• 제목/요약/키워드: Foam glass

검색결과 132건 처리시간 0.023초

폐유리를 활용한 불연 무기물 발포 보드 개발 및 성능평가 (Development and Performance Evaluation of Non-flammable Mineral Foam Board Using Waste Glass)

  • 김현수;최원영;김상헌;최승환;박순돈
    • 한국건설순환자원학회논문집
    • /
    • 제8권1호
    • /
    • pp.17-25
    • /
    • 2020
  • 본 연구에서는 폐유리 불연 무기물 발포 보드를 개발하고, 국내 시장에서의 사용 활성화를 위한 과정으로 물리적·역학적·환경적 특성 시험을 통해 건축 내외장재로 활용하기 위한 검증을 목적으로 한다. 이를 위해, 물리·역학적 특성으로 밀도, 흡수율, 압축강도, 내동해성에 대한 시험을 실시하였으며, 환경적 특성으로 열전도율, 불연성능, 가스유해성, 중금속 함유, 곰팡이 저항성 등의 시험을 실시였다. 또한, 실제 건축물 내외장재로 활용하기 위한 적용을 실시하여 실제 건축 자재로 활용하기 위한 검증을 진행하였다.

흡음 및 댐핑재 의한 주름강판의 차음성능 개선효과 (Improvement Effect of the Sound Insulation Performance of the Corrugated Steel Panel by Sound Absorbing and Damping Materials)

  • 김석현;서태건;김정태
    • 한국철도학회논문집
    • /
    • 제13권5호
    • /
    • pp.476-480
    • /
    • 2010
  • 철도차량의 바닥재에 널리 사용되는 주름 강판은 국부공진 효과에 의하여 특정 주파수 대역에서의 차음성능이 심각하게 저하된다. 그 대책으로, 본 연구에서는 우레탄 폼재를 주름내부에 충진시키거나 유리면층을 바닥재에 적층시킨 후, 차음성능의 향상효과를 실험적으로 평가한다. 주름강판 및 바닥 적층재를 대상으로 ASTM E2249-02에 근거하여 인텐시티 투과손실을 측정하고 평가한다. 본 연구의 목적은 폼 충진이나 유리면 적층이 중량 증가 측면에서 열차 차체의 차음성능을 어느 정도 향상시키는가를 규명하는 데에 있다.

감광유리를 이용한 MEMS 촉매 연소기의 제작 및 성능 평가 (Fabrication and Performance Test of MEMS Catalytic Combustors Using Photosensitive Glass Wafer)

  • 진정근;권세진
    • 대한기계학회논문집A
    • /
    • 제33권3호
    • /
    • pp.237-242
    • /
    • 2009
  • MEMS catalytic combustors were fabricated to use in micro-power sources as a heat source. The combustor was fabricated by photolithography and anisotropic wet etching of photosensitive glass wafers. Two different catalyst loading methods were used to complete the fabrication of the combustors. For thin film type, the $Al_2O_3$ was washcoated on the surface of the combustion chamber as a catalyst support, and for packed-bed type, ceramic foam was inserted after Pt was coated. The volume of the combustors was 1.8 $cm^3$ and 16W of heat was generated using the fabricated combustors with hydrogen. The energy density of combustor was about 8.9 W/$cm^3$.

고성능 진공단열재의 건축적인 적용에 관한 연구 (Research on the Architectural Applications of High-Performance Vacuum Insulation Panel)

  • 권영철;김석
    • 토지주택연구
    • /
    • 제10권3호
    • /
    • pp.23-32
    • /
    • 2019
  • 현존하는 단열재 중 가장 열전도율이 낮은 진공단열재(VIP; Vacuum Insulation Panel)는 특수한 재질의 외피재(Envelope)와 외피재 내부의 심재(Core Material), 그리고 단열재 내부의 공기를 흡착하는 흡착제(Getter)로 구성되어 있고, 단열성능을 극대화하기 위해 내부를 진공처리한 제품이다. 진공단열재의 외피재는 알루미늄 박막 필름이 주로 사용되며, 진공단열재의 수명 및 신뢰성을 결정하는 중요한 소재이다. 본 연구를 통하여 불연성이 확보된 Fiber Glass 심재 진공단열재의 방화성능 및 단열성능 확인과 함께 건축적인 적용가능성을 검토하였으며 그 내용을 정리하면 다음과 같다. 1) 20mm 두께의 Fiber Glass 심재 진공단열재의 열전도율이 0.00177W/m·K로, 두께 20mm로 지역별, 부위별 강화된 단열기준을 모두 충족할 수 있음을 알 수 있었다. 2) 진공단열재에 대한 불연성능시험과 가스유해성시험 결과, 불연재료로 적합한 것으로 나타났다. 3) 불연 진공단열재의 장기내구성 시험결과, 25년이 지나더라도 스치로폼 및 유리섬유에 비해 10배 이상의 단열성능을 유지할 수 있음을 알 수 있었다. 4) 건물의 외벽 열관류율 0.12W/㎡K 이하를 만족하기 위해, 준불연성능이 확보된 단열재인 "가"등급의 비드법 보온판 2종 4호와 페놀폼을 사용한다면 각각 280mm, 170mm 이상을 써야하지만, 불연 진공단열재는 20mm 두께로 동일 단열기준을 만족할 수 있는 것으로 나타났다.5) 고성능 진공단열재는 열관류율 0.12W/㎡K 이하를 기준으로 가격경쟁력이 페놀폼 대비 약 1,500원/㎡ 뛰어난 것으로 나타났다.

유리섬유 혼입 기포콘크리트의 배합변화에 따른 ,압축강도 특성에 관한 연구 (The Study on Compressive-Strength Property of the Aerated Concrete using Glass Fiber by Mixing Ratio)

  • 허재원;김효열;임남기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
    • /
    • pp.93-98
    • /
    • 2005
  • The purpose of this study was to analyze the compression strength research by aerated concrete as mixing ratio This Study used foaming-agent and produced aerated concrete by pre-foam way that is used in construction site. An experiment changes unit cement amount, w/c and the glass fiber mixing rate and 'measured capacity change, unit capacity weight and compressive strength. The results obtained from experimental study are as following; Research to reduce unit capacity weight in condition more than unit cement amount 500kgf is considered should be gone side by side. The highest compressive strength result appeared in aerated concrete that cement amount 600kgf and w/c ratio $45\%$, $50\%$. compressive strength was increased maximum $34%$ when glass fiber $0.7\%$ addition cause by coherence enlargement to enlargement of cement paste and glass fiber addition per unit volume

  • PDF

Cone-Calorimeter와 연기밀도챔버를 이용한 고무발포단열재의 연기밀도 비교 (Smoke Density Comparison of Rubber Foam Insulator by the test between Cone-Calorimeter and Smoke Density-Chamber)

  • 조희기;이덕희;이철규;이동우
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 추계학술대회 논문집
    • /
    • pp.941-946
    • /
    • 2005
  • Kinds of Sound & Thermal Insulator are being used for materials of railroad vehicles as a barrier of beat and noise. Glass Wool, PE foam, PP foam are such kinds of materials. In case of fire, it shows various combustion properties. In this study, we compared the Smoke Density of the Rubber Foam Insulator by test between Cone-Calorimeter and Smoke Density-Chamber. The results showed that the Rubber Foam Insulator had an important role in the insulator thickness and the test method, We forecast the smoke density by test between Cone-Calorimeter and Smoke Density-Chamber.

  • PDF

혼합 양에 따른 경질 폴리우레탄폼의 밀도 및 열전도율에 관한 연구 (A Study on the Density and Thermal Conductivity of Rigid Polyurethane Foam According to Mixing Amount)

  • 신종현;조수연;정의인;김봉주
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.127-128
    • /
    • 2021
  • Rigid urethane foam is widely applied because it is light and has superior insulation performance compared to insulation materials such as EPS or glass wool. However, it has the disadvantage of being vulnerable to fire. Therefore, in this study, before proceeding with the research to improve the fire resistance of the rigid polyurethane foam, we would like to investigate the change in density and thermal conductivity of the rigid polyurethane foam according to the change in the mixed weight of the main material and the curing agent. It was found that the density increased as the mixed weight increased. The thermal conductivity showed similar values overall. As for the density distribution, the central part was low and the outer part was high.

  • PDF

아두이노 센서를 활용한 폐유리 발포비드 혼입 식생블록의 온습도 유지성능 평가 (Evaluation of Temperature and Humidity Maintenance Performance with Vegetation Blocks Incorporating Waste Glass Beads Using Arduino Sensor )

  • 길민우;김규용;편수정;최병철;김문규;남정수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.125-126
    • /
    • 2023
  • Recently, heat island and dry island phenomena occur frequently due to land surface development and excessive energy consumption in urban areas. As a result, the surface temperature of the building and the entire temperature of its surroundings are increased, and as a result, the durability of the building is rapidly deteriorated. In order to suppress these causes, a method of maintaining the temperature of road heating wires was implemented as a temporary measure, but this did not predict climate change. Therefore, this study is a method to measure the compressive strength, density, and thermal conductivity of lightweight concrete using waste glass foam beads. After fabricating a simple chamber, the temperature and humidity of the inside and outside were measured with an Arduino device in consideration of external factors. Therefore, if waste glass foam beads made through proper mixing are constructed in the urban center, the quality of the urban can be improved.

  • PDF

스마트 환경 센서를 활용한 폐유리 골재 기반 식생블록의 온/습도 특성 (Temperature and humidity characteristics of waste glass aggregate-based vegetation blocks using smart environmental sensor)

  • 길민우;김규용;편수정;최윤성;박종엽;남정수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.51-52
    • /
    • 2023
  • Recently, heat island and dry island phenomena occur frequently due to land surface development and excessive energy consumption in urban areas. As a result, the surface temperature of the building and the entire temperature of its surroundings are increased, and as a result, the durability of the building is rapidly deteriorated. In order to suppress these causes, a method of maintaining the temperature of road heating wires was implemented as a temporary measure, but this did not predict climate change. Therefore, this study is a method to measure the compressive strength, density, and thermal conductivity of light weight concrete using waste glass foam beads. After fabricating a simple chamber, the temperature and humidity of the inside and outside were measured with an Arduino device in consideration of external factors. Therefore, if waste glass foam beads made through proper mixing are constructed in the urban center, the quality of the urban can be improved.

  • PDF

Rare earth coupling agent로 표면개질된 Oyster shell이 친환경 Bio-EPDM 발포체에 미치는 영향 연구 (A Study on the Effect of Oyster Shell Surfase Modified with Rare Earth Coupling Agent on Eco-Friendly Bio-EPDM Foam)

  • 서은호;임성욱;박경순;박은영
    • 한국염색가공학회지
    • /
    • 제33권4호
    • /
    • pp.317-326
    • /
    • 2021
  • In this study, we investigated for Bio-EPDM foam with oyster shell surface modified earth coupling agent. Experiments were carried out to confirm the bio-EPDM/Oyster shell foam applying content of earth coupling agent. The cure characterization were evaluated by measuring the mooney viscosity and oscillating disc rheometer (ODR). Mechanical properties such as hardness, tensile strength, elogation at break and tear strength were measured, and changes of mechanical properties were also evaluated after immersion in NaCl solution. In addition degree of volume change was measured after immersing the Bio-EPDM foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. To evaluate the low-temperature characteristics of Bio-EPDM/Oyster shell, the glass transition temperature was measured using Differential Scanning Calorimeter (DSC). As a result as the content of the earth coupling agent increased up to 3phr, the crosslinking density and mooney viscosity increased, and the mechanical properties and low-temperature permanent compression set improved, but from 4phr, it was rather decreased. The change in the glass transition temperature was insignificant, and the foam cell appeared to be uniform when the earth coupling agent was applied.