• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.745-752
• /
• 2007

In this study, the effects of flexible bodies in vehicle suspension components were investigated to enhance the accuracy of multibody dynamic simulation results. Front and rear suspension components were investigated. Subframes, a stabilizer bar, a tie rod, a front lower control arm, a front knuckle, and front struts were selected. Reverse engineering techniques were used to construct a virtual vehicle model. Hard points and inertia data of the components were measured with surface scanning equipment. The mechanical characteristics of bushings and dampers were obtained from experiments. Reaction forces calculated from the multibody dynamics simulations were compared with test results at the ball joint of the lower control arm in both time-history and range-pair counting plots. Simulation results showed that the flexibility of the strut component had considerable influence on the lateral reaction force. Among the suspension components, the flexibility of the sub-frame, steering knuckle and upper strut resulted in better correlations with test results while the other flexible bodies could be neglected.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.125-130
• /
• 2015

Using flexible multibody system dynamic method, the rigid-flexible coupling multibody dynamic analysis model of the drum brake system was developed, and the kinematic and dynamic simulation of the system was processed as its object of study. Simulations show that the friction will increase with the dynamic friction coefficient, but high dynamic friction coefficient will cause the abnormal vibration and worsen the stability of the brake system, even the stability of the whole automobile. The modeling of flexible multi-body can effectively analyze and solve complex three-dimensional dynamic subjects of brake system and evaluate brake capability. Further research and study on this basis will result in a convenient and effective solution that can be much helpful to study, design and development of the brake system.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.87-94
• /
• 2001

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve this equation, coordinate partitioning method and constraint stabilization method are commonly used. The coordinate partitioning method divides the coordinate into independent and dependent coordinates. The most typical coordinate partitioning method arc LU decomposition, QR decomposition, projection method and SVD(sigular value decomposition).The objective of this research is to find a efficient coordinate partitioning method in flexible multibody systems and a hybrid decomposition algorithm which employs both LU and projection methods is proposed. The accuracy of the solution algorithm is checked with a slider-crank mechanism.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.166-172
• /
• 1997

In order to find out relationship between hit probability and gun firing of a moving tank, a turret and flexible gun system model has been developed using the recursive flexible multibody dynamics. For a firing simulation model, nodal coordinates for a finite element model of a flexible gun have been employed to include traverse loads to the gun tube due to moving bullet and ballistic pressure. Modal coordinates are also used to represent the motion induced gun vibration before a firing occurs. An efficient switching technique from modal equations to nodal equations has been introduced for an entire gun firing simulation with rotating turret.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2483-2490
• /
• 1993

This paper presents a systematic formulation for the kinematic and dynamic analysis of flexible multibody systems. The system equations of motion are derived in terms of relative and elastic coordinates using velocity transformation technique. The position transformation equations that relate the relative and elastic coordinates to the Cartesian coordinates for the two contiguous flexible bodies are derived. The velocity transformation matrix is derived systematically corresponding to the type of kinematic joints connecting the bodies and system path matrix. This matrix is employed to represent the equations of motion in relative coordinate space. Two examples are taken to test the method developed here.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1213-1220
• /
• 2015

망간단괴를 채집하는 심해저 통합 채광시스템은 채광선, 수직양광관, 중간버퍼, 유연관, 채광로봇으로 구성되어 있다. 최근 심해저 통합 채광시스템 연구에서는 생산성을 극대화하기 위한 다수의 채광로봇으로 구성되는 새로운 다중로봇 통합 채광시스템의 개념이 소개되었다. 본 논문에서는 다중로봇 통합 채광시스템 해석의 효율성을 향상시키고, 다중로봇 시스템의 확장이 이하도록 부분시스템 합성방법이 적되었다. 또한 유연 다물체 동역학이 적된 부분구조로 나눔으로써 수직양광관과 유연관의 대변위가 고려되었다. 일반적인 해석방법과 부분시스템 합성방법의 산술 연산 횟수를 비교함으로써 통합 채광시스템의 부분시스템 합성방법의 이론적인 효율성 연구가 수행되었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.64-71
• /
• 2002

Recently, mechanical systems such as a high-speed vehicles and railway trains moving on flexible beam structures have become a very important issue to consider. Using the general approach proposed in the first part of this paper, it is possible to predict motion of the constrained mechanical system and the elastic structure, with various kinds of foundation supporting conditions. Combined differential-algebraic equation of motion derived from both multibody dynamics theory and finite element method can be analyzed numerically using a generalized coordinate partitioning algorithm. To verify the validity of this approach, results from the simply supported elastic beam subjected to a moving load are compared with the exact solution from a reference. Finally, parametric study is conducted for a moving vehicle model on a simply supported 3-span bridge.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2298-2305
• /
• 1992

본 연구에서는 보의 종방향 강성치를 실제보다 훨씬 작은 횡방향 강성치 수준 으로 낮추어 시간 적분을 수행하는 대신, 종방향에 작용하는 힘을 분산시켜서 계산시 종방향 상대 변형을 억제하는 기법을 사용하였다. 또 여러개의 물체가 조인트에서 서로 연결되어 이루어진 다물체 도역학의 해는 운동 방정식과 기구학적 제한조건을 모 두 만족시켜야 하며, 상미분 방정식 해법용 시간 적분을 바로 적용할 수는 없다. 본 논문에서는 참고문헌(13)과 (14)에 소개된 반복계산법 및 계산가속기법에 의하여 Lag- range multiplier를 운동 방정식에서 소거한 후 시간 적분을 수행하는 방법을 사용한 다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2804-2811
• /
• 2000

A Nordsick form opf the multirate integration scheme has been proposed for flexible multibody dynamic systems. It is assumed that vibrational modal coordinates in the equations of motion are treated as fast variables, whereas the relative joint coordinates are treated as slow variables. In the multirate integration, the fast variables are integrated with small step-size, and the slow variables are integrated with larger step-size. The proposed multirate integration method is based on the Adams-Bashforth-Moulton predictor-corrector method and implemented in the Nordsieck vector form. The Nordsieck form of multrate integration method provides effective step-size control and at the same time, inherits the efficiency from the Adams integration method. Simulations of a flexible gun and turret system of the military tank have been carried out to show the effectiveness and efficiency of the proposed method.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.352-360
• /
• 1997

An inverse dynamic procedure for spatial multibody systems containing flexible bodies is developed in the relative joint coordinate space. Constraint acceleration equations are derived in terms of relative coordinates using the velocity transformation technique. An inverse velocity transformation operator, which transforms the Cartesian velocities to the relative velocities, is derived systematically corresponding to the types of kinematic joints connecting the bodies and the system reference matrix. Using the resulting matrix, the joint reaction forces and moments are analyzed in the Cartesian coordinate space. The formulation is illustrated by means of two numerical examples.