• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.103-106
• /
• 2008

A broiler experiment was conducted to compare the effects of supplementary iron sources and levels on the iron content of broiler meat. Two hundred and fifty hatched Ross broiler chickens were randomly assigned to 5 dietary treatments. Each treatment had 5 replicates of 10 birds (5 males and 5 females). Birds were housed in raised floor batteries and fed traditional broiler diets ad libitum for 5 weeks. Dietary treatments were as follows: Control, Fe-Met 100 (100 ppm iron as Fe-methionine), Fe-Met 200, $FeSO_4$ 100 (100 ppm iron as $FeSO_4{\cdot}7H_2O$) and $FeSO_4\;200$. There were no significant differences among treatments in parameters related to production performance. Liver contained approximately 10 times more iron than the leg muscle which contained approximately 3 times more iron than either breast muscle or wing muscle. Significant differences in iron content in the broiler meat were observed. In the breast meat, Fe-Met treatments were significantly (p<0.05) higher than other treatments in iron content. In the leg meat, Fe-Met treatments and $FeSO_4\;200$ treatment were significantly higher than the control in iron content. In the wing muscle, Fe-Met 200 treatment was significantly higher than other treatments in iron content. Iron content in the liver was significantly influenced by source and supplementation level of iron. Fe-Met treatments were higher than $FeSO_4$ treatments and 200 ppm treatments were higher than 100 ppm treatments in iron content in the liver. It is concluded that iron-methionine chelate is more efficient than iron sulfate and 200 ppm iron supplementation as Fe-Met is recommended for maximum iron enrichment in broiler meat.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.2
• /
• pp.76-81
• /
• 2006

Molecular dynamics simulations were carried out to investigate physical sputtering of Fe(100) substrate due to energetic ion bombardments. Repulsive interatomic potentials at short internuclear distances were determined with ab initio calculations using the density functional theory. Bohr potentials were fitted to the ab initio results on diatomic pairs (Ar-Fe, Fe-Fe) and used as repulsive screened Coulombic potentials in sputtering simulations. The fitted-Bohr potentials improve the accuracy of the sputtering yields predicted by molecular dynamics for sputtering of Fe(100), whereas Moliere and ZBL potentials were found to be too repulsive and gave relatively high sputtering yields. In spite of assumptions and limitations in this simulation work, the sputtering yields predicted by the molecular dynamics method were in fairly good accordance with the obtainable experimental data in absolute values as well as in manner of the variation according to the Incident energy. Threshold energy for sputtering of Fe(100) substrate was found to be about 40 eV. Additionally, distributions of kinetic energies of sputtered atoms and their original depths could be obtained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1043-1048
• /
• 2010

This study investigated the effects of Fe-soy proteinate (Fe-SP) and magnesium oxide (MgO) dietary supplements on eggshell quality in laying hens. A total of 800 26-wk-old Hy-Line Brown hens were assigned to four dietary treatments: control (C), Fe-SP 100 (100 ppm Fe-soy proteinate), MgO (3 g MgO/kg diet), and Fe-SP 100+MgO. Each treatment had five replicates of 40 hens. The FT-IR (Fourier transform infrared) and XRD (X-ray diffraction) spectra of Fe-soy proteinate were different from those of $FeSO_4$ and soy digest. There were no significant differences among treatments in hen-day egg production, hen-house egg production, broken and soft egg rate, feed intake, or feed conversion. The MgO and Fe-SP 100+MgO treatments showed significantly (p<0.05) higher egg weights than the control group. Eggshell strength and thickness were significantly (p<0.05) higher in the MgO supplemented groups. The lightness and yellowness of the eggshells decreased, and the redness increased significantly in the Fe-SP treated groups. There were no significant differences among treatments in leukocyte level, but hemoglobin (Hb) concentrations were higher with Fe-SP treatments. In conclusion, supplementation with Fe-SP significantly affects eggshell color and hemoglobin concentration, whereas MgO supplementation increases eggshell strength and thickness. Egg weight and egg shell quality can be improved by supplementation of 100 ppm Fe in the form of Fe-SP and 3 g MgO/kg diet.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50. 75/25, and $100/0\%$ in the Fe/Cu(trial-1). Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ for main element and $10\%$ for other 3 elements, respectively. 1. The contents of N-compounds in forages tended to be in inverse proportion to the yields. In the Mn/Zn trial, the 0/l00 to white clover resulted in the relatively high contents of soluble N-compounds and low ratio of pure protein/soluble N-compounds in company with a severe yield decrease. 2. In the Fe+Cu/Mn+Zn trial, the 0/100 and 100/0 resulted in the somewhat high contents of N-compounds in white clover. It was likely to be caused by the concentration effect derived from yield decrease. In addition, the 100/0 resulted in the relatively high content of soluble N-compounds and low ratio of pure protein/soluble N-compounds. The protein synthesis in white clover was likely to be negatively influenced by the 100/0. 3. In the Fe/Mn/Cu/Zn trial, white clover showed the low contents of crude and pure protein at the 1st cut. It was likely to be caused by the unbalanced mutual ratios derived from the high application levels of each single element. 4. In white clover at the 5th cut, the 0/100 of Mn/Zn and 100/0 of Fe+Cu/Mn+Zn resulted in the relatively high content of K. It was likely to be caused by the concentration effect derived from yield decrease.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.140-145
• /
• 2005

The desulfurization abilities using GC/microreactor have been examined for $CuO-Fe_2O_3$ sorbents with respect to calcination temperatures of 700, 900 and $1,100^{\circ}C$. CuO was used as a main active component, $Fe_2O_3$ was used as an additive one and 25 wt% $SiO_2$ was used as a support. The desulfurization reaction temperature was $500^{\circ}C$ and the regeneration reaction temperature was $700^{\circ}C$. From the XRD results, the $CuFeO_2$ compound has been observed for the fresh sorbent calcined at $1,100^{\circ}C$ and the $CuFeS_2$ compound for the reacted sorbent calcined at $1,100^{\circ}C$. By the BET results, however any significant differences among sorbents calcined at the three different temperatures of 700, 900 and $1,100^{\circ}C$ haven't been observed. Especially CFS1 (CuO : $Fe_2O_3$ : $SiO_2$=67.5 wt% : 7.5 wt% : 25 wt%) sorbent calcined at $1,100^{\circ}C$ maintained about 10 g sulfur/100 g sorbent for 100 cycles by the cyclic test.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.196-202
• /
• 2000

Top synthetic spin valves with structure Ta/NiFe/CoFe/Cu/CoFe(P1)/Ru/CoFe(P2)/FeMn/Ta on Si(100) substrate with natural oxide were prepared by dc magnetron sputtering system, and investigated on the magnetoresistance properties and effective exchange bias field. As the thickness of FeMn increased above 150 $\AA$, MR ratio was decreased due to the current shunting effect. As the thickness of free layer decreased below 40$\AA$, MR ratio was reduced rapidly. In case of 40 $\AA$ thick of free layer, spin valve film with a structure Si(100)/Ta(50 $\AA$)/NiFe(27 $\AA$)/CoFe(13 $\AA$)/Cu(26 $\AA$)/CoFe(30 $\AA$)/Ru(7 $\AA$)/CoFe(15 $\AA$)/FeMn(100 $\AA$)/Ta(50 $\AA$) exhibited maximum MR ratio of 7.5 % and an effective exchange bias field of 600 Oe, respectively. Thickness difference dependence in this synthetic spin valve structure on effective exchange field was investigated and interpreted by the analytical method. It should be noted that thickness increase of CoFe(P 1) and decrease of CoFe(P2) in synthetic antiferromagnet leaded to the decrease in effective exchange bias field by experimentally and analytically.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.193-200
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50, 75/25, and $100/0\%$ in the Fe/Cu(trial-1), Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively. The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ in main element and $10\%$ in other 3 elements, respectively. 1. By the systematic variations of Fe, Mn, Cu, and Zn, the yields were more significantly influenced in white clover than in orchardgrass. In addition, the yields of white clover were closely correlated to the trends of root/nodule growth and flowering. In the Fe/Cu trial, the relatively high yields were obtained at the $100/0\%$ in orchardgrass and at the $75/25\%$ in white clover. The yields of white clover were more negatively influenced by the 100/0(Cu control) than by the 0/100(Fe control). The yields of orchardgrass, however, tended to be opposite to the above trends. 2. In the Mn/Zn trial, both forages showed generally high yields at the high ratios of Mn/Zn. Compared with orchardgrass, the yields of white clover were greatly decreased by the Mn-deficiency(low ratio of Mn/Zn). The effects of Zn on forage yields, however, were not recognized. 3. In the Fe+Cu/Mn+Zn trial, the yields of orchardgrass tended to be slightly different among the treatments. The yields of white clover, however, were relatively' high at the 75/25, and showed a severe decrease at the 100/0 in the 2nd half cuts. In the Fe/Mn/Cu/Zn trial, the yields of white clover tended to be relatively high at the Cu and Zn treatments. It was likely to be caused by the balanced Fe/Mn ratio.

• Membrane Journal
• /
• v.23 no.6
• /
• pp.432-438
• /
• 2013

Mixed-matrix membranes (MMMs) containing MIL-100(Fe), a MOF type, were fabricated in this study. MMMs up to 30 wt% MOF loading were prepared, and their gas permeabilities were tested. $H_2$, $CO_2$, $O_2$, $N_2$, and $CH_4$ gas permeabilities increased with the MOF loading, while $SF_6$, the largest kinetic diameter in this study, exhibited reduction of gas permeability with the loading. Ideal gas selectivity of $N_2/SF_6$ improved by 40% as compared with pure polyimide membrane, suggesting the proposed MMMs were suitable for $N_2/SF_6$ separation.

• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.144-146
• /
• 2009

This study examined the structure and perpendicular magnetization of FePt films grown on Pt/Fe/MgO(100) buffered Si(100) substrates by molecular beam epitaxy. The [Fe(0.17nm)/Pt(0.2nm)]$_N$ multilayers were prepared at room temperature to form a $L1_0$-FePt phase after vacuum annealing. Perpendicular magnetic anisotropy (PMA) was observed in the films after at least 15 repetitions (N = 15) of Fe/Pt deposition and annealing at $300{^{\circ}C}$ for 1 hour. Careful structural analysis of the films was carried out by x-ray diffraction and high-resolution transmission electron microscopy. These results will assist in the development of the low temperature $L1_0$- FePt deposition process, which will be essential for future extremely high density magnetic recording media.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.455-459
• /
• 2023

Three different optimization studies were conducted for the synthesis of MIL-100(Fe) and MIL-100(Fe)@COF using design of experiments. In the first study, the optimal concentration of precursors was determined using a mixture design method, and a modified molar ratio of 0.4155:0.2664:0.3182 was found to yield the highest crystallinity. In the second study, a central composite design was used to optimize the main factors of synthesis temperature and time with a synthesis temperature of 161℃ and a synthesis time of 12 hours. In the third study, a screening design method was used to determine the effect of five precursors on the formation of MIL-100(Fe)@COF, and the presence of characteristic peaks at 1552, 1483, and 1354 cm^-1 was found to be important for the existence of the COF structure. MIL-100(Fe)@COF synthesized with a modified molar ratio of 0.4831:0.4169:0.1 was predicted to exhibit optimal conditions.