• Plant Resources
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2005

This study was conducted to produce effectively more leaves of Angelica acutiloba through year-round production system by using various mulching materials. Soil temperature by covering treatment was the highest in P.E.(Polyethylene Film) mulching and followed by rice straw mulching, especially showing highest temperature in Tr. PE(Transparent Polyethylene Film) from April through May. Water content of soil was higher in P.E. mulching than in non-mulching. Leaf and stem production of Angelica acutiloba through year-round production showed the highest in PE mulching also root production of Angelica acutiloba showed the highest in P.E. mulching. These results suggest that leaf and stem production of Angelica acutiloba can be maximized through P.E. mulching cultivation system.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.4
• /
• pp.164-168
• /
• 2005

Effects of high-temperature slurry were investigated on the chemical mechanical polishing (CMP) performance of tetra-ethyl ortho-silicate (TEOS) film with silica and ceria slurries by the surface analysis of X-ray photoelectron spectroscopy (XPS). The pH showed a slight tendency to decrease with increasing slurry temperature, which means that the hydroxyl $(OH^-)$ groups increased in slurry as the slurry temperature increased and then they diffused into the TEOS film. The surface of TEOS film became hydro-carbonated by the diffused hydroxyl groups. The hydro-carbonated surface of TEOS film could be removed more easily. Consequently, the removal rate of TEOS film improved dramatically with increasing slurry temperature.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1456-1462
• /
• 2008

This study conducted a direct shear test to evaluate friction properties on contact surface of waste resources including turban shell, gastropod shell and PET bottle film. The contact surface that was considered for computation of shear strength in contact surface were turban shell/turban shell, gastropod shell/gastropod shell, and PET bottle film/PET bottle film. As a result of test, friction angle was found to be $16.7^{\circ}$ for contact surface of turban shell/turban shell, $35.4^{\circ}$ for gastropod shell/gastropod shell, and about $11^{\circ}$ for PET bottle film/PET bottle film. Using the results, the author aims to provide a possibility for application of waste resource in the field.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.10b
• /
• pp.65-68
• /
• 2000

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.52-52
• /
• 2022

Recently, PE (polyethylene) film has been used increasingly in com cultivation. However, PE films often cause soil and environment contamination. In order to reduce this problem, many researches have been carrying out studies on biodegradable films (BF) that are easily decomposed by soil microorganisms. Therefore, this study was conducted to determine which BF is optimal for growth and yield of com crops while also having the highest rates of film decomposition. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung) as well as a selected PE film were used in this study. For the control, we used crops grown without any kind of mulching. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered by either BF or PE. After 1 week, com (cv. MIBECK2ho) at the 3-leaf stage (16 days after seeding) was transplanted. Plant height was measured at 18 and 32 days after transplanting and heading stages. Yield components and yield were also measured at harvest. In addition, pH, EC, and decomposition and light transmittance levels of films were investigated during the experimental period. Daily average temperature, relative humidity and organic matter in soils were also measured during the experimental period. There was no significant difference in plant height, heading date, and silking between crops with BFs and PE, but the crops grown with BFs and PE films reached higher growth parameters in a shorter amount of time than the crops in the non-mulching control. Additionally, there were no significant differences in yield components such as length of ears, ear width, ear weight, and yield in crops that were grown using films or crops in the control plot. Light transmittance and decomposition levels of films generally increased with time after transplanting, and was highest in the Heulgro film than other BFs. Soil pH and organic matter in crops using BFs and PE films were significantly higher than in the control plot at 99 and 113 days after transplanting. In general, the EC contents in the control plot was lower than in crops using BFs and PE films. The average daily moisture in soil was higher when BFs and PE films were used than in the control plot. However, the daily average soil temperature was higher in crops using BFs and PE films than in the control plots at the beginning of the experimental period, but there was no consistent difference in soil temperature towards the later part of the experimental period. Therefore, the BFs used in this study were shown to be helpful without causing negative impacts on the growth and yield of com.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.79-84
• /
• 2005

The lowest activation temperature of a commercial vacuum getter reported so far in literature was about $400^{\circ}C$. Recently, $Ti_{0.3}Zr_{0.2}V_{0.5}$ alloy has been reported to exhibit the activation temperature lower than $200^{\circ}C$ when they are prepared as thin film. In this study, the alloy was prepared as bulk form and its activation temperature and hydrogen sorption properties were investigated in compliance with a standard method. The alloy powder was prepared by arc melting and subsequent HDH(Hydride-DeHydride) process. The activation temperature of the alloy was estimated from the ultimate pressure-temperature curve and located between $150^{\circ}C\;and\;200^{\circ}C$. The hydrogen sorption speed measured by an orifice method was 0.895 liter/sec which is comparable to thin film of same composition.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.166-173
• /
• 2016

This study aimed to evaluate the commercialized packaging status of tomato and paprika, and to investigate the effect of different packaging materials on the quality of tomato and paprika during storage. Packaging statuses were surveyed at a department store, wholesale market, and supermarket in Seoul, Korea. Materials used for packaging tomato and paprika were cartons, polypropylene (PP), low-density polyethylene (LDPE), polystyrene (PS), and polyvinyl chloride (PVC). Tomato and paprika were packaged by using corrugated boxes, Styrofoam trays, PP film, and PVC film. The weight loss and hardness of non-packaged tomato and paprika were significantly different after 48 hr to the initial values (p<0.05). Box-packaged tomatoes had the lowest pH values and showed significantly higher soluble solid contents (p<0.05). However, there were no significant differences in among other packaging materials. For paprika, the ${\Delta}E$ values of PVC wrapping were higher than those of other packagings. Hence, the results demonstrated that a corrugated box with PP film and PP film bags with four holes plus wire-tying were most able to maintain the overall qualities of tomato and paprika, respectively, during storage.

• Journal of Information Technology Applications and Management
• /
• v.31 no.3
• /
• pp.181-192
• /
• 2024

With the introduction of generative artificial intelligence(AI) tools such as OpenAI's Sora into the global film industry, including Hollywood, there has been a simultaneous emergence of innovations in film production as well as various crises. These changes are spreading throughout the entire film production process, including scriptwriting, casting, editing, and acting. This study analyzes the impact of AI on the film industry, particularly Hollywood, and explores how this technology might bring about changes in Korean cinema. AI technologies applied in the film industry offer benefits such as reducing production time and costs. However, they also pose threats to many filmmakers and actors who rely on the traditional production methods, leading to ethical and legal issues. In Hollywood blockbuster films, AI technology is used to create realistic visual effects, analyze scripts, and suggest optimal shooting angles. While these applications improve the qualitative level of films, they also reduce the human resources required in traditional film production processes. The impact on the Korean film industry is also noteworthy. Some Korean film production companies are leveraging AI to create films in a more creative and efficient manner. Efforts are being made to analyze audience data using AI and develop storylines that appeal to a larger audience. However, these technological changes are controversial among many Korean filmmakers who prefer traditional production methods. This study provides an in-depth discussion on whether the adoption of AI in the film industry can bring about positive innovation or inevitably lead to crises. It analyzes how AI technology is transforming traditional roles in the film industry and what new opportunities and challenges this change generates within the industry. Additionally. This study highlights the differences in technology adoption between Hollywood and Korean film industry and explores how each industry is embracing these technological changes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.51-57
• /
• 2013

Leak detection, the system is controlled by humanity's precious water resources, prepare for natural disasters and prevent damage to buildings and various industrial facilities. Especially because it causes serious environmental pollution, chemicals or oil spills, leak detection of various liquid(oil, water), the point at which the liquid leak is detected early on, and minimize environmental pollution, prevent damage of the equipment due to the leak, and the country's precious water resources to be used safely. In this paper, we solve these problems by using specialized film sensor, any person who is not a skilled technician, equipment or walls anywhere can be easily installed. also reduce unnecessary circuit, If film sensor is connected to operate, have a big competitive price, the detection of liquid and the surrounding environment according to, the sensor film that can set the sensitivity control, and monitoring system was implemented.