Journal of the Korean Geosynthetics Society (한국지반신소재학회논문집)

Korean Geosynthetics Society (한국지반신소재학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of Ultimate Pullout Resistance of Soil-Nailing Using Nonlinear

비선형회귀분석을 이용한 가압식 쏘일네일링의 극한인발저항력 판정

  • Received : 2016.05.19
  • Accepted : 2016.06.17
  • Published : 2016.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we constructed a database by collecting field pullout test data of the soil nailing using pressurized grouting, and suggested a method to estimate the ultimate pullout resistance using nonlinear regression analysis to overcome the problems of ultimate pullout resistance estimation using graphical methods. The load-displacement curve estimated by nonlinear regression showed a very high correlation with the field pullout test data. Estimated ultimate pullout load by nonlinear regression method was average 29% higher than estimated ultimate pullout load using previous graphical method. A sigmoidal growth model was found to be the best-fitting nonlinear regression model against rapid pullout failure. Further, an asymptotic regression model was found to be the best fit against progressive nail pullout. The unit ultimate skin friction suggested in this research reflected in the domestic geotechnical characteristics and the specifications of the pressurized grouting method. This research is expected to contribute towards establishing an independent design standard for the soil nailing by providing solutions to the problems that occur when using design charts based on foreign research.

본 연구에서는 최근 적용사례가 급증하고 있는 가압식 그라우팅을 이용한 쏘일네일링의 현장인발시험 자료를 수집하여 데이터베이스를 구성하였으며, 기존의 도해법을 이용한 극한인발저항력 판정법의 문제점을 보완하기 위하여 비선형회귀분석을 이용하여 극한인발저항력을 판정하는 방법을 제안하였다. 비선형회귀분석에 의해 추정된 하중-변위곡선은 현장인발시험 자료와 매우 높은 상관성을 보였으며, 도해법에 의해 판정된 극한인발하중에 비해 평균 29% 정도 크게 판정되었다. 쏘일네일의 하중-변위곡선이 항복하중 이후에 급격한 변위를 보이는 경우에는 S자 성장곡선 회귀모형이 가장 적합하며, 인발하중과 변위의 증가량이 점진적으로 감소하는 파괴거동을 보이는 하중-변위곡선은 점근적 방법이 가장 적합한 회귀모형으로 평가되었다. 본 연구로부터 제안된 단위극한주면 마찰 저항력은 국내 지반특성과 가압식 그라우팅 공법의 특성이 반영된 것으로 해외 연구결과로부터 제시된 설계도표를 이용하던 문제점을 개선함으로써 독자적인 설계기준을 확보하는데 기여할 수 있을 것으로 기대된다.

Keywords

References

  1. Byun, J. K. (2001), A Study on Soil-Nail interaction Behavior, M.A Thesis, Pusan National University, Korea.
  2. Chin, F. K. (1971), "Pile Tests-Arkansas River Project", Journal of Soil Mechanics and Foundation Division, ASCE, Vol.97, No.SM6, pp.930-932.
  3. Choi, D. N. (2007), Analysis of Reinforcement Mechanism of Pressure-Type Steel Pipe Nailing, Ph.D Thesis, Chungnam National University, Korea.
  4. Clouterre (1991), Recommandations CLOUTERRE 1991-Soil Nailing Recommendations 1991, English Translation, Presses de l'Ecole Nationale des Ponts et Chaussees, Paris, France.
  5. Elias, V. and Juran, I. (1991), Soil Nailing for Stabilization of Highway Slopes and Excavations, Publication FHWA-RD-89-198, Federal Highway Administration, Washington D.C.
  6. Eo, G. (2016), Development of Rainfall-Flood Damage Estimation Function using Nonlinear Regression Equation, M.A Thesis, In-ha University, Korea.
  7. Gassler, G., and Gudehus, G. (1981), "Soil nailing-some aspect of a new technique.", Proceedings of Xth ICMSFE, Stockholm, pp.665-670.
  8. Guiloux, A. and Schlosser, F. (1984), "Soilnailing, practical application", Symposium on Soil and Rock Improvement Techniques, Geotextiles, Reinforcement Earth and Modern Piling Methods, Bangkok.
  9. Hagan, M. T., Demuth, H. P., and Beale, M. (1996), Neural Network Design, PWS Publishing, Boston.
  10. Hong, H. S. (2013), Analysis of the Behavior of Soil-nailing due to Pressurized Grouting by In-situ and Laboratory Model Tests, Sangmyung University, Korea.
  11. Jang, S. A. (2010), An Effect of the Soil Reinforcement by the Pretension Nail, Ulsan University, Korea.
  12. JHPC (2002), Design and Construction Guidelines for Reinforced Soil Structures, Japan Highway Public Corporation, Japan Road Association.
  13. Jung, Y. D. (2013), The Development of End-expended Soil Nailing Method for Ground Reinforcement and Its Behavior Characteristics and Estimation Equation Proposed, M.A Thesis, Gyeongnam National University of Science and Technology, Korea.
  14. KHC (2003), Guideline of Pullout Test for Slope Reinforcement Anchor and Nail, Korea Highway Corporation, South Korea, pp.4-19.
  15. Kim, B. S. (2003), A Study on Behavior Characteristics of the Pretension Soil Nailing System, M.A Thesis, Hongik University, Korea.
  16. Kim, J. S., Yi, C. T., Min, K. J., and Lee, S. (1999), "A Study on Load Transfer between Soil and Nail Using In-Situ Pull-out Tests", Conference of Korean Geotechnical Society, pp.9-16.
  17. Kim, K. H. (2010), An Estimation on the Pullout Resistance Characteristics of Pressurized Soil Nailing System, M.A Thesis, Cheongju University, Korea.
  18. Kim, H. J. (2013), Analysis of Reinforcement Mechanism of Precast Panel Retaining Wall Method Using Pressure-injected Grouting Steel Pipe Nailing, Ph.D Thesis, Chungnam National University, Korea.
  19. Kim, Y. G. (1999), Centrifuge Modeling of Soil Nailing System, Ph.D Thesis, Kangwon National University, Korea.
  20. KISTEC (2014), Construction Slope Reinforcement Anchor and Nail Designs Commentary, Korea Infrastructures Safety Coperation, South Korea, pp.17-38.
  21. Kondner, R. L. (1963), "Hyperbolic Stress-Strain Response: Cohesive Soils", Journal of Soil Mechanics and Foundation Division, ASCE, Vol.89, No.SM1, pp.115-143.
  22. Kwon, J. O. (2013), Reinforced Effect of Extension Section for Steel Pipe Nail, M.A Thesis, Hanbat National University, Korea.
  23. Oh, J. Y. (2007), Behavior Analysis of Pretensioned Soil Nailing, M.A Thesis, University of Seoul, Korea.
  24. Park, J. M., Han, Y. B., and Jang, Y. S. (2013), "Estimation of Ultimate Bearing Capacity of Gravel Compaction Piles Using Nonlinear Regression Analysis", Journal of Korean Society of Coastal and Ocean Engineers, Vol.25, No.2, pp.112-121. https://doi.org/10.9765/KSCOE.2013.25.2.112
  25. Park, J. S. (2007), Behavior Characteristics of the Pressurized Grouting Soil Nailing System from the Field Pull-out Tests, M.A Thesis, Hanyang University, Korea.
  26. Park, S. S. (2003), Stability Analysis and Application of the Pretensioned Soil Nailing Systems, Ph.D Thesis, Hongik University, Korea.
  27. Ryu, J. S. and Kim, S. Y. (1995), "A Study on the Vertical Bearing Capacity of Pile using the Maximum Curvature Method", Journal of Korean Geotechnical Engineering, Vol.11, No.4, pp.5-12.
  28. Schlosser, F. (1983), "Analogies et difference dan le component et le calcul des ourages de soutenement en terre armee et par clouage du sol", Sols et Fondations 184, Annales ITBTP, No.418, pp.8-23.
  29. Shen, C. K., Bang, S., and Hermann, L. R. (1981), "Ground movement analysis of earth support system", Journal of Geotechnical Engineering Division, Vol.107, No.GT12, pp.1609-1624.
  30. Stocker, M. F., Korber, G. W., Gassler, G., and Gudehus, G. (1979), "Soil Nailing", International Conference on Soil Reinforcement: Reinforced Earth and other Techniques, Paris, pp.469-474.
  31. Stuedlein, A. W. (2008), Bearing Capacity and Displacement of Spread Footings on Aggregate Pier Reinforced Clay, Ph.D. Dissertation, University of Washington.
  32. Won, S. Y, Hwang, S. I, and Cho, N. J. (1996), "Yield Load Interpretation for Drilled Shaft Foundations by Hyperbolic-Approximation", Journal of Korean Geotechnical Engineering, Vol.12, No.6, pp.79-86.
  33. Youn, B. T. (2009), Field Application of the Pressurized Grouting Soil Nailing Systems, M.A Thesis, Hanyang University, Korea.
  34. Youn, D. K. (2002), A Study on the Behavior of Soil Nailing in Weathered Rock, M.A Thesis, Hankyung University, Korea.