• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 전자공학회논문지B
• /
• 제28B권11호
• /
• pp.859-865
• /
• 1991

The paper proposes a design of high-speed dynamic CMOS PLA (Programmable Logic Array) which performs stable circuit operation. The race problem which nay occur in a NOR-NOR implementation of PLA is free in the proposed dynamic CMOS PLA by delaying time between the clocks to the AND- and to the OR-planes. The delay element has the same structure as the product line of the longest delay in the AND p`ane. Therefore it is unnecessary to design the delay element or to calculate correct delay time. The correct delay generated by the delay element makes the dynamic CMOS PLA to perform correct and stable circuit operation. Theproposed dynamic CMOS PLA has few variation of switching delay with the increasing number of inputs or outputs in PLA. It is verified by SPICE circuit simulation that the proposed dynamic CMOS PLA has the better performance over existing dynamic CMOS PLA's.

• ETRI Journal
• /
• 제28권3호
• /
• pp.320-328
• /
• 2006

Using biometrics to verify a person's identity has several advantages over the present practice of personal identification numbers (PINs) and passwords. To gain maximum security in a verification system using biometrics, the computation of the verification as well as the storing of the biometric pattern has to take place in a smart card. However, there is an open issue of integrating biometrics into a smart card because of its limited resources (processing power and memory space). In this paper, we propose a speaker verification algorithm using a support vector machine (SVM) with a very few features, and implemented it on a 32-bit smart card. The proposed algorithm can reduce the required memory space by a factor of more than 100 and can be executed in real-time. Also, we propose a hardware design for the algorithm on a field-programmable gate array (FPGA)-based platform. Based on the experimental results, our SVM solution can provide superior performance over typical speaker verification solutions. Furthermore, our FPGA-based solution can achieve a speed-up of 50 times over a software-based solution.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.742-750
• /
• 2018

본 논문에서는 $0.13{\mu}m$ BCD 공정 기반에서 5V MOS 소자만 사용하여 zero layer FTP 셀이 가능하도록 하기 위해 tunnel oxide 두께를 기존의 $82{\AA}$에서 5V MOS 소자의 gate oxide 두께인 $125{\AA}$을 그대로 사용하였고, 기존의 DNW은 BCD 공정에서 default로 사용하는 HDNW layer를 사용하였다. 그래서 제안된 zero layer FTP 셀은 tunnel oxide와 DNW 마스크의 추가가 필요 없도록 하였다. 그리고 메모리 IP 설계 관점에서는 designer memory 영역과 user memory 영역으로 나누는 dual memory 구조 대신 PMIC 칩의 아날로그 회로의 트리밍에만 사용하는 single memory 구조를 사용하였다. 또한 BGR(Bandgap Reference Voltage) 발생회로의 start-up 회로는 1.8V~5.5V의 전압 영역에서 동작하도록 설계하였다. 한편 64비트 FTP 메모리 IP가 power-on 되면 internal reset 신호에 의해 initial read data를 00H를 유지하도록 설계하였다. $0.13{\mu}m$ Magnachip 반도체 BCD 공정을 이용하여 설계된 64비트 FTP IP의 레이아웃 사이즈는 $485.21{\mu}m{\times}440.665{\mu}m$($=0.214mm^2$)이다.