• 한국정보처리학회논문지
• /
• 제4권1호
• /
• pp.237-245
• /
• 1997

본 논문에서는 우선순위에 기초를 둔 새로운 흐름제어 방식을 제안한다. 이 방식 에 따르면 각 통신경로는 유지하고자 하는 적정 버퍼의 크기를 설정하고, 전송중 이 를 초과하지 않도록 해당 통신경로의 전송 우선순위를 조절한다. 대용량의 통신대역 폭을 요구하는 통신경로는 작은 크기의 적정 버퍼를 설정한다. 적정 버퍼의 크기와 전송 우선순위가 반비례하게 정의하면, 통신경로의 전송 우선순위는 높게 설정되므 로, 각 노드는 설정된 통신경로를 지나는 패킷에 높은 처리 기회를 제공하게 되고, 이를 통하여 버퍼의 크기를 적정 수준이하로 감소시키는 작용을 한다. 또한 대용량의 통신대역폭을 요구하는 통신경로에서는 경로상에 있는 노드에 적은 수의 패킷을 유지 하게 함으로 짧은 전송지연을 갖게 된다. 각 통신경로의 버퍼 크기는 통신경로가 연 결된 동안 일정한 시간 간격으로 재조정될 수 있다. 사용하고 있는 통신망 대역폭이 통신경로의 최종 목적지 응용 프로그램이 필요로 하는 데이타 흐름보다 적은 경우, 그 노드는 큐의 크기를 줄임으로써 대역폭을 보다 크게 확보할 수 있다. 통신망간 연 동 환경에서는 나은 통신망 대역폭을 근접한 노드로 확보할 수 있으며, 따라서 데이 타의 응답이 전통적인 end-to 흐름제어 기법보다 빨라진다. 고속의 통신망 환경에서 는 제안된 흐름제어 기법이 보다 효율적인 성능을 보인다.

• 한국소음진동공학회논문집
• /
• 제25권7호
• /
• pp.455-461
• /
• 2015

The paper deals with the accuracy comparison between two kinds of ultrasonic paths for flow rate measurement. In the Z-path, two transducers are installed on the opposite sides of each other on a pipe, and the ultrasonic waves generated at one transducer propagate to arrive at the other one only by refraction. In the V-path, two transducers are installed on one side of a pipe, and the ultrasonic waves reflected at the inner wall of the pipe are received. Transit times were confirmed to identify the propagation paths by comparing the theoretically calculated results and measured ones. The flow rate measurements with two kinds of ultrasonic paths appeared very similar. It would be possible to select either of the paths by considering the advantages and disadvantages.

• 경영과학
• /
• 제23권2호
• /
• pp.41-57
• /
• 2006

The purposes of this research are to identify causalities among flow and customer loyalty In Chinese online games, and to identify the factors by which flow are influenced. This research tests the model with Chinese on-line game users and compare this result with Korea and Japanese results which were conducted by Lee's research. These implications are thought to be helpful for Korean online game companies to understand the Chinese online game user and to develop the penetration strategies. The results indicated that significant Path coefficients to flow were the convenience of operator, the provision of information, the reality of design. The results indicated that significant path coefficients to customer loyalty were the involvement of virtual community and flow. The involvement of virtual community to flow was not significant but to customer loyalty was significant. The provision of information was negatively influenced on flow. The result of comparison indicated that the path coefficients were different among nations. Korea online game companies need to develop the indigenized online game and to Provide the information to their Chinese partner correctly and quickly.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.1-16
• /
• 2016

Behaviors of surges appearing near the stall stagnation boundaries in various fashions in systems of a single-stage compressor and flow-path systems were studied analytically and were tried to put to order. Deep surges, which enclose the stall point in the pressure-mass flow plane, tend to have either near-resonant surge frequencies or subharmonic ones. The subharmonic surge is a multiple-loop one containing, for example, in a (1/2) subharmonic one, a deep surge loop and a mild surge loop, the latter of which does not enclose the stall point, staying only within the stalled zone. Both loops have nearly equal time periods, respectively, resulting in a (1/2) subharmonic surge frequency as a whole. The subharmonic surges are found to appear in a narrow zone neighboring the stall stagnation boundary. In other words, they tend to appear in the final stage of the stall stagnation process. It should be emphasized further that the stall stagnation initiates fundamentally at the situation where a volume-modified reduced resonant-surge frequency becomes coincident with that for the stagnation boundary conditions, where the reduced frequency is defined by the acoustical resonance frequency in the flow-path system, the delivery flow-path length and the compressor tip speed, modified by the sectional area ratio and the effect of the stalling pressure ratio. The real surge frequency turns from the resonant frequency to either near-resonant one or subharmonic one, and finally to stagnation condition, for the large-amplitude conditions, caused by the non-linear self-excitation mechanism of the surge.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.17-25
• /
• 2023

The purpose of this study was to propose a design that shows optimal performance by changing the geometry of the internal flow path of the receptacle in order to prevent the decrease in flow rate and differential pressure performance due to the application of the receptacle in the hydrogen charging system. To achieve this, 3D computational fluid dynamics simulation was performed for the receptacle, according to the geometry of the flow path inside the receptacle. The pressure results at the inlet and outlet were measured the same as both of N and H₂ in the experiment, and the flow rate of H₂ was 3.75 times higher than that of N₂. In addition, since the flow performance of the receptacle improved under conditions where the flow path was widened, it was confirmed that reducing the diameter of the poppet and the width of the guide are advantageous for improving performance.

• 한국유체기계학회 논문집
• /
• 제15권4호
• /
• pp.12-18
• /
• 2012

This study was performed to found out the deviations for clamp-on type ultrasonic flowmeter installed in downstream of valves. It was selected three types of two-path flowmeter mainly used for K-water as test. Experiment carried out to confirmed characteristics of deviation depending on the sensor location, straight pipe length and maker for 1-path, 2-path and 4-path combined 2-path flowmeter. It was selected two kinds of valves with 100 % and 50 % opening, butterfly valves and gate valves, for flow disturbance factor. Finally, we suggested number of sensors by maker, straight pipe length and installed location of sensors satisfying the tolerance depending on the experiment results.

• 한국컴퓨터정보학회논문지
• /
• 제21권5호
• /
• pp.73-77
• /
• 2016

This paper deals with the network reliability problem that decides the communication line between main two districts while the k districts were destroyed in military communication network that the n communication lines are connected in m districts. For this problem, there is only in used the mathematical approach as linear programming (LP) software package and has been unknown the polynomial time algorithm. In this paper we suggest the heuristic algorithm with O(n) linear time complexity to solve the optimal solution for this problem. This paper suggests the flow path algorithm (FPA) and level path algorithm (LPA). The FPA is to search the maximum number of distinct paths between two districts. The LPA is to construct the levels and delete the unnecessary nodes and edges. The proposed algorithm can be get the same optimal solution as LP for experimental data.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.65-74
• /
• 2000

A five path ultrasonic and/or magnetic flowmeter were installed after valve. Five path ultrasonic flowmeter were tested to obtain it's performance in a water flow standard system and magnetic flowmeter. It's varied with straight pipe length(nD), install direction and valve position. All the results are summerized. The multi-path flowmeters(MUF) showed up to $\pm0.5{\%}$ at a 2, 4, 8, 15D spacing : the MUF was significantly better than magnetic flowmeter at disturbed flow conditions.

• 한국정보통신학회논문지
• /
• 제10권11호
• /
• pp.2002-2007
• /
• 2006

텔레매틱스 시스템에서의 경로 탐색 기법은 교통흐름의 변화에 따라 최단 운행 시간을 갖는 최적 경로가 변하기 때문에 최단 시간 뿐 만 아니라 도로의 교통 흐름까지 고려해야 한다. 기존의 경로 탐색 기법들은 이러한 교통 흐름의 변화에 능동적으로 대처 할 수 없다. 또한 교통 정보를 이용하는 탐색 기법은 기존의 최단 경로 탐색 기법보다 연산 수행시간이 길다. 이 논문에서는 추정치 계산의 단순화를 통한 최적 경로 탐색 기법을 구현하고 성능을 평가한다. 제안한 기법은 교통흐름에 적응적인 휴리스틱을 위해 고정 그리드를 도입한다. 또한 추정치 계산을 간소화하기 위해 출발지와 목적지 사이의 기울기를 고려하여 실수의 곱셈 연산 대신 단계화 된 정수의 덧셈 연산을 한다. 제안한 알고리즘은 최적 경로 정확도 향상뿐만 아니라 탐색 시간을 줄어듦을 실험으로 입증한다.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.400-410
• /
• 2008

Reduction of structure-borne noise in the compartment of a car is an important task in automotive engineering. Many methods which analyze noise transfer path have been generally used for structure-borne noise. These methods are useful in solving particular problem but do not quantify the effectiveness of vibration isolation for each isolator of a vehicle. To quantify the effectiveness of vibration isolation, the vibrational power flow measurement has been used for a simple isolation system or a laboratory based isolation system. This paper identifies the transfer path of booming noise in a SUV. The powertrain used for test has a in-line 4cylinder engine and 5-shift auto-transmission. This powertrain is transversely supported by four isolators. We calculated the energy flow throughout four isolator by the measurement of power flow and the contribution of energy flow at each isolator.