• Journal of Communications and Networks
• /
• 제17권5호
• /
• pp.463-472
• /
• 2015

This paper considers a limited feedback system for two-way wireless relaying channels with physical network coding (PNC). For full feedback systems, the optimal structure with the PNC has already been studied where a modulo operation is employed. In this case, phase and power of two end node channels are adjusted to maximize the minimum distance. Based on this result, we design new quantization methods for the phase and the power in the limited feedback system. By investigating the minimum distance of the received constellation, we present a code-book design to maximize the worst minimum distance. Especially, for quantization of the power for 16-QAM, a new power quantization scheme is proposed to maximize the performance. Also, utilizing the characteristics of the minimum distance observed in our codebook design, we present a power allocation method which does not require any feedback information. Simulation results confirm that our proposed scheme outperforms conventional systems with reduced complexity.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.253-262
• /
• 2003

In this paper, the interference cancellation system, which is used to cancel the feedback signal in the wireless communication system with the same frequency, is studied. The time varying feedback signal generated from transmitter antenna to receiver antenna reduces the performance of the receiver system. the interference cancellation system using adaptive feedback method(AF-ICS) is suggested to prevent the oscillation of the receiver system and maintain the maximum output power of the power amplifier by the reduction of time-varying feedback signal and also this paper conforms that the oscillation disappears from the output signal by cancellation of the feedback signal and the total output power is satisfied the system specification.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.248-251
• /
• 1996

In this paper, we presented WT(wavelet transform) domain feedback canceller in hearing aids system. Most transform methods produce blocking effect and this effect degrades the performance of feedback canceller and overall hearing aids system. As a solution we proposed WT based feedback canceller. The performance of this new approach was compared with LOT (lapped orthogonal transform) based method in the frequency domain. As a result, WT based feedback canceller has not shown the blocking effect and improved convergence rate as compared with the LOT based feedback canceller.

• 대한전자공학회논문지SD
• /
• 제39권5호
• /
• pp.74-86
• /
• 2002

본 논문은 결정 궤환 구조를 갖는 차동 위상 검출기의 고속 데이터 처리를 위한 VLSI 구조를 제안한다. 기존 차동 위상 검출 방식의 낮은 BER 성능을 극복하기 위해 DF-DPD, DPD-RGPR, DFDPD-SA 등의 다중 심볼 검출 방식이 제시되었다. 이러한 검출 방식들은 참조 위상으로 사용되는 이전 심볼에서의 잡음 효과를 작게 하기 위하여 검출된 위상을 궤환시키는 구조를 갖고 있다. 하지만, 검출된 위상을 궤환시키는 작용은 데이터 처리 속도를 기존의 차동 위상 검출기보다 느리게 한다. 본 논문에서는 결정 궤환 구조를 갖는 차동 위상 검출기가 기존의 차동 위상 검출 방식처럼 고속으로 데이터를 처리할 수 있는 VLSI 구조를 제안하였다. 제안된 구조는 'M-1' 번째 과정에서 'M' 번째 과정을 미리 계산하는 선계산(pre-calculation) 방식과 'M-1'번째 과정에서 예견 위상들을 궤환시키는 선결정 궤환(pre-decision feedback) 방식을 갖는다. 본 논문에서 제안된 구조는 VHDL(Very-high-speed-IC Hardware Description Language)를 사용하여 RTL(Register Transfer Level)로 구현되었다. 시뮬레이션 결과, 제안된 구조는 고속으로 데이터를 처리함을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.57-64
• /
• 2000

Recent advances in the field of control theory have enabled us to design active vibration control systems for various structures. In many studies, the controller used to suppress vibration has been synthesized for the given mathematical model of structure. In these cases, the designer has not been able to utilize the degree of freedom to adjust the structural parameters of the control object. To overcome this problem, so called 'Structure/Control Simultaneous Optimization Method' is used. In this context of view, this paper is concerned with the active vibration control of bridge towers, platforms and ocean vehicles etc. Simultaneous design method is used to achieve optimal system performance. Here, a general framework for the simultaneous design problem of output feedback case is introduced based on LMI (Linear Matrix Inequality). The simulation results show that the proposed design method achieves desirable control performance.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.145-148
• /
• 2015

In this letter, we present a new linearization method for a voltage controlled oscillator (VCO)-based quantizer in an analog-to-digital converter (ADC). The nonlinearity of the VCO generates unwanted harmonic spurs and reduces the signal-to-noise and distortion ratio (SNDR) of the VCO-based quantizer. This letter suggests a frequency-to-current feedback method to effectively suppress harmonic distortion. The proposed method decreases the harmonic spurs by more than 53 dB. And a VCO-based quantizer employing the proposed linearization method achieves a high SNDR of 74.1 dB.

• 한국지능시스템학회논문지
• /
• 제12권6호
• /
• pp.554-558
• /
• 2002

In this paper, we propose a robust indirect adaptive fuzzy state feedback regulator based on Takagi-Sugeno fuzzy model. The proposed adaptive fuzzy regulator is less sensitive to singularity than the conventional one based on the feedback linearization method. Furthermore, the proposed control method is applicable to not only plants with a perfect model but also plants with an imperfect model, which causes uncertainties. We verify the global stability of the proposed method by using Lyapunov method. In order to support the achievement, the application of the proposed adaptive fuzzy regulator to the control of a nonlinear system under the external disturbance is presented and the performance was verified by some simulation result.

• 전력전자학회논문지
• /
• 제23권4호
• /
• pp.281-285
• /
• 2018

An isolated feedback method for measuring the inverter DC-link voltage is proposed. This method provides a simple and economical solution to inverter control systems that use a flyback converter as a controller power supply. In the proposed method, data on the DC-link voltage are acquired when the primary side voltage appears on the secondary side of the flyback transformer, thereby eliminating the need to adopt an extra signal isolation method. To solve the non-synchronization problem between the flyback converter switching and main controller sampling, the external interrupt function of the micro-controller is used as a trigger signal for the A/D conversion.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1471-1474
• /
• 2002

In this paper, we propose a robust indirect adaptive fuzzy state feedback regulator based on Takagi-Sugeno fuzzy model. The proposed adaptive fuzzy regulator is less sensitive to singularity than the conventional one based on the feedback linearization method. Furthermore, the proposed control method is applicable to not only plants with a perfect model but also plants with an imperfect model, which causes uncertainties. We verify the global stability of the proposed method by using Lyapunov method. In order to support the achievement, the application of the proposed adaptive fuzzy regulator to the control of a nonlinear system under the external disturbance is presented and the performance was verified by some simulation result.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권9호
• /
• pp.572-577
• /
• 2017

가상화 기술은 물리머신의 자원을 다수의 가상머신이 공유하여 유휴 자원을 활용할 수 있도록 한다. 가상화 기술의 핵심은 가상머신 간의 효율적인 자원 분배에 있다. 그러나 현재의 가상화 환경에서는 가상머신에서 수행되는 작업의 특성을 파악할 수 없기 때문에 효율적인 자원 분배가 어렵다. 비효율적인 자원 분배는 가상머신 간의 성능 간섭을 발생시켜 가상머신의 성능 저하를 야기한다. 가상머신 간 성능 간섭 현상을 해결하기 위해 다양한 연구들이 진행되었다. 본 논문은 가상머신 성능 간섭 현상 해결을 위한 대표적인 방법인 피드백 제어를 활용하여 I/O 성능을 보장하는 CPU 스케줄링 기법을 소개하고, 특히 모델기반 피드백 제어 방식과 동적 피드백 제어 방식을 비교 분석한다.