• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.548-556
• /
• 2005

Reliability evaluation of power distribution system is very important to both power utilities and customers. It present the probabilistic number and duration of interruption such as failure rate, SATDI, SAIFI, and CAIDI. However, it has a fatal weakness at reliability index because of accuracy of failure rate. In this paper, the Time-varying Failure Rate(TFR) of power distribution system equipment is extracted from the recorded failure data of KEPCO(Korea Electric Power Corporation) in Korea. For TFR extraction, it is used that the fault data accumulated by KEPCO during 10 years. The TFR is approximated to bathtub curve using the exponential(random failure) and Weibull(aging failure) distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Finally, Probability plot and regression analysis is applied. It is presented that the extracted TFR is more effective and useful than Mean Failure Rate(MfR) through the comparison between TFR and MFR

• 한국철도학회논문집
• /
• 제8권2호
• /
• pp.170-175
• /
• 2005

This study presents a prediction of a failure rate in a safety required system that consists of a embedded control system, requiring a satisfaction of a quantitative safety requirement. International Standards are employed to achieve a regular procedures in the whole life cycle of a system, for the purpose of a prediction and a evaluation of a fault that might be able to be happened in a system. This International Standards uses SIL (Safety Integrity Level) to evaluate a safety level of a system. SIL is divided into 4 levels, from level 1 to level 4, and each level has functional failure rate and dangerous failure rate of a system. In this paper we describe the conventional method to predict the dangerous failure rate and propose a method using hazard analysis to predict the dangerous failure rate. The conventional method and the technique using hazard analysis to predict the dangerous failure rate are made a comparison through the control modules of the interlocking system in KTX. The proposed method verify better effectiveness for the prediction of the dangerous failure rate than that of the conventional method.

• 산업기술연구
• /
• 제27권B호
• /
• pp.245-253
• /
• 2007

Failure rate serves as a pivotal role in reliability study. Of all, the constant failure rate is the most popularly used in field exercises. In reality, however, the electrical and electronic parts' life is represented by not only the constant failure rate but the decreasing and/or increasing failure rates. Explicit consideration and incorporation of them into the model development may yield more desirable results. In this study, we built a reliability model for failure rates varying over time intervals and derived well known measures such as probability density function, reliability function, mean life, moments, and mission time. We then evaluated mean life with consideration of the first-year multiplier and compared the results those with constant failure rate. The results given in the study may provide a reference applying for practical decision making.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.97-98
• /
• 2022

The purpose of this study is to find out the failure conditions of fire doors in the process of use and prepare maintenance measures against them and find out the failure conditions and failure rates of fire doors according to the period of use of buildings. According to a survey of the failure rate and failure factor of fire doors, the failure rate of fire doors under 5 years was 3.7%, 13.4% of fire doors under 5 years and 10 years, and 14.8% of fire doors under 15 years and 27.6% of fire doors over 20 years. In particular, 15 years later, the failure rate of fire doors exceeded 20%. The main defects were found to be natural aging, holes, opening and closing failures, gaps, and failure and wear of accessories such as gaskets and door closers.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.263-268
• /
• 2021

This paper statistically analyzes the time required for each failure cause and describes a diagnostic method for 159 reports of failure analysis of MV cables that occurred in the distribution system of KEPCO over the past 18 years. In addition, the manufacturer's failure rate compared to 100C-km was calculated using 381 cases of MV cable deterioration failure between 2008 and 2020. It is hoped that this paper will help those in charge of maintaining underground facilities at the business office to use the failure rate to prioritize facility diagnosis.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.14-20
• /
• 2009

본 논문에서는 배전 시스템을 구성하는 기기들에 대한 설치 현황자료와 고장 자료 및 전국 지점을 대상으로 한 설문조사 자료를 이용하여 기후별 고장률을 예측하였다. 같은 종류의 배전 설비라 하더라도 그 설비가 설치되어 있는 기후 상태에 따라서 고장률은 다르게 나타날 수 있다. 그러므로 배전기기의 고장률을 설비관리나 최적 투자 계획의 운용에 사용하기 위해서는 대상 설비가 설치된 기후 특성을 고려해야 하며 이를 위해 기후 특성을 고려한 고장률 예측이 요구된다고 할 수 있다. 기후특성분석을 위하여 한국전력공사의 전국지점을 대상으로 기후 특성(호우, 낙뢰, 강풍, 해일, 특징 없음)으로 구분하여 설문조사를 실시하였고 기후 특성에 따른 영향도를 분석하였고 고장률 추정 알고리즘을 제안하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권5호
• /
• pp.232-237
• /
• 2002

It is increased for methodology to evaluate distribution power system interruption cost in power supply zones under competitive electricity market. This paper presents algorithms to evaluate system interruption cost in distribution power supply zones taking into consideration failure rate of distribution facilities and composite customer interruption cost. In this paper, it is introduced for weighting factor for each customer failure duration and failure rate of distribution facilities to evaluate reasonable system interruption cost in distribution power supply area. Also, this Paper estimates evaluation results of system interruption cost using a sample model system. Finally, evaluation results of system interruption cost based on failure rate of distribution facilities and composite customer interruption cost are shown in detail.

• 산업경영시스템학회지
• /
• 제42권2호
• /
• pp.28-35
• /
• 2019

Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.15-20
• /
• 2022

본 연구는 소프트웨어 품질 특성인 기능적합성, 신뢰성, 사용성, 이식성, 유지보수성, 성능효율성, 보안성, 호환성 중에서 신뢰성에 대한 평가 방안을 연구하였다. 소프트웨어 품질 측정에 있어 신뢰성의 정량적 평가 방안을 제시한다. 본 연구는 소프트웨어 품질 특성 중 하나인 신뢰성 평가 중 성숙성에 포함되는 고장률을 측정하는 방법에 대해서 소개하고 고장 데이터의 형태에 따라 고장률이 어떻게 변화하는지에 대해 실험데이터를 가지고 연구한 내용이다. 소프트웨어 테스팅을 중심으로 매일의 고장 수를 중심으로 소프트웨어 신뢰성 성장 모델에 적용하여 고장률을 측정하여 고장 데이터의 형태에 따라 비교 분석하였다. 6일간의 테스트를 통해서 발견된 고장 시간을 중심으로 고장률을 측정하고 측정결과를 이용해서 국제표준 ISO/IEC 25023에서 제시하고 있는 고장률과 비교 하였으며 데이터 형태에 따라 적용방안을 검토하였다.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.500-506
• /
• 2017

In 2014, ISO 55000s has been enacted and the power plant asset management is becoming a hot issue for all over the world. The asset management system is being developed as a combination of CBM(Condition Based Maintenance) and RCM(Reliability Centered Maintenance). Therefore, the research on the calculation of the failure rate which is the most basic index of RCM is actively carried out. The failure rate calculation has been going on for a long time, and the most widely used probability distribution is the Weibull distribution. In the Weibull distribution, the failure rate function is determined in three types according to the value of the shape parameter. However, the Weibull distribution has a limitation that it is difficult to apply it when the trend of failure rate changes-such as bathtub curves. In this paper, the failure rate is calculated using the mixture Weibull distribution which can appropriately express the change of the shape of the failure rate. Based on these results, we propose the necessity and validity of applying mixture Weibull distribution.