• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.339-353
• /
• 1998

The purpose of this study was to investigate whether a radiographic estimate of osseous fractal dimension and power spectrum of 2D discrete Fourier transform is useful in the characterization of structural changes in bone. Ten specimens of bone were decalcified in fresh 50 ml solutions of 0.1 N hydrochloric acid solution at cummulative timed periods of 0 and 90 minutes. and radiographed from 0 degree projection angle controlled by intraoral parelleling device. I performed one-dimensional variance. fractal analysis of bony profiles and 2D discrete Fourier transform. The results of this study indicate that variance and fractal dimension of scan line pixel intensities decreased significantly in decalcified groups but Fourier spectral analysis didn't discriminate well between control and decalcified specimens.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.66-71
• /
• 2003

Profiles of naturally fractured surfaces of three sedimentary rock samples were plotted from the measured data using a mechanical profilometer. Fractal dimension of these profiles were computed and statistical F-test indicates that fractal dimension (FD) values can be used as a parameter for distinguishing the rock types. The comparison between FD values and a commonly used profile-roughness parameter called the Mayer's $Z_2$ parameter shows the superiority of the FD values as roughness estimator. Two-dimensional fractal roughness parameters of the same naturally fractured rock surfaces were also studied from their scanning electron microscopic (SEM) images at various magnification levels. The most suitable level of magnification of the SEM images for the study of the 2-D fractal roughness parameter was identified. The values of 2-D fractal roughness parameter for three different rocks were also compared using different methods of fractal dimensioning.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.755-759
• /
• 2000

The determination of surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of various frictional surface. the wear test was carried out under different experimental conditions in dry friction. And fractal descriptors was applied to frictional surface of laser modified steel with image processing System. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Topography of frictional surface can be effectively obtained by fractal dimensions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.109-114
• /
• 2008

The fractal dimension aims to quantitatively define the irregular characteristics of the shape in nature. It can be useful in describing morphological characteristics of various wear particles. This paper was undertaken to diagnose failure condition for sliding members in lubrication using fractal dimension. The experiments were undertaken to analyze the shape of wear particles and to diagnose failure condition for sliding members in lubrication using the image processing and the fractal parameters. It was possible to diagnose wear mechanism, friction, and damage state of machines through analysis of shape characteristics for wear particle in driven condition using fractal parameters.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.1
• /
• pp.12-16
• /
• 2010

The morphology of the passivated surface of stainless steel (SS) was quantitatively characterized based on fractal geometry. In particular, the surface irregularities of the passivated 304 and 439 SSs were comparatively analyzed in terms of their self-similar fractal dimensions. The passivated surface of 439 SS in an acid-based electrolyte proved to have a higher fractal dimension, as compared to that of 304 SS, esp. at a scale of several tens of nanometers, strongly indicating the higher irregularity of the passivated surface. It is anticipated that the fractal approach suggested herein might be effectively utilized to analyze the irregularity of the steel surface and/or the compactness of the oxide film.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.2
• /
• pp.112-116
• /
• 2010

Fractal property of the passivated steel surface was investigated on the basis of scaling analysis with a special focus on its relationship with corrosion resistance. For this purpose, the surface of stainless steel was intentionally oxidized under a variety of passivation conditions and its scaling property was analyzed by a triangulation method. The morphology of the passivated steel surface was satisfactorily evaluated with fractal dimension. From the chronoamperometry and impedance measurement, it proved that lower fractal dimension leads to more enhanced corrosion resistance. The higher passivity of the steel surface with lower fractal dimension was discussed in terms of active area and structural imperfection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.332-337
• /
• 2002

The applicability of models based on fractal geometry to characterize the surface of the EL devices was investigated. Insulating layer and phosphor layer of EL devices were deposited on ITO glass using e-beam method. The images of phosphor layer by scanning electron microscope(SEM) were transformed to binary coded data. The relations between fractal geometry and electrical characteristics of EL devices were investigated. When the fractal dimension of $Cas:EuF_3$ EL device was 1.82 and its grain boundary area was 19%, the brightness of $Cas:EuF_3$ EL device was 261 cd/$\textrm{m}^2$.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.36-38
• /
• 2008

The purpose of the study is to propose a new surface design concepts within fractal pattern. In this study, I am offering the fractal concepts drawn from science, as a new anchoring point for surface design. Fractal Patterns are generated by transforming a seed slab into a number of constituent elements through fractal operations of rotation, scaling and linear transformations. These elements are bound together as a second generation seed shape which is reiterated according to the same transformations. This process continues for as many generations as desired. In conclusion, this study places a great emphasis on the natural pattern order to the surface generation, which I hope will contribute to generating a number of creative possibilities for interior design.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.23-28
• /
• 2000

The determination of surface morphology is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe morphology of various rubbed surface, the wear test was carried out under different experimental conditions in lubricating wear. And fractal descriptors was applied to rubbed surface of hydraulic driving material with image processing system. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Morphology of rubbed surface can be effectively obtained by fractal dimensions.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.505-513
• /
• 2020

Grading of aggregate influences significantly almost all of the concrete performances. The purpose of this paper is to propose practicable equations that express the optimized total aggregate gradation, by weight or by number of particles in a concrete mix. The principle is based on the fractal feature of the grading of combined aggregate in a solid skeleton of concrete. Therefore, equations are derived based on the so-called fractal dimension of the grain size distribution of aggregates. Obtained model was then applied in such a way a correlation between some properties of the dry concrete mix and the fractal dimension of the aggregate gradation has been built. This demonstrates that the parameter fractal dimension is an efficacious tool to establish a unified model to study the solid phase of concrete in order to design aggregate gradation to meet certain requirements or even to predict some characteristics of the dry concrete mixture.