Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지
DOI QR코드

DOI QR Code

A Method of Failure Detection Rate Calculation for Setting up of Guided Missile Periodic Test and Application Case

유도탄 점검주기 설정을 위한 고장 탐지율 산출 방안 및 적용 사례

  • 최인덕 ((주)한화 종합연구소 ILS센터)
  • Received : 2019.03.26
  • Accepted : 2019.05.21
  • Published : 2019.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.

Keywords

References

  1. Failure Mode/Mechanism Distributions 2013, Reliability Information Analysis Center (RIAC), 2012.
  2. Gallay, R., Metallized film capacitor lifetime evaluation and failure mode analysis, Proceedings of the CASCERN Accelerator School Power Converters, Baden, Switzerland, 2014.
  3. Jeong, S.H. and Lee, S.B., Analysis of ${\triangl}{\triangl}$ Guided Missile Inspection Period Based on Storage Reliability, Journal of the Korea Academia-Industrial cooperation Society, 2017, Vol. 18, No. 4, pp. 592-598. https://doi.org/10.5762/KAIS.2017.18.1.592
  4. Jeong, S.W. and Chung, Y.B., Optimal inspection policy for one-shot systems considering reliability Goal, Journal of Society of Korea Industrial and Systems Engineering, 2017, Vol. 40, No. 4, pp. 96-104. https://doi.org/10.11627/jkise.2017.40.4.096
  5. Kim, D.K., Kang, W.S., and Kang, S.J., A study on the storage reliability determination model for one-shot system, The Journal of The Korean Operations Research and Management Science Society, 2013, Vol. 38, No. 1, pp. 1-13. https://doi.org/10.7737/JKORMS.2013.38.1.001
  6. Kim, H.W. and Yun, W.Y., Reliability Analysis for One-Shot Systems with Periodic Inspection, Journal of the Korean Institute of Industrial Engineers, 2015, pp. 1-10.
  7. Lee, J.M., Kwon, K.S., and Lee, H.P., The study on estimating preventive maintenance period and life cycle of missile system, Proceedings of Korea Institute of Industrial Engineers Autumn Academic Conference, 2011, pp. 1172-1176.
  8. Martinez, E.C., Storage reliability with periodic test, Reliability and Maintainability Symposium, 1984, pp. 181-185.
  9. Practice Guidelines of Ammunition ILS, Ammunition Support Command, 2018.
  10. Reliability Prediction of Electronic Equipment(MILHDBK-217F), U.S. Department of Defense, 1991.
  11. Seo, J.H., Ko, J.Y., and Park, H.J., Built-In-Test Coverage Analysis Considering Failure Mode of Electronics Components, Journal of The Korean Society for Aeronautical and Space Sciences, 2015, Vol. 43, No. 5, pp. 449-422. https://doi.org/10.5139/JKSAS.2015.43.5.449
  12. The Rome Laboratory Reliability Engineer's Toolkit, U.S Air Force Materiel Command (AFMC), 1993.
  13. Vasina, P., Zednicek, T., Sikula, J., and Pavelka, J., Failure modes of tantalum capacitors made by different technologies, Microelectronics Reliability, 2002, Vol. 42, Issue 6, pp. 849-854. https://doi.org/10.1016/S0026-2714(02)00034-3