• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.266-272
• /
• 2015

High temperature impairs rice grain yield and quality. To understand the effect of high temperature on leaf physiological activity and grain filling, two cultivars of rice that Dongan and Ilpum were exposed to high temperature during ripening stage. Grain filling rate, perfect grain ratio and grain weight of high temperature ($27^{\circ}C{\pm}4^{\circ}C$) treated both rice cultivars were decreased than those of control temperature ($22^{\circ}C{\pm}4^{\circ}C$) treated. The reduction rates of grain filling ratio, perfect grain ratio and grain weight of high temperature treated to control treated rice were higher in Ilpum than Dongan. Chlorophyll contents of rice leaves under high temperature at early ripening stage were higher than those of control temperature, but those were slowly decreased with no difference between temperature treatment since at mid ripening stage. Although chlorophyll a/b ratio under high temperature was decreased from heading to 15 days after heading, that was gradually increased since 15 days after heading. Protein concentrations of rice leaves for ripening stage was a similar pattern with chlorophyll changes. The rate of photosynthesis at 14 days after heading under high temperature was higher than those of control temperature, but there was no difference at those of 7 and 34 days after heading between two temperature treatment. Free sugars under high temperature treated leaves were lower than control temperature. Consequently, these results exhibit that high temperature accelerate leaf physiological activity as chlorophyll synthesis and photosynthesis rate unlike the deterioration of grain filling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.753-761
• /
• 2012

In this paper, we study a power allocation technique for Tomlinson-Harashima precoding (THP) in multi-user multiple input single output (MISO) downlink systems. In contrast to previous approaches, a mutual information based method is exploited for maximizing the sum rate of zero-forcing THP systems. Then, we propose a simple power allocation algorithm which assigns proper power level for modulo operated users. Simulation results show that the proposed scheme outperforms a conventional water-filling method, and it provides similar performance with near optimal method with much reduced complexity.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.752-765
• /
• 2015

We propose a novel post-processing algorithm and its very-large-scale integration architecture that simultaneously uses the passive and active stereo vision information to improve the reliability of the three-dimensional disparity in a hybrid stereo vision system. The proposed architecture consists of four steps - left-right consistency checking, semi-2D hole filling, a tiny adaptive variance checking, and a 2D weighted median filter. The experimental results show that the error rate of the proposed algorithm (5.77%) is less than that of a raw disparity (10.12%) for a real-world camera image having a $1,280{\times}720$ resolution and maximum disparity of 256. Moreover, for the famous Middlebury stereo image sets, the proposed algorithm's error rate (8.30%) is also less than that of the raw disparity (13.7%). The proposed architecture is implemented on a single commercial field-programmable gate array using only 13.01% of slice resources, which achieves a rate of 60 fps for $1,280{\times}720$ stereo images with a disparity range of 256.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4145-4164
• /
• 2016

Energy harvesting is an increasingly attractive source of power for cellular networks, and can be a promising solution for green networks. In this paper, we consider a cellular network with power beacons powering multiple mobile terminals with microwave power transfer in energy beamforming. In this network, the power beacons are powered by grid and renewable energy jointly. We adopt a dual-level control architecture, in which controllers collect information for a core controller, and the core controller has a real-time global view of the network. By implementing the water filling optimized power allocation strategy, the core controller optimizes the energy allocation among mobile terminals within the same cluster. In the proposed green energy cooperation paradigm, power beacons dynamically share their renewable energy by locally injecting/drawing renewable energy into/from other power beacons via the core controller. Then, we propose a new water filling optimized green energy cooperation management strategy, which jointly exploits water filling optimized power allocation strategy and green energy cooperation in cellular networks. Finally, we validate our works by simulations and show that the proposed water filling optimized green energy cooperation management strategy can achieve about 10% gains of MT's average rate and about 20% reduction of on-grid energy consumption.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.195-202
• /
• 2016

In general, piston pumps are frequently used for concrete pumping. Filling coefficient signifies the ratio volume of a hydraulic cylinder to volume of concrete inside the cylinder. Therefore, it may be considered as a parameter directly affecting the flow rate and efficiency for concrete pumping. However, accurate analyses on this aspect have not yet been performed. In this paper, the data measured from horizontal pipeline pumping tests for 350m and 548m in length was analyzed to identify the relationships of rheological properties of concrete and stroke time with the filling coefficient. In addition, an equation allowing prediction of the filling coefficient from rheological properties of concrete and stroke time has been suggested.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.55-59
• /
• 2012

Defects such as voids or seams are frequently found in TSV via filling process. To achieve defect-free copper via filling, organic additives such as suppressor, accelerator and leveler were necessary in a copper plating bath. However, by-products stemming from the breakdown of these organic additives reduce the lifetime of the devices and plating solutions. In this research, the effects of levelers on copper electrodeposition were investigated without suppressor and accelerator to lower the concentration of additives. Threelevelers(janus green B, methylene violet, diazine black) were investigated to study the effects of levelers on copper deposition. Electrochemical behaviors of these levelers were different in terms of deposition rate. Filling performances were analyzed by cross sectional images and its characteristics were different with variations of levelers.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.415-418
• /
• 1999

The characteristics of VRLA (valve regulated Iead-acid) battery with the tubular positive plate and gel type electrolyte were examined as a function of active material filling density. The filling density of positive plate was 3.2 g/mL, 3.4 g/mL, and 3.6 g/mL, respectively. These VRLA batteries were cycled with 100% DOD (depth of discharge) at the $C_5/5$ rate, followed by IU-type recharge with $I_{max}=0.2C_{10}/10$ and a final voltage V=2.40 V/cell. The test was performed in a thermostatic room at $25{\pm}1^{\circ}C$. The result indicated that the initial capacity was independent of active material filling density, i.e., the highest initial capacity was 3.4 g/mL of filling density and the lowest was 3.6 g/mL. On aspect of the cycle-life performance of the VRLA battery, the filling density of 3.6 g/mL was similar to that of 3.4 g/mL in the positive plate, and both were higher than that of 3.2 g/mL. Water-loss and degradation of the VRLA battery were decreased according to an increase of the filling density in the positive plate. The optimum filling density of the active material was 3.4~3.6 g/mL.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.196-207
• /
• 2016

In monsoon climates, persistent shade is a troublesome weather condition with an impact on the growth and yield of corn (Zea mays L.). We imposed 7, 14, 21, and 28 days of consecutive shade (CS) on Gwangpyeongok and P3394 corn hybrids at the beginning of the kernel filling stages. Shade had little impact on leaf area and dry matter accumulation in the stem and leaves. However, dry matter accumulation in the ear was severely reduced by approximately 28% and 53% after 14 and 28 days of CS, respectively. For the components of grain yield, 7 and 14 days of shade did irreparable damage to the number of filled kernels, the kernel number per ear row, and the percent of filled kernels, but did little damage or reversible damage after removal of the shade to the 100-grain weight and the row number per ear. Shade significantly reduced the relative growth rate (RGR) due to a decrease in the net assimilation rate (NAR). These results suggest that source activity limitation by shade during the kernel filling stages leads to the inhibition of sink activity and size. The yield of biomass, ear, and grain logistically declined as the length of CS increased. Probit analysis revealed that the number of days of CS needed to cause 25% and 50% reductions in grain yield were 3.7 and 23.1, respectively. These results suggest that the plant yield loss induced by shade at the beginning of the kernel filling stages is mainly achieved within the first 7 days of consecutive shade.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.31
• /
• pp.3-25
• /
• 2006

This study focus on interest for arrears and filling of the gaps left in Article 78 of CISG. In the case of CISG, Article 78 provides for interest any time a payment under a contract is untimely, but does not specify a particular rate of interest or a method to determine such a rate. This issue did not cause any uncertainty under ULIS, the CISG's antecedent, since Article 83 of ULIS provided for 1%p above the official discount rate in the creditor's country. Lacking any CISG general principle as well as any indication by the very same CISG, one can only conclude that the matter must be deferred to the domestic rule of private international law. Actually, resorting to private international law is not only admissible, but expressly required by Article 7(2). In the interpretation and filling of the gaps left in Article 78, there is a considerable difference of opinion especially amongst commentators on whether the gap is a lacuna praeter legem, i.e., one being governed by, but not expressly settled in the CISG, or whether it is an issue falling outside the scope of application of the CISG, i.e. a lacuna intra legem. The protagonists of the former view lay emphasis on the overall objective of the CISG, namely to create a uniform law, whereas the supporters of the latter view refer to the legislative history of Article 78 as the dominant principle in interpreting Article 78. Some authors believe that the issue of determining the rate of interest is not dealt with by CISG and it is, therefore, governed by the applicable domestic law, which is the subsidiary law applicable to the sales contract, since "no special connecting points seem to have developed for the entitlement to interest." In the light of the relevant case law, it seems correct to conclude that the interest rate is not determined by CISG and that courts normally determine it according to their own rules of private international law. While CISG Article 78 expressly does not deal with this issue, PICC Article 7.4.9 and PECL Article 9.508, on the other hand, set forth a precise method for computing interest. Although a method like the one set by PICC may be useful and may encourage uniformity, it still cannot be used under the CISG. The PICC or PECL formula may, however, be a very good starting point in a de jure condendum analysis when a new Article 78 will be drafted, if an interest rate method will ever be embodied in the text of an international convention.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.1
• /
• pp.52-61
• /
• 1994

Background : The demand for refinement in noninvasive and quantitative assessment of left ventricular (LV) function is increasing. Purpose : To assess normal values of left ventricular functional parameters during both systole and diastole by scintigraphic method using computerized triple-head gamma camera and to evaluate correlations between these parameters. Methods : ECG gated blood pool scan with $^{99m}Tc$-Human serum albumin was performed in 94 normal Korean subjects. Ejection fraction (EF), systolic parameters [peak emptying rate (PER), average emptying rate (AER), time to peak emptying rate (TPER)], and diastolic parameters [peak filling rate (PFR), average filling rate (AFR), time to peak filling rate (TPFR)] were obtained by analysis of LV time-activity curve, the correlation of these parameters to the age and sex, and the correlation between these parameters were evaluated. Results : 1) Mean value of ejection fraction in study subjects was $59.6{\pm}5.25%$ and showed no significant correlation to age (r=-0.08) and sex but showed most pronounced correlation to PFR (r=0.46, p<0.001), PER (r=0.41, p<0.001), AFR (r=0.34, p<0.001) and AER (r=0.28, p<0.01). 2) Mean values of systolic parameters were as follows: $PER=3.22{\pm}0.50$ end-diastolic volume/sec, $AER=2.22{\pm}0.45$ end-diastolic volume/sec, $TPER=103.5{\pm}29.30$ msec. They showed no significant correlation to age and sex. 3) Mean values of diastolic parameters were as follows: $PFR=2.71{\pm}0.51$ end-diastolic volume/sec, $AFR=1.83{\pm}0.44$ end-diastolic volume/sec, $TPFR=132.1{\pm}33.45$ msec. They showed strong correlation to age (r=0.70, -0.64, 0.37, p<0.001). Conclusions : Left ventricular functional parameters in normal Korean subjects were obtained reliably by computerized scintigraphic method and may be applied to the evaluation of cardiac function in diseased patients.