• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.813-821
• /
• 2015

In this paper, we analyzed the problems of a batch-type sterilizer and design a continuous sterilizer to control the temperature deviation. The temperature deviation is analyzed with respect to design parameters such as a nozzle diameter, hole diameter, and nozzle length. The significant temperature parameters are optimized using the response surface methodology. An experimental apparatus is developed using the optimized design parameters. Using a field test, we show that the target temperature is obtained in about 7.3 minutes and the temperature deviation is improved about $0.84^{\circ}C$. The optimized parameters from the test are equal to the analytical parameters.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.205-216
• /
• 2020

An arbiter physical unclonable function (APUF) has exponential challenge-response pairs and is easy to implement on field-programmable gate arrays (FPGAs). However, modeling attacks based on machine learning have become a serious threat to APUFs. Although the modeling-attack resistance of an MA-APUF has been improved considerably by architecture modifications, the response generation method of an MA-APUF results in low uniqueness. In this study, we demonstrate three design problems regarding the low uniqueness that APUF-based strong PUFs may exhibit, and we present several foundational principles to improve the uniqueness of APUF-based strong PUFs. In particular, an improved MA-APUF design is implemented in an FPGA and evaluated using a well-established experimental setup. Two types of evaluation metrics are used for evaluation and comparison. Furthermore, evolution strategies, logistic regression, and K-junta functions are used to evaluate the security of our design. The experiment results reveal that the uniqueness of our improved MA-APUF is 81.29% (compared with that of the MA-APUF, 13.12%), and the prediction rate is approximately 56% (compared with that of the MA-APUF (60%-80%).

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.530-543
• /
• 2015

Air-cooling method is adopted on the basis of the requirements for the thermal stability and convenient field use of an electrical source transmitter. The power losses of the transmitter are determined after calculating the losses of the alternating current (AC)-direct current (DC) power supply, the constant-current circuit, and the output circuit. According to the analysis of the characteristics of a heat sink with striped fins and a fan, the engineering calculation expression of the Nusselt number and the design process for air-cooled dissipation are proposed. Experimental results verify that the error between calculated and measured values of the transmitter losses is 12.2%, which meets the error design requirements of less than 25%. Steady-state average temperature rise of the heat sink of the AC-DC power supply is $22^{\circ}C$, which meets the design requirements of a temperature rise between $20^{\circ}C$ and $40^{\circ}C$. The transmitter has favorable thermal stability with 40 kW output power.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.259-267
• /
• 2019

An active clamp flyback (ACF) converter applies a clamp circuit and circulates the energy of leakage inductance to the input side, thereby achieving a zero-voltage switching (ZVS) operation and greatly reducing switching losses. The switching losses are further reduced by applying a gallium nitride field effect transistor (GaN-FET) with excellent switching characteristics, and ZVS operation can be accomplished under light load with boundary conduction mode (BCM) operation. Optimal design is performed on the basis of loss analysis by selecting magnetization inductance based on BCM operation and a clamp capacitor for loss reduction. Therefore, the size of the reactive element can be reduced through high-frequency operation, and a high-efficiency and high-power-density converter can be achieved. This study proposes an optimal design for a high-efficiency and high-power-density BCM ACF converter based on GaN-FETs and verifies it through experimental results of a 65 W-rated prototype.

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.330-340
• /
• 2020

The purpose of this study was to develop Dementia-Care-Robot integrated program based on group customization and to identify effects on IADL, depression, and attitudes toward robot. This study was nonequivalent control group pre-post test design. The subjects were 40 elders diagnosed with mild dementia participating in the dementia center daily program (20 in the experimental group and 20 in the control group). Each session lasted for 30 minutes, twice a week during 6 weeks. Data were collected from July 16 to November 7, 2019, and were analyzed using SPSS WIN 22.0 program to identify differences between groups for variables. After the program, the experimental group improved in IADL, depression, but there were no significant differences between the two groups. In attitude toward robot, the experimental group showed positive change to the robot, but the control group showed negative change to it, also there was a significant difference between the two groups. Findings indicate that integrated program using Dementia-Care-Robot has potential as a strategy to improve the symptoms of dementia and to delay the progression. It needs to be applied in the medical field through convergent approach of engineering.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.7
• /
• pp.365-374
• /
• 2004

The relay measures the frequency of the power system in order to detect faults and separate them from the system. Many estimation algorithms for the relay have been proposed to accurately measure the frequency. This paper proposes a new frequency measurement method using the digital phase locked-loop(DPLL) for the relay of the power system. The proposed method is configured with a DPLL scheme and verified through computer simulations and experimental tests. In order to cope with noises in the power system, filters are included in the input signal processing part and the frequency comparator. MATLAB is used for computer simulations and an experimental setup with a CPU and an FPGA(Field Programmable Gate Array) is constructed. The loop filter of the DPLL is run in the CPU software In adjust parameters and others are in the FPGA. Experimental tests are performed lot a function generator and the power system. Results show that the proposed method is appropriate to the frequency measurement for the relay.

• Journal of East-West Nursing Research
• /
• v.17 no.2
• /
• pp.103-109
• /
• 2011

Purpose: The purpose of this study was to examine the effects of music therapy on the anxiety and distress in patients taking thoracentesis. Methods: The quasi-experimental design was used with a nonequivalent control group pre-post test time series. Participatns were divided into the experimental (n=20) or control group (n=20). Music therapy was given to the experimental group with a CD that was made by the investigator by themes. The research tools included the VAS Anxiety Inventory, and the Subjective and Objective Distress Inventory. Data were analyzed using SPSS 14.0 program by ${\chi}^2$-test and t-test. Results: There were statistically significant differences in state (VAS) anxiety and subjective distress between two groups. Conclusion: The music therapy was effective in reducing the anxiety and subjective distress of patients taking thoracentesis. In the future, music therapy will be useful in the field of nursing as a nursing intervention to alleviate stress and enhance well-being.

• Journal of Korean Biological Nursing Science
• /
• v.17 no.3
• /
• pp.253-261
• /
• 2015

Purpose: The purpose of this study was to identify the effects of the patient controlled analgesics (PCA) education program (including practicum) on post-op pain suffered by patients who have undergone gynecologic laparoscopic surgery. Methods: The research was designed for a nonequivalent control group before and after the test design. The subjects of this study were 54 in all and were divided into an experimental group and a control group. The program consisted of a brochure for PCA use and a practicum with an actual PCA instrument. Data were collected with questionnaires and observations and were analyzed on the basis of frequency, percentage, mean, standard deviation, ${\chi}^2$ and t-test. Results: Complaints regarding pain by the experimental group were significantly less than those of the control group in both post-op 24-hour and post-op 48-hour reporting. The experimental group pressed the PCA button much less frequently than the control group in post-op 24 hours. However, there were no significant differences in side effects between the two groups. Conclusion: Based on the results of this study, this PCA education program can be useful in the clinical nursing field and helpful for patients who use PCA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1169-1178
• /
• 2008

In this study, a questionnaire was compiled by conducting interviews and preliminary surveys, and then handed out to a total of 270 welders working in shipyards to investigate their opinions on welding clothes. By which investigation, it was intended to understand their dissatisfactions and issues with conventional welding clothes and then propose of such welding clothes as may offer better fit and suitability. A total of twenty welding suits were collected to find the locations and degrees of wear and tear. Due to too large differences in the locations and degrees of wear and tear among the clothes, the evaluation was focused on ten suits out of the twenty suits collected. The researcher’s subjective judgment was used to select the nineteen most severely damaged parts, which were then photographed in a uniform distance and evaluated by a group of experts in terms of the degree of damage in order to locate most severely damaged parts and select adequate materials for those parts in designing an experimental suit. Based on two above evaluations, the experimental welding suit was produced in consideration of the design, materials and patterns. A lab evaluation and a site evaluation were conducted to compare the experimental suit and other conventional suits, a lab evaluation and a field evaluation were performed.