• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.120.1-120.1
• /
• 2015

We investigate the degradation pattern of Black phosphorus (BP) field effect transistor (FETs) investigated by using an mechanically exfoliated BP that react O2 and water vapor in ambient condition, degradation. The BP FETs was electrically measured every 20 minutes (1cycle) in the air, the total cycle is 100. We show electrical changes with Mobility, On/off ratio, Current and a significant positive shift in the threshold voltage. We extracted the current level at Vgs-Vth = 0, -10, -20 and fitting with Swiss-cheese model. This model suggested that Swiss-cheese model is well fitted with degradation pattern of BP FETs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.167.1-167.1
• /
• 2015

We investigate the degradation pattern of Black phosphorus (BP) field effect transistor (FETs) was investigated by using an mechanically exfoliated BP that react O2 and water vapor in ambient condition, degradation. The BP FETs was electrically measured every 20 minutes (1cycle) in the air, the total cycle is 100. We show electrical changes with Mobility, On/off ratio, Current and a significant positive shift in the threshold voltage. We extracted the current level at Vgs-Vth = 0, -10, -20 and fitting with Swiss-cheese model. This model suggested that Swiss-cheese model is well fitted with degradation pattern of BP FETs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.17.2-17.2
• /
• 2010

Printed electronics is an emerging technology to realize various microelectronic devices via a cost-effective method. Here we demonstrated a high performance of p-channel and n-channel top-gate/bottom contact polymer field-effect transistors (FETs), and applications to elementary organic complementary inverter and ring oscillator circuits by inkjet processing. We could obtained high field-effect mobility more than $0.4\;cm^2/Vs$ for both of p-channel and n-channel FETs, and successfully measured inkjet-printed polymer inverters. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. Optimized CMOS ring oscillators with p-type and n-type polymer transistors showed as high as 50 kHz operation frequency. This research was financially supported by development of next generation RFID technology for item level applications (2008-F052-01) funded by the ministry of knowledge economy (MKE).

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.7-18
• /
• 2010

Ethylene-bridged silsesquioxane resins were synthesized from two monomers: 1,2-bis(trimethoxysilyl)ethane and methyltrimethoxysilane. The silsesquioxane thin films were spin-coated from the copolymerized resins on silicon wafer. Metal insulator metal (MIM), metal insulator semiconductor (MIS) devices were utilized to investigate the electrical properties of the copolymerized thin films. As the films were inserted as gate insulator in the OTFT devices, the field effect mobilitites were evaluated by employing Poly(3-hexylthiophene) (P3HT) as organic semiconductor, which shows that their dielectric properties and mobility values are dependent on the molecular structures and Si-OH concentration involving in the films.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.299-304
• /
• 2016

2차원 반도체 소재의 경우 물질종류마다 내포하고 있는 고유결함에 의해서 Fermi-Level Pinning 이 발생하여 이로 인한 Schottky Barrier transistor로 동작을 하게 되며, 이는 접합부에 Carrier Injection 정도와 Schottky Barrier을 통과하는 Tunneling 정도에 의해서 소자의 특성이 결정 된다. 본 연구에서는 시뮬레이션을 통하여 2차원 반도체인 $MoS_2$소자를 설계하고, S/D Doping에 따라 접촉 저항 개선 효과와 소자의 동작특성이 어떠한 영향을 미치는지 연구하여 최대 $250cm^2/V{\cdot}sec$의 field effect mobility 의 결과를 얻었다. 또한 S/D doping 에 따라 각 저항 성분의 영향을 분석하였으며 면저항 및 접촉 저항 둘 다 doping 농도가 증가함에 따라 감소하는 결과를 나타내며, S/D doping의 영향은 접촉저항에서 더 크게 나타났다. 더불어 2차원 반도체의 Resistance network model 을 제안하여 subthreshold 영역에서는 $R_{ic}$, saturation 영역에서는 $R_{ish}$ 가 전체저항에서 주요한 변수로 전체저항식에 포함되어야 한다는 것을 시뮬레이션을 통해서 검증하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.245-248
• /
• 2011

The scaling down of metal oxide semiconductor field-effect transistors (MOSFETs) for the last several years has contributed to the reduction of the scaling variables and device parameters as well as the operating voltage of the MOSFET. At the same time, the variation in the electrical characteristics of MOSFETs is one of the major issues that need to be solved. Especially because the issue with variation is magnified as the drive voltage is decreased. Therefore, this paper will focus on the variations between electrical characteristics and drain voltage. In order to do this, the test patterned multi-finger MOSFETs using 90-nm process is used to investigate the characteristic variations, such as the threshold voltage, DIBL, subthreshold swing, transconductance and mobility via parasitic resistance extraction method. These characteristics can be analyzed by varying the gate width and length, and the number of fingers. Through this modeling scheme, the characteristic variations of multi-finger MOSFETs can be analyzed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1361-1363
• /
• 2005

In this paper, we report on the performance stability of solution processible OTFT devices with Au/Ti and ITO source-drain (S/D) electrodes. It appears that the contact resistance of the S/D electrode strongly affects the stability of OTFT devices. Interestingly, the devices with the Au/Ti electrode showed lower mobility than those with the ITO (S/D) devices. The field effect mobilities of the devices with the Au/Ti and ITO electrodes were 0.06, and $0.44cm^2/Vs$, respectively. However, the mobility of the device with the Au/Ti electrode was increased up to $0.26cm^2/Vs$ after 2 weeks, while the mobility of the device with ITO electrode was slightly decreased down to $0.41cm^2/Vs$. The experimental data show us that ITO could be used as the S/D electrode for low-cost OTFT devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.7-8
• /
• 2007

We investigated the characteristics of UTB-SOI pMOSFETs with SOI thickness ($T_{SOI}$) ranging from 10 nm to 1 nm and evaluated the dependence of electrical characteristics on the silicon surface orientation. As a result, it is found that the subthreshold characteristics of (100)-surface UTB-SOI pMOSFETs were superior to (110)-surface. However, the hole mobility of (110)-surface were larger than that of (100)-surface. The enhancement of effective hole mobility at the effective field of 0.1 MV/ccm was observed from 3-nm to 5-nm SOI thickness range.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.151.2-151.2
• /
• 2016

We characterized the n-type organic field-effect transistors (OFETs) with non-conjugated polyelectrolytes (NPEs) interlayers as the electron injection layer. Novel NPEs with various ions (Cl-, Br-, I-) improved the electron mobility from $5.06{\times}10^{-3}$ to $2.10{\times}10^{-2}cm^2V^{-1}s^{-1}$ in OFETs based [6,6]-Phenyl-$C_{61}$-butyric acid methyl ester (PCBM) when $PEIEH^+I^-$ spin-cast from 0.6% solution was deposited onto the PCBM layer. Reduced electron injection barrier (${\phi}_e$) at NPE/metal electrode interface was induced by dipole formation and led to increase the electron injection and transport. These findings are important for understanding how NPEs function in devices, the improvement of device performance, and the design of new materials for use in optoelectronic devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.675-678
• /
• 2003

We studied the electrical characteristics of pentacene-based organic field-effect transistors (FETs) with polymethyl methacrylate (PMMA) or poly-4-vinylphenol (PVP) as the gate insulator. PMMA or PVP was spin-coated on the indium tin oxide glass substrate that serves as gate electrodes. The source-drain current dependence on the gate voltage shows the FET characteristics of the hole accumulation type. The transistor with PVP shows a higher field-effect mobility of 0.14 $cm^{2}/Vs$ compared with 0.045 $cm^{2}/Vs$ for the transistor with PMMA. The atomic force microscope (AFM) images indicate that the grain size of the pentacene on PVP is larger than that on PMMA. X-ray diffraction (XRD) patterns for the pentacene deposited on PVP exhibit a new Bragg reflection at $19.5{\pm}0.2^{\circ}$, which is absent for the pentacene on PMMA. This peak corresponds to the flat-lying pentacene molecules with less intermolecular spacing.