge of interaction of electromagnetic waves in composite structures is important for designing the shielding structure for antenna such as radome. Recently, radomes are constructed in the form of foam core sandwich structures that have many mechanical advantages such as high strength, long fatigue life, low density and adaptability to the intended function of structure. However, the propagation of electromagnetic waves is affected by high anisotropic permeability and loss tangent of the composite skin. In this study, the analytical model to understand the propagation of electromagnetic waves in the anisotropic composites and foam core sandwich structures with composite skins was proposed. Numerical analyses of unidirectional composites and foam core sandwich structure as a function of incident angle were performed. From the results of analysis, the general tendencies of transmittance of electromagnetic wave through composites and foam core sandwich structure were obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.388-393
• /
• 2004

A comprehensive numerical study on the three point bending behavior of Aluminum foam-filled stainless steel tube has been performed. Aluminium alloy foams with various densities were produced and their mechanical properites were evaluated. Finite element(FE) analysis of three point bending test was performed to evaluate bending behavior of foam filled cylindrical structures. Results showed that foam filling offered remarkable increase of bending resistance and enhanced the crashworthiness of the structure. It turned out to prevent the inward fold formation at the compression flange, resulted into the multiple propagating folds and increased the load carrying capacity.