• Smart Media Journal
• /
• v.13 no.3
• /
• pp.62-73
• /
• 2024

This research, conducted over a three-year period starting from 2020, was a collaborative project between practitioners in the field of VE design and the Korea Expressway Corporation, aimed at innovating the design VE project to construct an intelligent ICT-based smart highway and enhancing highway driving performance and customer satisfaction. The research included R&D support for payment and management systems integrated with IOT technology, the application of the developed prototype at highway sites, and analysis of user performance evaluation. Based on the Innovation Work Roadmap of the Korea Expressway Corporation, the research process involved collaboration between a public participation group and an expert group, considering the technical feasibility of data-based ICT technology through the National Idea VE Contest. The final VE design results were implemented at the Seongnam tollgate site with budget support from relevant departments, followed by a satisfaction survey. It is expected that the continuous contributions to achieving an ESG society, such as the increase in the number of customers using the tolling zone equipped with smart upgrades, along with their satisfaction rate, and the reduction in carbon emissions and total settlement time of highway users, will be sustained.

• Steel and Composite Structures
• /
• v.50 no.2
• /
• pp.159-181
• /
• 2024

In the present study, the effect of geometrical parameters of two different types of aluminum thin-walled structures on energy absorption under three-bending impact loading has been investigated experimentally and numerically. To evaluate the effect of parameters on the specific energy absorption (SEA), initial peak crushing force (IPCF), and the maximum crushing distance (δ), a design of experiment technique (DOE) with response surface method (RSM) was applied. Four different thin-walled structures have been tested under the low-velocity impact, and then they have simulated by ABAQUS software. An acceptable consistency between the numerical and experimental results was obtained. In this study, statistical analysis has been performed on various parameters of three different types of tubes. In the first and the second statistical analysis, the dimensional parameters of the cross-section, the number of holes, and the dimensional parameter of holes were considered as the design variables. The diameter reduction rate and the number of sections with different diameters are related to the third statistical analysis. All design points of the statistical method have been simulated by the finite element package, ABAQUS/Explicit. The final result shows that the height and thickness of tubes were more effective than other geometrical parameters, and despite the fact that the deformations of the cylindrical tubes were around forty percent greater than the rectangular tubes, the top desirability was relevant to the cylindrical tubes with reduced cross-sections.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.52-57
• /
• 2018

With the recent strengthening of environmental regulations and the need for cost reduction, excavators, a type of construction equipment, are being miniaturized while components are being developed in consideration of stability. In the case of excavator press parts, mainly high-strength steel sheets are being used to enhance stability and reduce weight. However, in the case of high-strength materials, there is a need to research product forming methods to reduce Springback in defects arising in parts assembly due to Springback that result from the internal residual stress that occurs in press forming being released after product forming. Accordingly, regarding the tank cover, an excavator press-forming part, this study selected a method to reduce distortion through analysis of the Springback occurrence rate and Springback causes through a forming analysis. A forming analysis was conducted for the Springback of the tank cover. Deformations of 13.714 mm in the upper part and 6.244 mm in the inner part of the product occurred, while wrinkles occurred on the sides of the product due to uneven thickness. A forming analysis was conducted for the major shapes of the product to investigate the causes of Springback. Distortion deformation due to the bead in the center of the product was confirmed to be a large factor. A Springback reduction method of correcting uneven thickness in the product sides, a Springback reduction method of removing the bead, and a correction method of restriking after the final forming were used in a forming analysis to determine the degree of Springback reduction. For the forming method to correct uneven thickness in the sides, deformation was reduced by 12% in the upper side compared to the existing model, but deformation in the inner side increased by 1%. For the restriking forming method, deformation decreased by 25% in the upper side and 13% in the inner side. For the bead removal method, deformation decreased by 28% in the upper side and 13% in the inner side, the largest Springback correction results. This indicates that the bead has a large affect on Springback.

• Health Policy and Management
• /
• v.24 no.2
• /
• pp.120-127
• /
• 2014

Background: Since December 2010, online computerized prospective drug utilization review (pDUR) has been implemented in Korea. pDUR involves the review of each prescription before the medication is dispensed to the individual patient. The pDUR is performed electronically by Health Insurance Review & Assessment Service (HIRA), which is a Korean governmental agency, and then HIRA provides medical institutions and pharmacies with information that can be helpful to them in preventing potential drug problems such as drug/drug interactions or ingredient duplication. The aim of this study was to assess the impact of the Korean pDUR implementation on the proportion of drug-drug interactions (DDIs) using claims data from HIRA. Methods: A before-after comparison of the prevalence of DDIs between prescription was conducted, using HIRA administrative claims data of medical institution from January 2010 to December 2011. The analysis unit was the prescription issued and pairs before and after. The main outcome measures were the proportion of DDIs within- (control group) or between- physician encounters. To examine the difference, a paired t-test was applied. Results: We found that DDIs proportion between prescription decreased significantly (t=3.04, p=0.0026) after the implementation of pDUR, whereas there is no significant reduction within prescription (t=1.15, p=0.2518). With respect to the prevalence of DDIs between drug groups, the most dramatic reduction was occurred between 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitors and anti-fungal agents. Conclusion: It seems effective that giving a direct feedback to prescribers by a prospective DUR. Further research is needed to assess the impact of DUR to final outcomes such as hospitalization.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1314-1321
• /
• 2006

The objective of this work was to study the effect of mixed culture solid substrate fermentation of C. tropicalis ZD-3 with A. niger ZD-8 on detoxification of cottonseed meal (CSM), and to investigate the effect of fermentation period, proportion of CSM in substrate, sodium carbonate, minerals and heat treatment on the reduction of free gossypol levels during mixed culture solid substrate fermentation of CSM. Experiment 1: Three groups of disinfected CSM substrate were incubated for 48 h after inoculation with either of the fungi C. tropicalis ZD-3, A. niger ZD-8 or mixed culture (C. tropicalis ZD-3 with A. niger ZD-8). One non-inoculated group was used as the control. Levels of initial and final free gossypol (FG), CP and in vitro CP digestibility were assayed. The results indicated that mixed culture fermentation was far more effective than single strain fermentation, which not only had higher detoxification rate, but also had higher CP content and in vitro digestibility. Experiment 2: CSM substrates were treated according to experimental variables including fermentation period, proportion of CSM in substrate, sodium carbonate, minerals and heat treatment, Then, the treated CSM substrates were inoculated with mixed culture (C. tropicalis ZD-3 with A. niger ZD-8) and incubated at $30^{\circ}C$ for 36 h in a 95% relative humidity chamber. After fermentation ended, FG and CP content of fermented CSM substrate was assayed. The results showed that the appropriate fermentation period was 36 h, and the optimal proportion of CSM in substrate was 70%. Addition of sodium carbonate to CSM substrate was beneficial for fermentative detoxification. Heat treatment could facilitate fermentative detoxification, and supplementation with minerals was instrumental in reducing gossypol levels during mixed culture solid substrate fermentation of CSM.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.784-790
• /
• 2003

Present investigation shows the analysis results for ceramic reinforced metal matrix composite under uniaxial transverse tensile loading. The resulting deformation, the projected damage type, and stress-strain behavior were computed depending on microstructure details such as the type of periodic reinforcement array, and the type of interface bonding. A two-dimensional finite element analysis was conducted based on the unit-cell of square, hexagonal, or diagonal periodic away For composite with strong interface bonding, the transverse stress vs. strain curve was generally increased with the increase of the ceramic volume fraction. For the composite with weakly bonded interface, however, the transverse stress vs. strain curve was reduced against the ceramic volume fraction. The decrease was caused by the interface debonding-induced stiffness reduction of the composite. For the composite of weakly bonded interface, the relative reduction rate in the final limit stress for hexagonal array was larger than that for square array. Outcome of the present study was compared favorably with the published literature data.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.39-48
• /
• 1998

Growth performance and excretions of nitrogen (N) and phosphorus (P) were investigated with carp (Cyprinus carpio) with carp (Cyprinus carpio) grower fed a low pollution diets (A and B) and commercial ones (Com-1 and Com-2). A recirculated rearing system (Exp. I) and a floating net cage system (Exp. II) were employed for two feeding trials in which fish having an initial body weight of 152g and 193g were fed for 41 an 39 days, respectively. The highest weight gain, daily growth rate and protein efficiency ratio were found (P<0.05) in fish fed diet A containing 10% fish meal and 2% monocalcium phosphate (MCP) for both experiments. They also showed the lowest feed conversion ratio and daily feeding ration among treatments. Fish fed diet B containing 10% fish meal, 5% fish protein concentrate and 1% MCP showed weight gain and FCR more improved (P<0.05) than those fed commercial diets. In all groups, whole body cmpositions were not greatly different among treatment, and protein and P contents in final fish ranged from 14.3 to 15.6% and from 0.39 to 0.48%, respectively. Fish fed diet A excreted the least N which were 38.3 in Exp. I and 39.6g/kg gain in Exp. II. However, the values found in fish fed two commercial diets amounted to 59.1 and 58.9g, respectively. A significant decrease in P excretion was also found in fish groups fed diets A and B. In Exp. I, a reduction of 53.4% was shown in fish fed diet A, compared to the averaged value (18.5g P/kg gain) of two commercial groups. In Exp. II conducted using the floating net cages, fish fed diet B excreted the least P (8.6g/kg gain) among the treatment, which was followed by fish fed diet A, showing 48.6% reduction compared to the average value (18.5g/kg gain) for fish fed two commercial diets. The present results clearly showed that N and P excretions from fish culture could be significantly reduced by using the low pollution diet.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.39-46
• /
• 1985

Heading time was hastened by the combination of seeding time and longday treatment in order to elucidate the effect of early heading on earliness in maturity, vegetative growth and grain yield in five barley varieties and four wheat varieties under field conditions in Suwon, Korea, 1978-79. About 15 days of earliness in heading accelerated only 2 to 6 days in maturity. Furthermore, the duration of grain fill was not much prolonged comparing with the extension of days from heading to maturity, because of the extension of periods from heading to anthesis at lower temperature resulting in somewhat greater final grain weight. Periods from heading to anthesis and from anthesis to maturity were negatively correlated with the air temperature. In early heading, leaf area at 10 days after anthesis and net assimilation rate were much limited, and although leaf area duration got larger, presumably, it could not make up for the reduction of grain yield. Grain yield per plant reduced noticeably in early heading. This was mainly caused by the reduction of spike number and grain number per spike.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.102-109
• /
• 2014

Intra prediction in HEVC is also significantly improved from H.264/AVC with the increased prediction modes up to 35 that results in increase of the complexity cost. Hence, a fast intra mode decision algorithm is required for real-time applications. A fast intra mode decision is proposed in this paper for further complexity reduction in addition to the RMD (Rough Mode Decision) that has been adopted into the HEVC reference software, referred to as HM, for fast intra prediction. The proposed method reduces the complexity of intra mode decision by limiting the number of search modes in both steps of RMD and the final mode decision. Experimental results show that the proposed method provide about 13.2% encoding time reduction with 1.0% BD-rate increase on average over test sequences in HM 12.0.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.247-254
• /
• 2012

Vitrification technology has been widely applied as one of effective processing methods for wastes generated in nuclear power plants. The advantage of vitrifying for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. Recently, a filter using on HVAC(Heating Ventilating & Air Conditioning System) is composed with media (glass fiber) and separator (aluminum film) has been studied the proper treatment technology for meeting the waste disposal requirement. Present paper is a feasibility study for the filter vitrification that developing of the glass compositions for filter melting and melting test for physicochemical characteristic evaluation. The aluminum metal of film type is preparing with 0.5 cm size for proper mixing with glass frit, glass fiber is also preparing with 1 cm size within crucible. The glass compositions should be developed considering molten glass are related with wastes reduction. Glass compositions obtained from developing on glass formulation are mainly composed of $SiO_2$ and $B_2O_3$ for aluminum metal. A variety of factors obtained from the glass formulation and melting test are reviewed, which is feeding rate and glass characteristics of final products such as durability for implementing the wastes disposal requirement.