• Advances in materials Research
• /
• 제5권4호
• /
• pp.205-221
• /
• 2016

In this article, the buckling responses of functionally graded curved (spherical, cylindrical, hyperbolic and elliptical) shell panels under elevated temperature load are investigated numerically using finite element steps. The effective material properties of the functionally graded shell panel are evaluated using Voigt's micromechanical model through the power-law distribution with and without temperature dependent properties. The mathematical model is developed using the higher-order shear deformation theory in conjunction with Green-Lagrange type nonlinear strain to consider large geometrical distortion under thermal load. The efficacy of the proposed model has been checked and the effects of various geometrical and material parameters on the buckling load are analysed in details.

• 대한조선학회지
• /
• 제21권2호
• /
• pp.19-27
• /
• 1984

An extension of the finite element method to the stability analysis of shells of revolution under static axisymmetric loading is presented in this paper. A systematic procedure for the formulation of the problem is based upon the principle of virtual work. This procedure results in an eigenvalue problem. For solution, the shell of revolution is discretized into a series of conical frusta. The buckling mode in the circumferential direction is assumed, this assumption makes the problem economical for the computing time. The present method is applied to a number of shells of revolution, under axial compression or lateral pressure, and comparision are made with other theoretical results. The results show good agreement each other. The effects of aspect ratio, boundary conditions and buckling modes on the buckling strength of shells of revolution are studied. Also the optimum shape of cylindrical shell under uniform axial compression is obtained from the view point of structural stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.702-710
• /
• 1999

U-shaped bellows are usually used to piping system pressure sensor and controller for refriger-ator. Bellows subjected to internal pressure are designed for the purpose of absorbing deformation. Internal pressure on the convolution sidewall and end collar will be applied to an axial load tend-ing to push the collar away from the convolutions. To find out deformation behavior of bellow sub-jected to internal pressure the axisymmetric shell theory using the finite element method is adopted in this paper. U-shaped bellows can be idealized by series of conical frustum-shaped ele-ments because it is axisymmetric shell structure. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displace-ments are added to r-z cylindrical coordinates of nodal points. The new stiffness matrix of the sys-tem using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacement that is the step by step method is used in this paper. The force required to deflect bellows axially is a function of the dimensions of the bellows and the materials from which they are made. Spring constant is analyzed according to the changing geometric factors of U-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM the internal pressure vs. deflection characteristics of a particu-lar bellows can be predicted by input of a few factors.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2245-2252
• /
• 2002

Design sensitivity analysis scheme is proposed in an elasto -plastic finite element method with explicit time integration using a direct differentiation method. The direct differentiation is concerned with large deformation, the elasto-plastic constitutive relation, shell elements with reduced integration and the contact scheme. The design sensitivities with respect to the process parameter are calculated with the direct analytical differentiation of the governing equation. The sensitivity results obtained from the present theory are compared with that obtained by the finite difference method in a class of sheet metal forming problems such as hemi-spherical stretching and cylindrical cup deep-drawing. The result shows good agreement with the finite difference method and demonstrates that the preposed sensitivity calculation scheme is a pplicable in the complicated sheet metal forming analysis and design.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.28-31
• /
• 1998

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of the wrinkles are influenced by many factors such as stress state, mechanical properites of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation for small deviation of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth, All the above mentioned factors are conveniently considered by finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. The finite element analysis is carried out using the continuum-based resultant shell elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing to column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2263-2271
• /
• 2015

압축력을 받는 얇은 원통형 쉘 구조물은 좌굴에 대한 안정성을 검토해야 한다. 좌굴에 대한 검토 시, 좌굴강도에 민감한 영향을 미치는 초기결함에 대한 중요성은 많은 선행연구에서 언급하였으나 다양한 초기결함의 영향성을 반영 할 수 있는 좌굴강도 연구가 필요하다. Eurocode에서 제시하고 있는 초기결함의 영향성을 반영하는 설계 계수 ${\alpha}$의 경우도 단면의 두께로 결정되는 특정 초기결함만을 포함하고 있어 다양한 초기결함에 대한 좌굴강도를 예측하기 어렵다. 본 논문에서는 초기결함의 영향성을 보기 위해 초기결함의 크기를 변화시켜가며 휨을 받고 있는 원통형 단면의 좌굴강도를 기하 재료비선형 해석을 통해 얻어내었다. FEM해석을 통하여 다양한 초기결함을 반영할 수 있는 수정된 ${\alpha}^{\prime}$을 제안하여 보다 합리적인 원통형 휨 좌굴강도를 계산할 수 있는 방법을 제시하였다.

• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.373-384
• /
• 1999

복합재료를 사용한 비등방성 원통형 쉘 구조형식은 단일소재의 재료역학적인 단점을 극복할 수 있다. 본 연구의 목적은 1차전단변형효과가 고려된 비등방성 원통형 쉘을 해석하는 것이다. 전단변형효과가 고려된 원통형 쉘의 거동은 기존의 고전적인 해와 길이-두께비에 따라 상당한 거동의 차이를 보이므로 이러한 전단변형효과의 고찰은 매우 중요하다고 사료된다. 또한 본 연구는 유한요소법에 근간한 상용 공학프로그램인 ANSYS와 본 연구의 프로그램결과를 비교, 검증하였으며, 비등방성 원통형 쉘의 중심각의 변화, 화이버의 보강각도 변화, 탄성계수비의 변화 등에 따른 쉘의 처짐 및 단면력을 분석하였다. 본 논문에서 사용한 유한차분법에 의한 해는 기존의 해석적인 방법으로는 해석하기 어려운 보다 다양하고 복잡한 조건을 갖는 문제에 대하여 보다 정확한 해를 얻을 수 있다. 따라서 본 논문에서 제시한 유한차분법을 이용한 다양한 비등방성 원통형 쉘의 해석결과는 복합 신소재를 사용하는 쉘 구조체의 실용화에 앞서 다양한 기준을 제시할 수 있을 것으로 판단된다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.212-213
• /
• 2005

The results of an experimental and analytical study of composite pressure hull on buckling pressure are presented for URN 300. We predicted the buckling and post buckling analysis of composite laminated cylindrical shell and panel under external compression by using ABAQUS/Standard[Ver 6.4]. To obtain nonlinear static equilibrium solutions for unstable problems, where the load-displacement response can exhibit the type of nonlinear buckling behavior, during periods of the response, the load and/or the displacement may decrease as the solution evolves, used the modified Riks method. Experiments were conducted to verify the validation of present analysis for cross-ply laminated shells. The shells considered in the study have four different lamination patterns, [${\pm}{\Theta}$/0/90]$_{14s}$,[${\pm}{\Theta}_{14}$/$0_{14}$/$90_{14}$],[${\pm}$45/0/90]$_{18s}$ and [/0/90]$_{18s}$. At the result of this study, the optimized ply orientation angle is $75^{\circ}$. The critical load from experiment is 69% of that of numerical analysis, because the fracture of matrix was generated before buckling. So URN 300 is not proper to use at the condition under high external pressure.

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.193-201
• /
• 2004

본 연구의 목적은 축대칭 하중을 받는 원통형 펄의 엄밀해를 구하는데 있어서, 간략하면서도 엄밀한 해를 구하는 방법을 제시하고자 하는데 있다. 이는 임의 형상의 구조해석을 위한 강력한 도구이긴 하지만 여전히 근사해석인 유한요소법에 대체될 수 있을 것이다. 이를 위해 본 논문은 반복법의 일종인 인도행렬법을 이용한 절점역계의 분배방식을 사용하였다. 원통형 쉘의 분배와 전달인자는 한성지반상의 보에 대한 미분방정식으로부터 구해진 것이다. 이러한 방법을 축대칭 집중하중과 정수압을 받는 원통형 쉘에 각각 적용해 보았고, 그 결과는 BEF 이론해와 비교할 때 만족할 만 하였다.

• Steel and Composite Structures
• /
• 제20권1호
• /
• pp.147-166
• /
• 2016

The paper presents comprehensive quasi-static stability analysis results for a real funnel-flow cylindrical steel silo composed of horizontally corrugated sheets strengthened by vertical thin-walled column profiles. Linear buckling and non-linear analyses with geometric and material non-linearity were carried out with a perfect and an imperfect silo by taking into account axisymmetric and non-axisymmetric loads imposed by a bulk solid following Eurocode 1. Finite element simulations were carried out with 3 different numerical models (single column on the elastic foundation, 3D silo model with the equivalent orthotropic shell and full 3D silo model with shell elements). Initial imperfections in the form of a first eigen-mode for different wall loads and from 'in-situ' measurements with horizontal different amplitudes were taken into account. The results were compared with Eurocode 3. Some recommendations for the silo dimensioning were elaborated.