• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.21-33
• /
• 1997

This dissertation deals with the design and VLSI implementation of the MTP(Multimedia Transport Protocol) protocol for the high speed networks. High throughput, functional diversity and flexible adaptation are key requirements for the future transport protocol. However it is very difficult to satisfy all these requirements simultaneously. Fortunately, the future networks will be very reliable. It means that the future transport protocol will usually perform some fixed functions without the protocol state information. According to this concept, we proposed and designed the MTP protocol that is consisted of Information Plane and Control Plane. Information Plane performs some fixed functions that are independent of the protocol state information as far as no error. However Control Plane manages the protocol state information and controls the operation of Information Plane. Our MTP protocol was finally implemented as an FPGA chip using the VHDL. We built a testbed for verification of the implemented protocol, and it was shown that the MTP protocol worked correctly and made a throughput of about 800 Mbps. Our future works include the addition of multiplexing and multicasting capabilities to our protocol for multimedia applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4A
• /
• pp.200-207
• /
• 2003

This paper proposes a CDMA receiver structure with time-shifted m-sequence orthogonal reception process, and analyzes the output SNR performance and the characteristics of the orthogonal receiver. This structure can be simply implemented with the converntional receiver adding an additional integrator path in parallel and an adder sums the conventional path and the new path output signals. The structure provides to reference user signal not only increment of signal component but also perfect orthogonal characteristic, canceling the accumulated cross-correlated value out to zero between the reference user and other user signals. Hence, the proposed structure can be applied for channel impulse response measurement, and used for multi-user interference signal cancellation and channel capacity increment by flexible structural inter-working operation of the added path, connection or disconnection, to conventional receiver structure.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.101-112
• /
• 2006

It will not be able to guarantee the secure operation for the information and communication systems with only technical security. So, ISMS(Information Security Management System) research and standardization are active going on. Korea published "The national cyber security management regulation" and "The national cyber security manual" in 2005. According to the regulation and manual, the government organ and public institution must accomplish the security management assessment to itself for systematic management of an information security. We studied related standards and security management systems of the Australia and the USA, and analyzed the security management evaluation system in "The national cyber security manual" in efficient security management focus. We presented the improvement direction of national security evaluation system through the research. We propose the additional control, selective control set and improvement of the evaluation process for efficient security management. Proposed system possible composition of suitable to each organ and flexible adaptation of rapidly changed information environment.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.4
• /
• pp.61-70
• /
• 2009

From the mid-1990s, the discussion on alternative schools began in earnest, and with the increasing interests in them, Korean parents' association of alternative education, KPAAE was launched formally in November, 2008. Among the alternative schools in the nation, thirteen urban alternative schools were studied and analyzed. The result indicated that they are being run by individuals and civic organizations with no approval and the facilities and spatial organization of the schools are poor, which is thought to be mainly due to financial reasons as well as the schools' educational goal that puts emphasis on experiences leading to utilize outside local facilities. With this background, the results from the analysis of the facility status and the spatial organization of urban alternative schools led us to understand the followings: First, it showed that per capita average of area of the urban alternative school is approximately 11.995m$^2$, less than 14N, the standard area of institutional schools. Second, depending on the form of facilities, the space of other facilities is shared to make up for insufficient space, and is utilized to a small degree and for multi-purposes. Third, the space reflects the disposition of subject students, and is located in the area with convenient traffic for students' attending the schools conveniently. Fourth, specialized space is run on the basis of educational goals, and the exploring of career and the improving of sociality are pursued through internship programs associated with local facilities. Thus, it is desirable for the minimum per capita area of the urban alternative school to meet 14N, the standard area of the institutional schools in order that the urban alternative school may overcome the spatial limitation and the financial hardship stemming from the practically difficult constructing of new buildings and the small scale operation, and it may make flexible use of the space, and the students may live their lives smoothly. Also, it is thought that for the activating of the urban alternative schools, the plans for utilizing various facilities associated with local facilities should be considered.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.259-266
• /
• 2020

This study analyzes the effects of the obsolescence assets on the asymmetry of costs. Cost asymmetry refers to a lower percentage of costs when sales fall than increases in costs when sales increase. the obsolescence asset induces various decisions, including high maintenance costs and management improvements and replacement of facilities. This study is to analyze the cost behavior according to those decisions. The analysis showed that the higher the obsolescence of assets rate, we found cost elasticity, with a greater reduction in costs when sales decrease than the increase in costs when sales increase. Second, the lower the cost will not appear as the obsolescence of assets rate increases in case that the concentration of an item of property, plant and equipment is high, and when sales decrease. The above result means that the obsolescence of assets rate acts as operating risk and thus operates resources flexibly according to changes in sales, but when the concentration of property, plant and equipment is high, the decision-making constraint make it difficult for the flexible operation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.15-23
• /
• 2009

This paper presents a novel high-speed, low-complexity flexible 128/64-point $radix-2^4$ FFT/IFFT processor for the applications in high-throughput MIMO-OFDM systems. The high radix multi-path delay feed-back (MDF) FFT architecture provides a higher throughput rate and low hardware complexity by using a four-parallel data-path scheme. The proposed processor not only supports the operation of FFT/IFFT in 128-point and 64-point but can also provide a high data processing rate by using a four-parallel data-path scheme. Furthermore, the proposed design has a less hardware complexity compared with traditional 128/64-point FFT/IFFT processors. Our proposed processor has a high throughput rate of up to 560Msample/s at 140MHz while requiring much smaller hardware expenditure satisfying IEEE 802.11n standard requirements.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.468-470
• /
• 2002

We have designed X-ray detection system and multi-channel data acquisition system for Spiral CT application. X-ray detection system consists of scintillator and photodiode. Scintillator converts X-ray into visible light. Photodiode converts visible light into electrical signal. The multi-channel data acquisition system consists of analog, digital, master and backplane board. Analog board detects electrical signal and amplifies signal by 140dB. Digital board consists of MUX(Multiplex) which routes multi-channel analog signal to preamplifier, and ADC(Analog to Digital Converter) which converts analog signal into digital signal. Master board supplies the synchronized clock and transmits the digital data to image reconstructor. Backplane provides electrical power, analog output and clock signal. The system converts the projected X-ray signal over the detector array with large gain, samples the data in each channel sequentially, and the sampled data are transmitted to host computer in a given time frame. To meet the timing limitation, this system is very flexible since it is implemented by FPGA(Field Programmable Gate Array). This system must have a high-speed operation with low noise and high SNR(signal to noise ratio), wide dynamic range to get a high resolution image.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.45-51
• /
• 2008

The objective of this study is to develop an automatic object changer unit to improve processing problems existed in the conventional horizontal machining center. In order to perform this objective, a upward and downward traverse unit in which a unit that consists of a motor and reducer, chain and sprocket wheel, and upper and lower base employed in an automatic object changer unit performs sliding contact motion in a frame was designed. To achieve this design, constraint conditions for the upward and downward traverse unit first designed. Then, an operation mechanism was designed and that was introduced as a sum of kinetic energy for the sprocket wheel and upper and lower base based on the moment of inertia, which is the kinetic energy of the converted upward and downward traverse unit in the side of the reducer. In addition, The work required to rotate the converted upward and downward traverse unit in the side of the reducer by one revolution can be calculated using the sum of work that is required in the sprocket wheel and upper and lower base that is a part of the upward and downward traverse unit. Furthermore, the converted equation of motion in the side of the motor can be introduced using the equation of motion using the converted upward and downward traverse unit in the side of the motor. Then, Then, a proper motor can be determined using predetermined specifications employed in the motor and several parameters in the upward and downward traverse unit in order to verify such predetermined specifications. Also, a design of a horizontal traverse unit that performs sliding motion on a upward and downward traverse unit and simulation that verifies the results of this design are required as a future study.

• Korean Journal of Head & Neck Oncology
• /
• v.12 no.2
• /
• pp.201-205
• /
• 1996

Early detection of glottic cancer, facilitated by rigid telescopes or flexible fiberoptic laryngoscope in addition to sparse true vocal cord lymphatics, makes this a highly curable tumor in its early stage. Early glottic cancer has a high cure rate with only radiotherapy or conservative surgery. However complications such as mucositis with radiotherapy and voice complications with conservative surgery has raised recent interest in endolaryngeal laser cordectomy. Laser cordectomy can preserve phonatory function and avoid the complications such as mucositis of radiotherapy. To determine the effectiveness of laser cordectomy, the authors made a two year retrospective study of 23 early glottic cancer cases. Fourteen cases(60.9%) who underwent 1 to 3 endoscopic laser cordectomy with KTP-532 laser were cured with this procedure alone. Seven cases needed an additional radiotherapy and three cases needed therapy with salvage operation. We conclude that the endoscopic laser surgery is a good strategy for the properly selected glottic cancer.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.75-86
• /
• 2014

PURPOSES: The aim of this paper is developing user-oriented flexible Level Of Service (LOS) system for integrated asset management of various road facilities. It is essential to overcome limitations of general management systems which only focus on a type of assets (e.g. pavement, bridge etc.), and to serve a customizable LOS platform for smooth implementation and future improvement of the LOS considering various managerial environments of road agencies. METHODS: This study suggested a total framework of the LOS system as a process for self-development, operation and improvement of LOS system to conduct the PDCA (Plan-Do-Check-Act) in management process. In the process, we adopted user-customizable elements regarding asset definition, service index and evaluation method to match with the managerial environment of road agencies. In addition, we conducted an empirical study on the entire process of the suggested LOS system with a real road agency (Korea Express Highway) to prove applicability of the LOS system. RESULTS: From the empirical study, we confirmed that the suggested LOS system framework were suitable for development of customized LOS system. In addition, evaluation of asset conditions by LOS ratings, and quantification of vision achievement of the Korea Express Highway were successfully made. It would be the first trial in integrated management approach with LOS systems for numerous road facilities. CONCLUSIONS : It was recognized that easy application and sustainable improvement of the LOS was the most critical point in asset management. The suggested LOS system would be a powerful weapon as a managerial tool in preparing tight budget, aging infrastructures, and increased demands for more accountability both in Korea and internationally. Implementation of the LOS system needs to be expanded to the other infrastructure members to serve satisfactory level of service to taxpayers.