• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.233-241
• /
• 2018

This paper describes a lightweight implementation of a cryptographic processor supporting GCM (Galois/Counter Mode) authenticated encryption (AE) that is based on the two block cipher algorithms of ARIA and AES. It also provides five modes of operation (ECB, CBC, OFB, CFB, CTR) for confidentiality as well as the key lengths of 128-bit and 256-bit. The ARIA and AES are integrated into a single hardware structure, which is based on their algorithm characteristics, and a $128{\times}12-b$ partially parallel GF (Galois field) multiplier is adopted to efficiently perform concurrent processing of CTR encryption and GHASH operation to achieve overall performance optimization. The hardware operation of the ARIA/AES-GCM AE processor was verified by FPGA implementation, and it occupied 60,800 gate equivalents (GEs) with a 180 nm CMOS cell library. The estimated throughput with the maximum clock frequency of 95 MHz are 1,105 Mbps and 810 Mbps in AES mode, 935 Mbps and 715 Mbps in ARIA mode, and 138~184 Mbps in GCM AE mode according to the key length.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.20-25
• /
• 2009

We propose hardware architecture of floating-point square root and inverse square root arithmetic units using lookup tables. They are used for lighting engines and shader processor for 3D graphic processing. The architecture is based on Taylor series expansion and consists of lookup tables and correction units so that the size of look-up tables are reduced. It can be applied to 32 bit floating point formats of IEEE-754 and reduced 24 bit floating point formats. The square root and inverse square root arithmetic units for 32 bit and 24 bit floating format number are designed as the proposed architecture. They can operation in a single cycle, and satisfy the precision of $10^{-5}$ required by OpenGL 1.x ES. They are designed using Verilog-HDL and the RTL codes are verified using an FPGA.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.103-108
• /
• 2016

With the growing trend of pervasive computing, (the idea that technology is moving beyond personal computers to everyday devices) there is a growing demand for lightweight ciphers to safeguard data in a network that is always available. For all block cipher applications, the AES is the preferred choice. However, devices used in pervasive computing have extremely constraint environment and as such the AES will not be suitable. In this paper we design and implement a new lightweight compact block cipher that takes advantage of both S-P network and the Feistel structure. The cipher uses the S-box of PRESENT algorithm and a key dependent one stage omega permutation network is used as the cipher's P-box. The cipher is implemented on iNEXT-V6 board equipped with virtex-6 FPGA. The design synthesized to 196 slices at 337 MHz maximum clock frequency.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.522-531
• /
• 2018

A public-key cryptography processor EC-RSA was designed, which integrates a 224-bit prime field elliptic curve cryptography (ECC) defined in the FIPS 186-2 as well as RSA with 2048-bit key length into a single hardware structure. A finite field arithmetic core used in both scalar multiplication for ECC and exponentiation for RSA was designed with 32-bit data-path. A lightweight implementation was achieved by an efficient hardware sharing of the finite field arithmetic core and internal memory for ECC and RSA operations. The EC-RSA processor was verified by FPGA implementation. It occupied 11,779 gate equivalents (GEs) and 14 kbit RAM synthesized with a 180-nm CMOS cell library and the estimated maximum clock frequency was 133 MHz. It takes 867,746 clock cycles for ECC scalar multiplication resulting in the estimated throughput of 34.3 kbps, and takes 26,149,013 clock cycles for RSA decryption resulting in the estimated throughput of 10.4 kbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8C
• /
• pp.763-770
• /
• 2006

In this paper, a variable Reed-Solomon(RS) decoder with erasure decoding functionality is designed based on the modified Euclid's algorithm(MEA). The variability of the decoder is implemented through shortening and puncturing based on the RS(124, 108, 8) code, other than the primitive RS(255, 239, 8) code. This leads to shortening the decoding latency. The decoder performs 4-step pipelined operation, where each step is designed to be clocked by an independent clock. Thus by using a faster clock for the MEA block, the complexity and the decoding latency can be reduced. It can support both continuous- and burst-mode decoding. It has been designed in VHDL and synthesized in an FPGA chip, consuming 3,717 logic cells and 2,048-bit memories. The maximum decoding throughput is 33 MByte/sec.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.206-211
• /
• 2005

We describe the design for a correlator and an access code generator in bluetooth system. These are used for a connection setting, a packet decision and a clock synchronization between Bluetooth units. The correlator consists of two blocks; carry save adder based on Wallace tree and threshold-value decision block. It determines on an useful packet and clock-synchronization for input signal of 1.0Mbps through the sliding-window correlating. The access-code generator also consists of two blocks; BCH(Bose-Chadhuri-Hocquenghem) cyclic encoder and control block. It generates the access-codes according to four steps' generation process based on Bluetooth standard. In order to solve synchronization problem, we make use of any memory as a pseudo random sequence. The proposed correlator and access-code generator were coded with VHDL. An FPGA Implementation of these modules and the simulation results are proved by Xilinx chip. The critical delay and correlative margin based on synthesis show the 4.689ns and the allowable correlation-error up to 7-bit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1311-1319
• /
• 2007

This paper presents the VHDL implementation procedure of the passive RFID tag operating in Ultra High Frequency. The operation of the tag compatible with the EPCglobal Class1 Generation2(GEN2) protocol is verified by timing simulation after synthesis and implementation. Due to the reading range with relatively large distance, a passive tag needs digital processor which facilitates faster decoding, encoding and state transition for enhancement of an interrogation rate. In order to satisfy linking time, the pipe-line structure is used, which can minimize latency to serial input data stream. We also propose the sampling strategy to decode the Preamble, the Frame-sync and PIE symbols in reader commands. The simulation results with the fastest data rate and multi tags environment scenario show that the VHDL implemented tag performs faster operation than GEN2 proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.257-260
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm“Rijndael”. To achieve high throughput rate, a sub-pipeline stage is inserted into the round transformation block, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. For area-efficient and low-power implementation the round transformation block is designed to share the hardware resources in encryption and decryption. An efficient scheme for on-the-fly key scheduling, which supports the three master-key lengths of 128-b/192-b/256-b, is devised to generate round keys in the first sub-pipeline stage of each round processing. The cryptoprocessor designed in Verilog-HDL was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}{\textrm}{m}$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.343-350
• /
• 2016

A secure and effective on-chip bus for detecting and preventing malicious attacks by infected IPs is presented in this paper. Most system inter-connects (on-chip bus) are vulnerable to hardware Trojan (Malware) attack because all data and control signals are routed. A proposed secure bus with modifications in arbitration, address decoding, and wrapping for bus master and slaves is designed using the Advanced High-Performance and Advance Peripheral Bus (AHB and APB Bus). It is implemented with the concept that arbiter checks share of masters and manage infected masters and slaves in every transaction. The proposed hardware is designed with the Xilinx 14.7 ISE and verified using the HBE-SoC-IPD test board equipped with Virtex4 XC4VLX80 FPGA device. The design has a total gate count of 39K at an operating frequency of 313MHz using the $0.13{\mu}m$ TSMC process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.885-888
• /
• 2015

A secure and effective on-chip bus for detecting and preventing malicious attacks by infected IPs is presented in this paper. Most system inter-connect (on-chip bus) are vulnerable to hardware Trojan (Malware) attack because all data and control signals are routed. A proposed secure bus with modifications in arbitration, address decoding, and wrapping for bus master and slaves is designed using the Advanced High-Performance and Advance Peripheral Bus (AHB and APB Bus). It is implemented with the concept that arbiter checks share of masters and manage infected masters and slaves in every transaction. The proposed hardware is designed with the Xilinx 14.7 ISE and verified using the HBE-SoC-IPD test board equipped with Virtex4 XC4VLX80 FPGA device. The design has a total gate count of 40K at an operating frequency of 250MHz using the $0.13{\mu}m$ TSMC process.