Browse > Article
http://dx.doi.org/10.12989/gae.2018.15.3.841

Anchorage mechanism and pullout resistance of rock bolt in water-bearing rocks  

Kim, Ho-Jong (Department of Civil Engineering, Konkuk University)
Kim, Kang-Hyun (Department of Civil Engineering, Konkuk University)
Kim, Hong-Moon (Department of Geotechnical & Tunnel Engineering, Pyunghwa Engineering)
Shin, Jong-Ho (Department of Civil Engineering, Konkuk University)
Publication Information
Geomechanics and Engineering / v.15, no.3, 2018 , pp. 841-849 More about this Journal
Abstract
The purpose of a rock bolt is to improve the mechanical performance of a jointed-rock mass. The performance of a rock bolt is generally evaluated by conducting a field pullout test, as the analytical or numerical evaluation of the rock bolt behavior still remains difficult. In this study, wide range of field test was performed to investigate the pullout resistance of rock bolts considering influencing factors such as the rock type, water bearing conditions, rock bolt type and length. The test results showed that the fully grouted rock bolt (FGR) in water-bearing rocks can be inadequate to provide the required pullout resistance, meanwhile the inflated steel tube rock bolt (ISR) satisfied required pullout resistance, even immediately after installation in water-bearing conditions. The ISR was particularly effective when the water inflow into a drill hole is greater than 1.0 l/min. The effect of the rock bolt failure on the tunnel stability was investigated through numerical analysis. The results show that the contribution of the rock bolt to the overall stability of the tunnel was not significant. However, it is found that the rock bolt can effectively reinforce the jointed-rock mass and reduce the possibility of local collapses of rocks, thus the importance of the rock bolt should not be overlooked, regardless of the overall stability.
Keywords
pullout resistance; rock bolt; tunnel; water inflow;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ASTM D4435-13e1. (2013), Standard Test Method for Rock Bolt Anchor Pull Test, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
2 Cai, Y., Esaki, T. and Jiang, Y. (2004), "An analytical model to predict axial load in grouted rock bolt for soft rock tunneling", Tunn. Undergr. Sp. Technol., 19(6), 607-618.   DOI
3 Carranza-Torres, C. and Fairhurst, C. (2000), "Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure criterion", Tunn. Undergr. Sp. Technol., 15(2), 187-213.   DOI
4 Farmer, I.W. (1975), "Stress distribution along a resin grouted rock anchor", J. Rock Mech. Min. Sci. Geomech. Abstr., 12(11), 347-351.   DOI
5 Hyett, A.J., Moosavi, M. and Bawden, W.F. (1996), "Load distribution along fully grouted bolts, with emphasis on cable bolt reinforcement", J. Numer. Anal. Meth. Geomech., 20(7), 517-544.   DOI
6 Jalalifar, H. (2006), "A new approach in determining the load transfer mechanism in fully grouted bolts", Ph.D Dissertation, University of Wollongong, New South Wales, Australia.
7 Jia, P. and Tang, C.A. (2008), "Numerical study on failure mechanism of tunnel in jointed rock mass", Tunn. Undergr. Sp. Technol., 23(5), 500-507.   DOI
8 Jiang, S.H., Li, D.Q., Zhang, L.M. and Zhou, C.B. (2014), "Time-dependent system reliability of anchored rock slopes considering rock bolt corrosion effect", Eng. Geol., 175, 1-8.   DOI
9 Khan, A.J., Mostofa, G. and Jadid, R. (2017), "Pullout resistance of concrete anchor block embedded in cohesionless soil", Geomech. Eng., 12(4), 675-688.   DOI
10 Kilic, A., Yasar, E. and Celik, A.G. (2002), "Effect of grout properties on the pull-out load capacity of fully grouted rock bolt", Tunn. Undergr. Sp. Technol., 17(4): 355-362.   DOI
11 Kristjansson, G. (2014), "Rock bolting and pull out test on rebar bolts," Master Dissertation, Institutt for Geologi og Bergteknikk, Trondheim, Norway.
12 KTA. (2014a), A Study on the Rock Bolt Installation and its Effect on the Tunnel Stability in Water-Bearing Rock, Korean Tunnelling and Underground Space Association (KTA), Seoul, Korea.
13 KTA. (2014b), A Study on Proper Rock Bolt Installation Method in the High Speed Railway Tunnel, Korean Tunnelling and Underground Space Association (KTA), Seoul, Korea.
14 Huang, M., Xu, C.S., Zhan, J.W. and Wang, J.B. (2017), "Comparative study on dynamic properties of argillaceous siltstone and its grouting-reinforced body", Geomech. Eng., 13(2), 333-352.   DOI
15 Li, Y., Luo, R., Zhang, Q., Xiao, G., Zhou, L. and Zhang, Y. (2017), "Model test and numerical simulation on the bearing mechanism of tunnel-type anchorage", Geomech. Eng., 12(1), 139-160.   DOI
16 Li, C. and Hakansson, U. (1999), "Performance of the Swellex bolt in hard and soft rocks", Proceedings of the International Conference on Rock Support and Reinforcement Practice in Mining, Kalgoorlie, Australia, March
17 Li, C. and Stillborg, B. (1999), "Analytical models for rock bolts", J. Rock Mech. Min. Sci., 36(8), 1013-1029.   DOI
18 Li, C.C. (2016), "Analysis of inflatable rock bolts", Rock Mech. Rock Eng., 49(1), 273-289.   DOI
19 Malhotra, V.M., and Carino, N.J. (2003), Handbook on Nondestructive Testing of Concrete Second Edition, CRC Press, Boca Raton, Florida, USA.
20 Merifield, R.S. and Smith, C.C. (2010), "The ultimate uplift capacity of multi-plate strip anchors in undrained clay", Comput. Geotech., 37(4), 504-514.   DOI
21 Oreste, P. (1994), "Comportamento di bulloni passivi in galleria: Un nuovo modello di simulazione", Gallerie e Grandi Opere Sotterranee, 32-41.
22 Oreste, P.P. (2003), "Analysis of structural interaction in tunnels using the covergence-confinement approach", Tunn. Undergr. Sp. Technol., 18(4), 347-363.   DOI
23 Osgoui, R.R. and Unal, E. (2009), "An empirical method for design of grouted bolts in rock tunnels based on the Geological Strength Index (GSI)", Eng. Geol., 107(3), 154-166.   DOI
24 Vu, K.A.T. and Stewart, M.G. (2000), "Structural reliability of concrete bridges including improved chloride-induced corrosion models", Struct. Saf., 22(4), 313-333.   DOI
25 Zhu, C., Chang, X., Men, Y. and Luo, X. (2015), "Modeling of grout crack of rockbolt grouted system", J. Min. Sci. Tech., 25(1), 73-77.   DOI
26 Wijk, G. and Skogberg, B. (1982), "The inflatable rock bolting system", Proceedings of the 14th Canadian Rock Mechanics Symposium. Canadian Institute of Mining and Metallurgy, Vancouver, British Columbia, Canada, May.
27 Zhang, C.C., Xu, Q., Zhu, H.H., Shi, B. and Yin, J.H. (2014), "Evaluations of load-deformation behavior of soil nail using hyperbolic pullout model", Geomech. Eng., 6(3), 277-292.   DOI