• 정보처리학회논문지A
• /
• 제16A권3호
• /
• pp.153-158
• /
• 2009

구조적 생물 정보학 분야는 단백질의 3차원 구조를 대상으로 단백질을 연구하는 분야이며, 구조적생물 정보학의 중요한 분야 중의 하나는 단백질 3차원 구조 가시화이다. 단백질의 3차원 구조를 규명하는 장비의 발달로, 규명되는 단백질의 크기와 개수가 증가함에 따라, 고성능의 단백질 가시화 시스템의 필요성도 크게 증가하였으나, 기존의 단백질 구조 가시화 시스템은 3차원 그래픽 하드웨어에 최적화 되지 못하여, 거대 단백질의 가시화에 충분한 성능을 가지지 못하였다. 본 논문에서 제안하는 단백질 3차원 구조 가시화 시스템은 거대 단백질의 가시화 하기 위하여, 3차원 그래픽 하드웨어의 최적화 기법중의 하나인 기하 인스턴싱 기법을 사용하여 빠르게 거대 단백질을 렌더링 한다. 성능 실험에서 7종의 다른 크기의 단백질을 대상으로, 4가지 가시화 방법에 대하여, 제안하는 시스템과 기존의 시스템과의 단백질 렌더링 성능 비교 실험을 하여, 대부분의 경우 우수한 성능을 보였다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.54-62
• /
• 2011

KAERI has developed a KALIMER-600 which is a pool-type sodium-cooled fast reactor with a 600MWe electric generation capacity. For a SFR development, one of the main topics is an enhancement of the reactor system safety. Therefore, we have a long-term plan to design the large sodium experimental facility to evaluate the reactor safety and component performance. In order to extrapolate a thermal hydraulic phenomena in a large sodium reactor, the thermal hydraulics phenomena is under investigation in a 1/$10^{th}$ water-simulant facility for the KALIMER-600. In this paper, we shortly described the experimental facility setup and the measurement of the isothermal global flow behavior. For the flow field measurement, the PIV method was used in a transparent Plexiglas reactor vessel model at around $20^{\circ}C$ water condition.

• 대한의용생체공학회:의공학회지
• /
• 제27권1호
• /
• pp.6-13
• /
• 2006

Ultrasound visualization is a typical diagnosis method to examine organs, soft tissues and fetus data. It is difficult to visualize ultrasound data because the quality of the data might be degraded by artifact and speckle noise, and gathered with non-linear sampling. Rendering speed is too slow since we can not use additional data structures or procedures in rendering stage. In this paper, we use several visualization methods for fast rendering of ultrasound data. First method, denoted as adaptive ray sampling, is to reduce the number of samples by adjusting sampling interval in empty space. Secondly, we use early ray termination scheme with sufficiently wide sampling interval and low threshold value of opacity during color compositing. Lastly, we use bilinear interpolation instead of trilinear interpolation for sampling in transparent region. We conclude that our method reduces the rendering time without loss of image quality in comparison to the conventional methods.

• 조명전기설비학회논문지
• /
• 제24권8호
• /
• pp.84-93
• /
• 2010

이 논문은 이산신호가 연속적으로 입력될 때, 이산신호에서 고속으로 파라미터를 추정하고, 그 결과를 시각화하는 방법에 대해서 기술하고 있다. 이 논문은 이산푸리에변환에서 직접 파라미터를 추정하는 고속파라미터 추정 알고리즘을 적용하여 연속신호에서 파라미터를 추정하고, 추정한 중요 파라미터들을 효율적으로 시각화하는 방법에 대해서 기술하고 있다. 이 논문에서 제안한 연속신호에 대한 저주파 파라미터 추정방법을 3개의 모드를 가진 시험함수에 적용하여 제안한 알고리즘과 시각화의 효율성을 검증하였다.

• 한국가시화정보학회지
• /
• 제8권2호
• /
• pp.16-22
• /
• 2010

A flow visualization has been conducted to investigate unsteady flight characteristics of a model of dragonfly. The mechanism of lift generation by flapping wings is analyzed using smoke-wire and high speed camera. The experimental results of flow visualization show a discernible sequential dynamics that three mechanisms and high incidence angle of the wings are responsible for the lift generation. The leading edge vortex by the rapid acceleration of leading edge of the wing during initial stage of stroke causes a strong lift enhancement. Delayed stall during the stroke, fast supination and pronation of the wing near the end of each stroke are also responsible for the lift generation.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.1-18
• /
• 2022

New Fabrication Facility (FAB) construction is performed with Building Information Modeling (BIM) based design. The BIM design data keep updated during the FAB construction. To improve fast-track construction management, a Fabrication Facility Augmented Reality (FABAR) was developed. This study introduces a FABAR system development process and shows performance evaluation results of the FABAR prototype system. The FABAR is implemented with three major modules: Augmented Reality (AR) visualization unit (Room-box) to transfer big BIM data to AR data, AR registration and tracking unit to match AR with real scape and to keep AR coordination in real, and AR data management unit to enhance usability. The prototype performance results were as follows: visualization of design BIM data via AR within 24 hours, precise AR registration and tracking registration, and appropriate usability to support FAB construction management at site. The results indicate that the FABAR is applicable for FAB construction management. Especially, the BIM data transformation method using Room-box in this study signifies a new construction management approach using fluctuating BIM design data in the fast track construction condition.

• 한국컴퓨터그래픽스학회논문지
• /
• 제22권4호
• /
• pp.21-30
• /
• 2016

위험관리 시스템은 단 시간에 의사결정하기 위해 스트림 데이터를 실시간으로 분석 할 수 있어야 한다. 많은 데이터 분석 시스템은 CPU와 디스크 데이터베이스로 구성되어 있다. 하지만, cpu 기반 시스템은 스트림 데이터를 실시간으로 분석하는데 어려움이 있다. 스트림 데이터는 1ms부터 1시간, 1일까지 생성주기가 다양하다. 한 개의 센서가 생성하는 데이터는 작다. 하지만 수 만개의 센서가 생성하는 데이터는 매우 크다. 예를 들어 10만개 센서가 1초에 1GB 데이터를 생성한다면, CPU 기반 시스템은 이를 분석 할 수 없다. 이러한 이유로 실시간 스트림 데이터 분석 시스템은 빠른 처리 속도와 확장성이 필요하다. 본 논문에서는 GPU와 하이브리드 데이터베이스를 이용한 시각화 가속 기술을 제안한다. 제안한 기술을 평가하기 위해 우리는 지하 파이프라인에 설치된 센서와 트윗 데이터를 활용하여 실시간 릭 탐지 시각적 분석 시스템에 적용했다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.63-68
• /
• 2011

The flow-field of a liquid-metal system is very important for the safety analysis and the design of the steam generator of liquid-metal fast breeder reactor. Dynamic neutron radiography (DNR) is suitable for a visualization and measurement of a liquid metal flow and a two-phase flow in a metallic duct. However, the three dimensional DNR techniques is not enough to obtain the velocity information in the wide channel up to now. In this research, a high speed DNR technique was applied to visualize the heavy liquid-metal flow field in the narrow channel with the HANARO-beam facility. The images were taken with a high frame-rate neutron radiography at 250 fps and analyzed with a Particle Image Velocimetry(PIV) method. The images were compared with the results of the commercial CFX code to study the feasibility of DNR technique for the measuring the heavy liquid-metal flow field. The PIV images could discern the turbulent vortex flow in the two-dimensional narrow channel.

• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.413-421
• /
• 2007

3D rendering is becoming a common feature of mobile application programs with the rapid advance of mobile devices. Since the existing rendering engines do not provide triangulation functions, mobile 3D programs have focused on an efficient handling with pre-tessellated geometry. In addition, triangulation is comparatively expensive in computation, so it seems that the triangulation cannot be easily implemented on mobile devices with limited resources. Triangulation of 3D geometry is the essential process of visualization of 3D model data and many different triangulation methods have been reported. We developed a light and fast visualization process that involves constrained triangulation based on Voronoi diagram and applied it to a mobile computer application. In this paper, we applied kd-tree to the original incremental construction algorithm and produced new O(nlogn) incremental construction algorithm. And we show a simple and efficient constrained triangulation method based on Voronoi diagram. This paper also describes an implementation of mobile STEP data viewer as an application of our proposed algorithms.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.90-97
• /
• 2002

The interaction between airflow and liquid phase LfG (Liquefied Petroleum Gas) sprays was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside intake port of LPG engines with liquid injection system. The spray developments in flowing fields with the mean velocities of 5.4, 21.5 and 42.4m/s were identified by spray visualization techniques such as Mie scattering and shadowgraph. The microscopic visualization using a telescopic lens system was performed to investigate the shape and size of liquid droplets in the spray. PDA measurement was used to get 1-dimensional velocity and diameter of liquid droplets. The fast co-flows make the spray field be compact and be lead upward to the injection direction. SMD of the spray was smaller at the fast flowing field. Spray width got bigger and SMD of the spray was smaller with higher injection pressure.