• 한국지반신소재학회논문집
• /
• 제15권2호
• /
• pp.65-75
• /
• 2016

본 연구에서는 최근 적용사례가 급증하고 있는 가압식 그라우팅을 이용한 쏘일네일링의 현장인발시험 자료를 수집하여 데이터베이스를 구성하였으며, 기존의 도해법을 이용한 극한인발저항력 판정법의 문제점을 보완하기 위하여 비선형회귀분석을 이용하여 극한인발저항력을 판정하는 방법을 제안하였다. 비선형회귀분석에 의해 추정된 하중-변위곡선은 현장인발시험 자료와 매우 높은 상관성을 보였으며, 도해법에 의해 판정된 극한인발하중에 비해 평균 29% 정도 크게 판정되었다. 쏘일네일의 하중-변위곡선이 항복하중 이후에 급격한 변위를 보이는 경우에는 S자 성장곡선 회귀모형이 가장 적합하며, 인발하중과 변위의 증가량이 점진적으로 감소하는 파괴거동을 보이는 하중-변위곡선은 점근적 방법이 가장 적합한 회귀모형으로 평가되었다. 본 연구로부터 제안된 단위극한주면 마찰 저항력은 국내 지반특성과 가압식 그라우팅 공법의 특성이 반영된 것으로 해외 연구결과로부터 제시된 설계도표를 이용하던 문제점을 개선함으로써 독자적인 설계기준을 확보하는데 기여할 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1079-1083
• /
• 2009

In this study, the pullout resistance characteristic of a wedge-shaped soil nail, made by attaching small steel sticks to the tip of a nail in a wedge shape, was investigated. It was developed to improve the overall pullout resistance capacity of the existing soil nail system, composed of nail and grout, by making the wedge provide additional pullout resistance. In order to evaluate the pullout resistance of the wedge shape-soil nail, field pullout tests were conducted, and the results were compared with those for the existing soil nail without the wedge. The field test results showed that the pullout resistance capacity of the wedge-shaped soil nail was 50% larger than that of the existing soil nail without the wedge.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.841-849
• /
• 2018

The purpose of a rock bolt is to improve the mechanical performance of a jointed-rock mass. The performance of a rock bolt is generally evaluated by conducting a field pullout test, as the analytical or numerical evaluation of the rock bolt behavior still remains difficult. In this study, wide range of field test was performed to investigate the pullout resistance of rock bolts considering influencing factors such as the rock type, water bearing conditions, rock bolt type and length. The test results showed that the fully grouted rock bolt (FGR) in water-bearing rocks can be inadequate to provide the required pullout resistance, meanwhile the inflated steel tube rock bolt (ISR) satisfied required pullout resistance, even immediately after installation in water-bearing conditions. The ISR was particularly effective when the water inflow into a drill hole is greater than 1.0 l/min. The effect of the rock bolt failure on the tunnel stability was investigated through numerical analysis. The results show that the contribution of the rock bolt to the overall stability of the tunnel was not significant. However, it is found that the rock bolt can effectively reinforce the jointed-rock mass and reduce the possibility of local collapses of rocks, thus the importance of the rock bolt should not be overlooked, regardless of the overall stability.

• 한국해양공학회지
• /
• 제16권2호
• /
• pp.44-52
• /
• 2002

The mechanism of pullout resistance of compression anchor is analysed. This anchor is developed through the field pullout tests and the laboratory element test. The compression anchor is characterized by decrease of progressive failure, simple site work, economy and durability compared with tension anchor. The characteristics of compression anchor, compared with tension anchor. mainly are summarized as follows ; (1) The plastic displacement of anchor body is very small during pullout of anchor. (2) Total anchor length decreases by the shortening of free length; (3) The progressive failure is decreased.; (4) The safety factor for pullout resistance increases with time after construction of anchor.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.538-541
• /
• 2007

본 연구에서는 복합 AAM 영구 앵커를 소개하고, 앵커의 설계시 인발력($P_a$)에 의해 앵커에 작용하는 힘의 관계 검토, 지압파괴에 대한 검토, 앵커사이 지반에서의 인장파괴 유발하중 검토 등을 통하여 복합 AAM 영구 앵커의 설계법을 소개하였다. 그리고 복합 AAM 영구 앵커의 거동특성을 알아보기 위하여 설계법의 의한 예측결과와 현장인발시험 결과를 비교 검토하였다.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.5-16
• /
• 2014

본 논문에서는 현장인발재하시험을 통한 스크류 앵커 파일의 인발 저항 특성에 관한 연구내용을 제시하였다. 현장시험에서는 동일한 피치를 가지나 샤프트나 스크류 직경이 다른 스크류 앵커 파일에 대해 다양한 시공조건을 도출하고 이에 대한 시험을 수행하였다. 실험결과 스크류 앵커 파일은 스크류가 없는 파일에 비해 현저히 큰 인발저항력을 발휘하는 것으로 검토되었으며 시간경과 효과와 그라우팅 여부에 따른 검토 결과 일반 파일과 유사하게 시간경과에 따라 인발저항력이 증가하는 셋업효과와 그라우팅시 인발저항력 상승효과를 기대할 수 있는 것으로 분석되었다. 이와 아울러 기존의 헬리컬 파일의 인발저항력 산정식을 스크류 앵커 파일의 인발저항력 평가에 있어서의 적용성을 검토하였으며 현장인발재하 시험결과를 다양한 측면에서의 상관관계를 파악할 수 있도록 제시하고 연구결과의 실무적 관점에서의 검토 내용을 기술하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.419-433
• /
• 2009

Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of residual stress; and the increase of coefficient of pullout friction. From the laboratory tests, it was found that residual stress in borehole increases by pressurized grouting and dilatancy angle could be estimated by cavity expansion theory using the measured wall displacements. From the field test results, the pullout resistance of soil-nailing with pressurized grouting was found to be 10% larger than that of soil-nailing with gravitational grouting, mainly caused by mean normal stress increase and dilatancy effect. So, the pullout resistance could be estimated by considering these two effects. The radial displacement increases with dilatancy angle increase and the dilatancy angle decreases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the cavity expansion theory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.819-824
• /
• 2005

Anchor system is widely used in construction works to support retaining structures. The compression anchor is characterized by excellent mechanism of pullout resistance, as well as less probability of progressive failure than a tension anchor. This paper presents the mechanical characteristics of a newly developed compression anchor(JR-2000). Field tests were performed to investigate characteristics of the pullout resistance of compression anchor.

• 한국지반환경공학회 논문집
• /
• 제8권4호
• /
• pp.5-11
• /
• 2007

양단정착형 네일의 인발력을 평가하기 위하여 여러 조건에 대한 현장실험을 실시하였다. 현장인발시험은 연암, 풍화암 및 토사지반를 대상으로 인발력, 변위 및 그라우트와 네일의 마찰력 등을 측정하였으며, 이의 결과를 동일 조건에서 실시된 일반네일의 시험결과와 비교하였다. 시험결과 한계인발력은 양단정착형네일이 일반네일에 비하여 토사지반에서는 2배 이상, 풍화암에서는 약 1.6배 큰 것으로 분석되었으며, 단위길이당 주면마찰력도 양단정착형네일이 일반네일에 비하여 약 1.8~3배정도 증대되는 효과가 있는 것으로 분석되었다. 또한, 네일종류에 따른 하중전이특성 분석결과 양단정착형네일의 경우에는 변위는 작고, 네일 전 길이에 걸쳐 하중을 균등하게 부담함을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1240-1249
• /
• 2008

Jacket anchor was developed to increase the pullout resistance of general ground anchor in soft ground, and the mechanism of pullout resistance of jacket anchor was analyzed. Also, the ultimate bond stress of jacket anchor was estimated by ultimate resistance which is determined by field tests. Grout milk was injected into the jacket to make grout bulb of jacket anchor. The formation of grout bulb of jacket anchor increases the diameter of grout bulb, ground strength and confining pressure between anchor grout and soil. From the twelve field test results, it was observed that the pullout resistance of jacket anchor is 15.38~295.02%(average 83.53%) greater than that of general ground anchor, and plastic deformation of jacket anchor is 20.78~1,496.45%(average 288.78%) smaller than that of general ground anchor at the same load cycle. Especially, it was investigated that the increase of ultimate resistance over 200% and the reduction of plastic deformation over 600% was obtained in gravel layer. It means that the jacket anchor is superior to the general ground anchor in gravel layer. Finally, the ultimate bond stress was proposed to design jacket anchor.