• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.123-130
• /
• 2018

This paper provided the information related to the removal of 2,4,6-tribromophenol using in-situ and stable liquid ferrates(VI). This research's goal was to observe the differences of oxidation power between in-situ liquid ferrate(VI) and stable liquid ferrate(VI). The in-situ liquid ferrate(VI) ($FeO_4{^{2-}}$) has been successfully produced with the concentration 42,000 ppm (Fe) after 11 minutes of reaction time. The stable liquid ferrate(VI) was also successfully produced following the modification method by Sharma with the produced concentrations 7,000 ppm. The stable liquid ferrate(VI) was stable for 44 days and slightly decreased afterwards. This research has been carried out using 2,4,6-tribromophenol as the representative compound. Both of ferrates(VI) have the highest oxidation capability at the neutral condition. Furthermore, the stable liquid ferrate(VI) has higher oxidation power than the in-situ liquid ferrate(VI).

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.1
• /
• pp.27-37
• /
• 2021

Tetracycline is one of the most commonly used as antibiotics for the livestock industry and it is still widely used nowadays. Tetracycline and its metabolites are excreted with excrement, which is difficult to completely removed with conventional sewage treatment, therefore it is apprehended that the tetracycline-resistant bacteria occurs. In this study, the oxidant named ferrate(VI) was used to degrade the tetracycline and investigate the reaction between ferrate(VI) and tetracycline under various aqueous conditions. The highest degradation efficiency of tetracycline occurred in basic condition (pH 10.1 ± 0.1) because of the pKa values of tetracycline and ferrate(VI). The results also showed the effect of water temperature on the degradation of tetracycline was not significant. In addition, the dosage of ferrate(VI) was higher, the degradation of tetracycline and the self-degradation of ferrate(VI) also higher, finally the efficiency of ferrate(VI) was lower. The results said that the various mechanisms effects the reaction of ferrate(VI) oxidation, it required the consideration of the characteristics of the target compound for optimal degradation efficiency. Additionally, intermediate products were detected with LC/MS/MS and three degradation pathways were proposed.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.453-461
• /
• 2012

The degradation characteristics of TCE by Ferrate(VI) oxidation have been studied. Ferrate(VI) were prepared by electrochemical method. The degradation efficiency of TCE in aqueous solution was investigated at various pH values, Ferrate(VI) doses and aqueous solution temperature values. GC-ECD was used to analyze TCE. TCE was degraded rapidly by ferrate(VI) in aqueous solution, Also, the experimental results showed that TCE removal efficiency increased with the increase of Ferrate(VI) doses. The effect of pH was investigated and the maximum degradation efficiency was obtained at pH 7. And intermediate products were identified by GC-MS techniques. Ethyl Chloride, Dichloroethylene, Chloroform, 1,1-dichloropropene, Trichloroacetic acid and Trichloroethane were identified as a reaction intermediate, and $Cl^-$ was identified as an end product.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.643-649
• /
• 2011

Degradation of benzothiophene(BT) in the aqueous phase by potassium ferrate(VI) was investigated. Potassium ferrate(VI) was prepared by the wet oxidation method. The degradation efficiency of BT was measured at various values of pH, ferrate(VI) dosage and initial concentration of BT. BT was degraded rapidly within 30 seconds by ferrate(VI). While the highest degradation efficiency was achieved at pH 5, the lowest degradation efficiency was achieved at pH 9. Also, the initial rate constant of BT increased with decreasing of the BT initial concentration. In addition, the intermediate analysis for the reaction of BT and ferrate(VI) has been conducted using GC-MS. Benzene, styrene, benzaldehyde, formaldehyde, benzoic acid, formic acid, and acetic acid were identified as reaction intermediates, and ${SO_4}^{2-}$ was identified as an end product.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1337-1344
• /
• 2007

In this research, we synthesized potassium ferrate(VI) acting as an oxidant, disinfectant, and coagulant, and used it to treat natural organic matter(NOM, HA and FA) in river water. The removal efficiencies obtained by $UV_{254}$ ranged from 20.7 to 73.6% for 10 mg/L HA and from 52.6 to 77.5% for 10 mg/L FA in Nakdong river sample as the ferrate dose varied from 2 to 46 mg/L(as Fe). However, the removal efficiencies by TOC analysis ranged from 0 to 20.3% for HA and from 0 to 26.6% for FA at the same ferrate doses. The removal efficiencies of NOM increased either with decreasing pH or with increasing temperature. The removal efficiency of HA by ferrate was comparable to those by traditional coagulants such as $Al_2(SO_4)_3{\cdot}18H_2O$, $FeSO_4{\cdot}7H_2O$, and FeO(OH). The reaction between ferrate and HA reached a steady state within 60 seconds, showing first-order with respect to the reaction time. The removal efficiencies of HA by traditional coagulants were improved by pretreatment of HA using a small amount of ferrate.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.1
• /
• pp.27-35
• /
• 2018

The stability of liquid ferrate(VI) produced by an innovative method was confirmed and the degradation characteristics of cyclic compounds(Benzene, Aniline, Toluene, 1,4-Dioxane) by liquid ferrate(VI) were investigated under the same reaction conditions. When it was compared with the ferrate manufactured by the wet oxidation method, the liquid ferrate was more stable. And the stability of liquid ferrate was tested at the storage temperature. As a result, only 17.7% of liquid ferrate(VI) has decomposed at the storage temperature($4^{\circ}C$) for 28 days. Among the cyclic compounds, the aniline was rapidly degraded compare to other cyclic compounds, which seems to be due to the electron-donating ability of the substituent, $-NH_2$ group. Especially, when 1,4-dioxane was compared with benzene, the decomposition rate of 1,4-dioxane was lower than that of benzene, suggesting that oxygen atoms hinder the electrophilic reaction. Among 4 cyclic compounds, it was observed that aniline has the highest rate constant than those of other cyclic compounds.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.258-271
• /
• 2022

Ferrate (VI) [Fe(VI)] has multi-functional features, which include potential oxidant, coagulant, and disinfectant. Because of these distinctive properties, numerous studies on the synthesis of ferrate (VI) and its possible applications in a wide research areas have been investigated. This review highlights the recent development made on different synthesis methods for ferrate including wet chemical, electrochemical, and thermal methods. The recent advancements achieved in ferrate (VI) oxidation and the synergistic effect of the oxidative properties of ferrate (VI) in the presence of various compounds or materials are also included. Moreover, this review discusses the applications of ferrate (VI) for degrading various types of water pollutants and its reaction mechanism. The optimized experimental conditions and interaction mechanisms of ferrate (VI) with micro-pollutants, dyes, and other organic compounds are also elaborated upon to provide greater insight for future studies. Lastly, the limitations and prospects of the ferrate use in the treatment of polluted water are described.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.705-711
• /
• 2015

Degradation of 2,6-Dichlorophenol (DCP) using liquid ferrate(VI) synthesized by wet oxidation method has been studied. Several parameters such as pH (acid, base and neutral), DCP initial concentration, ferrate dosage, and temperature have been examined to determine the optimal experimental conditions. The ferrate(VI) has useful properties such as strong oxidizing power and selectivity and generates a non-toxic end product, Fe(III). Ferrate ion reduced rapidly to Fe(III) and oxygen in acidic and neutral conditions. The experimental results showed the higher DCP degradation efficiency in the neutral condition than in the acidic and basic conditions. The oxidation of DCP strongly depended on the dosage of ferrate added to the reactor and DCP initial concentration. With increasing of ferrate dosage the degradation efficiency of DCP increased, while the degradation efficiency of DCP decreased with increasing of DCP initial concentration. The effect of temperature has been tested at 4 different levels (10, 25, 35, and $50^{\circ}C$). The optimal temperature was obtained in $25^{\circ}C$ and degradation efficiency decreased as the temperature increased in the range from $25^{\circ}C$ to $50^{\circ}C$. The DCP degradation pathways were studied and proposed based on the intermediate products identified by GC/MS analysis.

• Clean Technology
• /
• v.27 no.2
• /
• pp.168-173
• /
• 2021

The treatment of plated wastewater is subject to various and complex processes depending on the pH, heavy metal, and cyanide content of the wastewater. Alkali chlorine treatment using NaOCl is commonly used for cyanide treatment. However, if ammonia and cyanide are present simultaneously, NaOCl is consumed excessively to treat ammonia. To solve this problem, this study investigated 1) the consumption of NaOCl according to ammonia concentration in the alkaline chlorine method and 2) whether ferrate (VI) could selectively treat the cyanide. Experiments using simulated wastewater showed that the higher the ammonia concentration, the lower the cyanide removal rate, and the linear increase in NaOCl consumption according to the ammonia concentration. Removal of cyanide using ferrate (VI) confirmed the removal of cyanide regardless of ammonia concentration. Moreover, the removal rate of ammonia was low, so it was confirmed that the ferrate (VI) selectively eliminated the cyanide. The cyanide removal efficiency of ferrate (VI) was higher with lower pH and showed more than 99% regardless of the ferrate (VI) injection amount. The actual application to plated wastewater showed a high removal ratio of over 99% when the input mole ratio of ferrate (VI) and cyanide was 1:1, consistent with the molarity of the stoichiometry reaction method, which selectively removes cyanide from actual wastewater containing ammonia and other pollutants like the result of simulated wastewater.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.226-226
• /
• 2021

Tetractycline은 sulfonamides, penicilines 등과 함께 축산계에서 널리 사용되는 대표적인 항생물질의 한 종류이다. 2011년 사료 내 항생제 투여를 금지한 이후 자가치료 및 예방용으로 사용되고 있으며, 가축의 체내로 투여되는 tetracycline는 주로 분뇨에 포함되어 배출되는데, 강우 등 물 순환에 따라 지표수 및 지하수로 이동하여 미생물에 독성을 일으키거나 내성균이 발생하기도 한다. Tetracycline 등의 항생물질 처리 방식으로 흡착 등 다양한 공정이 제시되고 있다. 본 연구에서는 산화제 중 하나인 ferrate(VI)를 이용하여 tetracycline 분해실험을 수행하였다. ferrate(VI)는 염소산화물 및 H₂O₂에 비해 비교적 강한 산화력을 가지며, 처리 후 발생되는 철염(Fe³⁺)은 독성이 없다는 장점이 있다. Ferrate(VI)는 병원균 제거 등에 효과적인 것으로 알려져 있으며, 다양한 난분해성 물질과 항생물질을 성공적으로 분해하여 그 효과를 입증한 바 있다. 본 연구에서는 자체적으로 제조한 potassium ferrate(VI)를 이용하여 다양한 수중 환경에서 tetracycline를 분해하고, 분해특성 및 중간생성물 연구를 수행하였다. Ferrate(VI)는 염기성 환경에서 tetracycline 분해효율이 가장 높은 것으로 나타났으며, 이는 pH에 따른 tetracycline과 ferrate(VI)의 이온화가 가장 큰 원인인 것으로 판단된다. 특히 ferrate(VI)는 pH가 낮을수록 쉽게 환원되는 특징이 있으며, 염기성으로 갈수록 안정화하여 오래 잔류하므로 이러한 결과가 나타난 것으로 판단된다. 중간생성물 조사 결과, ferrate(VI)와 tetracycline 사이의 분해 메커니즘은 주로 OH 라디칼로 인한 것이 대부분이며, hydroxylation과 amino group에서의 demethylation의 형태로 발생하였다. 이후 추가적인 반응으로 benzene ring이 깨지면서 결과적으로 CO₂ 및 H₂O 등으로 무기물화 되는 것으로 판단된다.