• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.261-266
• /
• 2012

Fermented Chlorella vulgaris CBT$^{(R)}$ was evaluated for its effects on egg production, egg quality, liver lipids and intestinal microflora in laying hens. One hundred and eight Hy-line Brown layers (n = 108), 80 wk of age, were fed a basal diet supplemented with CBT$^{(R)}$ at the level of 0, 1,000 or 2,000 mg/kg, respectively for 42 d. Egg production was measured daily and egg quality was measured every two weeks. Five eggs from each replicate were collected randomly to determine egg quality. Egg production increased linearly with increasing levels of CBT$^{(R)}$ supplementation (p<0.05), although there was no significant effect of treatment on feed intake. Egg yolk color (p<0.001) and Haugh unit (p<0.01) improved linearly with increasing dietary CBT$^{(R)}$. Hepatic triacylglycerol level was linearly decreased with increasing dietary CBT$^{(R)}$ (p<0.05). The supplemental CBT$^{(R)}$ resulted in linear (p<0.001) and quadratic (p<0.01) response in population of cecal lactic acid bacteria. In conclusion, fermented Chlorella vulgaris supplemented to laying hen diets improved egg production, egg yolk color, Haugh unit and positively affected the contents of hepatic triacylglycerol and the profiles of cecal microflora.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.61-62
• /
• 2018

In this paper, we studied a wideband double-sided dipole antenna operating at 3.5 GHz (WiMAX) band. The each printed dipoles are placed on the both sides of the substrate. It can be easily implemented and is suitable for connection with an active circuit. In order to obtain wideband printed dipole characteristics, thick rectangular shaped dipole is adopted. Feeding Circuit for dipole array and balun were designed for impedance matching with a $50{\Omega}$ microstrip feed line. The antenna is designed by simulation for an operation in the frequency range of 3.4~3.7 GHz Simulation results show that the maximum gain in the 3.5 GHz band is 5.5 dBi and the bandwidth with VSWR less than 2 is about 1 GHz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.40-48
• /
• 2008

The Waimea Basin is located on the northern tip of the South Island of New Zealand. It is a highly productive area with intense water use with multi-stakeholder interest in water. Irrigation from the underground aquifers here makes up the largest portion of used water; however the same aquifers are also the key urban and industrial sources of water. The Waimea/Wairoa Rivers are the main sources of recharge to the underlying aquifers and also feed the costal springs that highly valued by the community and iwi. Due to the location of the main rivers and springs close to the urban centre the water resource system here has high community and aesthetic values. Recent enhanced hydrological modelling work has shown the water resources in this area to be over allocated by 22% for a 1:10 year drought security for maintaining a minimalistic flow of 250 l/s in the lower Waimea River. The current irrigated land area is about 3700 hectares with an additional potential for irrigation of 1500 hectares. Further pressures are also coming on-line with significant population growth in the region. Recent droughts have resulted in significant water use cutbacks and the threat of seawater intrusion in the coastal margins. The Waimea Water Augmentation Committee (WWAC) initiated a three year stage 1 feasibility study in 2004/2005 into the viability of water storage in the upper parts of the catchment for enhancing water availability and its security of supply for consumptive, environmental, community and aesthetic benefits downstream. The project also sought to future proof water supply needs for the Waimea Plains and the surrounding areas for a 50 - 100 year planning horizon. The broad range stage 1 investigation programme has identified the Upper Lee Catchment as being suitable for a storage structure to provide the needs identified and also a possibility for some small scale hydro electricity generation as well. The stage 2 detailed feasibility investigations that are underway now (2007/2008), and to be completed in two years is to provide all details for progressing with the next stage of obtaining necessary permits for construction and commissioning a suitable dam.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.98-104
• /
• 2007

In this paper, the dual-band open loop antenna using a strip conductor for the RFID reader and Wireless LAN Application, which has a resonant frequency at 910MHz and 2.45 GHz, is proposed. Input impedance of antenna is matched with the feed line of 50 ohm by varying the length and width of sip conductor making up the antenna. The gain and directivity of antenna is enhanced as tuning the length of strip, and as also grooving the teeth shapes on the strip conductor. The size of fabricated antenna is $75mm\times100mm$. The return loss and the gain of fabricated antenna are -11.92 dB, 3.02 dBi at 910 MHz and -21.31 dB, 4.08 dBi at 2.45 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.231-236
• /
• 2008

A method of moments model for the resistive vee dipole has been established. In order to validate the numerical model, an experimental model is built and reflections from the antenna in the feed line are measured. The measured data and the numerical data agree closely validating the numerical model. Based on the numerical model, efficiency of the antenna and the power dissipated in the resistors are analyzed. The results show that the antenna has low radiation efficiency because of the loading resistors and that the resistors near the drive point of the antenna dissipate more power than do the resisters far from the drive point. The results can be used to determine the amount of power that can be accepted by the resistive vee dipole, to determine the power rating of the loading resistors for a desired application, or to estimate the operation range of the antenna.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.324-330
• /
• 2013

This paper describes a novel method to surface large optics mirror with an extremely high hardness, which could replace the high cost of the repetitive off-line measurement steps and the large ultra-precision grinding machine with ultra-positioning control of 10 nm resolution. A lot of diamond pellet to be attached on the convex aluminum base consists of a grinding tool for the concave large mirror, and the tool was pressured down on the large mirror blank. The tool motion at an interval on the spiral path was controlled with each feed rate as the dwell time in the conventional computer-controlled polishing. The shape to be surfaced was measured directly by a touch probe on the machine without any separation of the mirror blank. Total 40 iterative steps of the surfacing and measurement could demonstrate the form error of RMS $7.8{\mu}m$, surface roughness of Ra $0.2{\mu}m$ for the mirror blank with diameter of 1 m and spherical radius of curvature of 5400 mm.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.859-867
• /
• 2014

This study was conducted to evaluate the optimum dietary lipid level in juvenile river puffer. Five semi-purified diets were formulated with corn oil to contain graded levels of lipid levels of 6, 9, 12, 15 and 18%. Fish averaging $8.32{\pm}0.02$ g randomly were fed the experimental diets in triplicate groups for 8 weeks. After the 8-weeks feeding trial, weight gain and specific growth rate of fish fed the 9% diet were significantly higher than those of fish fed the 15 and 18% diets (P<0.05) but there was not significantly different from that of fish fed the 6, 9 and 12% diets. Feed efficiency and protein efficiency ratio of fish fed the 6, 9 and 12% diets were significantly higher than those of fish fed the 18% diet (P<0.05). Visceralsomatic index of fish fed 18% diet was significantly higher than that of fish fed the 6% diet (P <0.05) but there was not significantly different from that of fish fed the 9, 12, 15 and 18% diets. No significant differences were observed in condition factor, hepatosomatic index and whole body composition among all the fish groups. Serum cholesterol and triglyceride fish fed of 18% diet were significantly higher than that of fish fed the other diets (P<0.05). Optimum dietary lipid levels by using broken-line model and by using second order polynomial were estimated at 7.01% and 8.98% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary lipid level could be greater than 7.01% but less than 8.98% for the maximum growth in juvenile river puffer.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.915-922
• /
• 2014

This study was conducted to evaluate the optimum dietary protein level in juvenile river puffer. Five semi-purified diets were formulated by using casein to contain graded levels of protein levels of 35, 45, 50, 55 and 65%. Fish averaging $8.56{\pm}0.04g$ were randomly assigned to one of five experimental diets in triplicate groups for 8 weeks. After the 8-weeks of feeding trial, weight gain and feed efficiency of fish fed 45, 50 and 55% diets were significantly higher than those of fish fed 35 and 65% diets (P<0.05). Protein efficiency ratio of fish fed the 35% diet was significantly higher than those of fish fed 65% diet (P<0.05), but there were no significant difference among those of fish fed 45, 50 and 55% diets. Specific growth rate of fish fed 50% diet was significantly higher than those of fish fed 35 and 65% diets (P<0.05), but there was no significant difference among those of fish fed 45, 50 and 55% diets. No significant differences were observed in condition factor, hepatosomatic index, visceralsomatic index and survival among those of fish fed all the diets. Optimum dietary protein levels by using broken-line model and by using second order polynomial were estimated at 45.9% and 51.6% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary protein level could be greater than 45.9% but less than 51.6% for the maximum growth in juvenile river puffer.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.