• 전기학회논문지
• /
• 제57권5호
• /
• pp.827-832
• /
• 2008

One of the most important issues in AC PDP is luminance and luminous efficacy. To improve the luminance and luminous efficacy, new sustain electrode structure which contains long discharge gap is necessary. However, it causes a rise of firing voltage. In this experiment, a new structure is proposed in order to solve this problem. To drop the firing voltage, the hump shaped electrode is inserted into the forward area of the main discharge gap. The experimental results show that proposed structures with 160um discharge gap have high firing voltage by 38V, high luminance by 30% and high luminous efficacy by 15% compared with conventional type having 60um discharge gap. In addition, the proposed structure with hump electrode shows lower firing voltage by 24V compared with the test panel with 160um discharge gap which doesn't have hump electrode though they have similar luminous efficacy.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1422-1428
• /
• 2008

In the current PDP technology, one of the most important issues in AC PDP is improvement of luminance and luminous efficacy. To improve luminance and luminous efficacy, new cell structure of PDP containing long discharge path is necessary. However, it causes an increment of firing voltage. In order to decrease firing voltage of AC PDP having long discharge gap, the protrusion electrode is proposed. To drop the firing voltage, the protrusion electrode is inserted into the forward area of the main discharge gap. This paper presents measurements of detailed optical and electrical characteristics of AC PDP with protrusion electrodes. The experimental results show that the proposed structure with gap 80um has lower firing voltage to 27V than that of the conventional long gap structure. Moreover, the ICCD(Intensified Charge Coupled Device) images of the proposed structure show quick discharge generation by 0.07usec and longer continuation by 0.05usec than that of the conventional long gap structure. Therefore, the proposed protrusion electrodes have higher luminance by 12.5% than that of the conventional structure, as having no decrement of Luminous efficacy.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.417-424
• /
• 2019

Purpose: In this study, the goal is to analyze this case to prevent the same accidents when using one-shot rifle. Methods: Detailed analysis of damaged parts must first be made in order to determine the cause of the abnormal explosion. The cause of abnormal operation can be determined by analyzing the information of damaged components and the firing mechanism of the weapon step by step. Also we can refer to a statement of shooter, witness and accident scene situation. Based on this theory, cause of abnormal firing can be narrow down. Results: Fracture of pin for fixing firing and latch is cause of abnormal operation of firing. Conclusion: It is deemed that periodic inspection and fundamental improvement of the structure are required to prevent the same accident as this.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.79-86
• /
• 2018

Many countries have conducted extensive studies for biomass co-firing to enhance the durability of reactor on high-temperature corrosion. However, due to the complicated mechanisms of biomass co-firing, there have been limitations in accurately determining the current state of corrosion and predicting the potential risk of corrosion of power plant. In order to solve this issue, this study introduced Lab-scale corrosion system to analyze the corrosion characteristics of the A213 T91 material under the biomass co-firing conditions. The corrosion status of the samples was characterized using SEM/EDS analysis and mass loss measurement according to various biomass co-firing conditions such as corrosion temperature, $SO_2$ concentration, and corrosion time. As a result, the corrosion severity of A213 T91 material was gradually increased with the increase of $SO_2$ concentration in the reactor. When $SO_2$ concentration was changed from 0 ppm to 500 ppm, both corrosion severity and oxide layer thickness were proportionally increased by 15% and 130%, respectively. The minimum corrosion was observed when the corrosion temperature was $450^{\circ}C$. As the temperature was increased up to $650^{\circ}C$, the faster corrosion behavior of A213 T91 was observed. A213 T91 was observed to be more severely corroded by the effect of chlorine, resulting in faster corrosion rate and thicker oxide layer. Interestingly, corrosion resistance of A213 T91 tended to gradually decrease rather than increases as the oxide layer was formed. The results of this study is expected to provide necessary research data on boiler corrosion in biomass co-firing power plants.

• 한국국방경영분석학회지
• /
• 제7권1호
• /
• pp.81-117
• /
• 1981

Mathematical models for hit probabilities of small arms are developed in order to estimate the expected hits on an aircraft for certain altitudes and air speeds. A model for the firing lead angle is developed for cases when the distribution of hits is normal and the firing angle is from 20 degrees to 160 degrees. probabilities of hit for single and multiple shots at various altitudes are calculated. Tables are given showing the probability of hits and kill for targets flying at high speed above 500 feet from ground level.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.67-72
• /
• 1989

In order to define the composition range of bone china body with use of calcium phosphate, kaolin, quartz and feldspar as raw materials, we varied calcium phosphate from 40 to 55wt/o and selected basic composition by the change of raw materials in ternary system. After these bodies were fired at 120$0^{\circ}C$, 123$0^{\circ}C$, 125$0^{\circ}C$ and 128$0^{\circ}C$ their properties were closely tested to determine the compositions and firing conditions of bone china body.

• 한국세라믹학회지
• /
• 제19권1호
• /
• pp.5-12
• /
• 1982

SiC-containing by-product from the surface abrasion process of porcelain cores is used as a starting material to develop the SiC-containing technical porcelain bodies. To prevent the bloating phenomenon of by-product specimen at firing temperature, it is acid treated. In order to enhance the workability and to lower the firing temperature of bodies, clay is added. Body containing 25% clay and 75% by-product fired at 135$0^{\circ}C$ showes extremely high thermal shock resistance and acid resistance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.639-642
• /
• 1988

In this paper, the problem of regulation in the presence of a known firing disturbance is considered. We show how one can apply a disturbance-utilizing control(DUC) theory to a actual gun servo model. Applied disturbance-utilizing control theory is established by combining LQ regulator and reduced order observer in the discrete time domain. To see the performance of the applied method, computer simulation results are given.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.611-615
• /
• 2015

비행기 방어용 대공포는 저고도 방어체계로 사용되고 있으며, 방어능력 극대화를 위해 대부분 고발사율 대공포를 두개 이상 탑재하여 교전 시 명중률을 높이고 있다. 고 발사율 대공포의 경우, 포열진동 및 탄의 불균형 분산은 정확한 조준사격 및 명중률에 아주 결정적인 영향을 미치게 된다. 따라서 사격 진동 및 충격량을 감소하는 구조는 대공포 체계에서는 주요 설계 대상이다. 본 연구에서는 차량의 현가장치 특성에 따라 고발사율 대공포 체계에서 발사시스템의 진동충격으로부터 차단하는 능력을 향상시키고, Recurdyn 과 Adams 를 이용한 동적 거동해석과 실 사격 시험결과를 비교하여 명중률에 영향을 미치는 현가 형태, 위치 및 수량에 따른 체계 자세 흔들림을 예측하였다. 본 연구를 통하여 대공포에 적합한 현가장치와 포 스프링 등과 같은 구성품을 선정할 수 있는 기초연구를 수행하였다.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.278-284
• /
• 2009

본 논문에서는 직류 전력을 공급하기 위한 사이리스터 컨버터의 출력 응답특성을 개선하기 위해 데이터 병렬 루프를 가지는 PID 제어 방식을 제안한다. 제안된 방식에서 사이리스터 컨버터의 점호각은 부하전류와 지령전압에 따라 결정된 점호각을 제어기와 병렬로 연결된 데이터 루프에서 발생하고, 이 점호각에 의해 발생하는 출력전압의 오차를 PID 제어기에서 보상하여 제어하는 방식이다. 제안된 방식의 실제적인 적용에서, 부하전류에 의해 병렬 데이터 루프의 점호각이 급격하게 변동하는 것을 억제하기 위해 간단한 디지털 저역통과 필터를 통하여 부하전류와 지령전압의 크기에 따라 룩-업 테이블 방식의 점호각이 결정되도록 설계하였다. 제안된 방식은 50[A]급의 사이리스터컨버터 실험을 통하여 검증하였다.