• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.243-245
• /
• 2007

This paper presents the implementation of teleoperation control of an omni-direction mobile robot. The master joystick robot has two degrees of freedom to control the movement of the slave mobile robot in the Cartesian space. In addition, the whole teleoperated control system is closed by the force feedback. The operator can feel the contact force as the slave robot makes contact with the environment. Experimental results show that the teleooerated control with force feedback has been successfully implemented.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.481-484
• /
• 2008

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Element that analyze derailment coefficient is consisted of wheel load and lateral force. In this paper, studied about method that calculate vertical force(wheel load) by bending load of axle in rolling stocks.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.23-27
• /
• 1990

This paper proposes the calculation method of the needed thrust force and the input current which are considered the end effect and the normal force effect of SLIM for the propulsion vehicles. To estaninate theperformance of SLIM, the thrust force, the normal force, the efficiency and the power factor are comput ed according to the variation of frequency and pole pitch.

• Tribology and Lubricants
• /
• v.21 no.5
• /
• pp.221-226
• /
• 2005

A new calibration method for exact measurement of friction force in atomic force microscope (AFM) is presented. A new conversion factor involves a contact factor affected by tip, cantilever and contact stiffness. Especially the effect of contact stiffness on the conversion factor between lateral force and lateral signal is considered. Conventional conversion factor and a new modified conversion factor were experimentally compared. Results showed that a new calibration method could minimize the effect of normal load on friction force and improve the conventional method. A new method could be applied to the specimens with different physical properties.

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.62-69
• /
• 2012

Atomic force microscopy (AFM) has been widely utilized as a versatile tool not only for imaging surfaces but also for understanding nano-scale interfacial phenomena. By measuring the responses of the photo detector due to bending and torsion of the cantilever, which are caused by the interactions between the probe and the sample surface, various interfacial phenomena and properties can be explored. One of the challenges faced by AFM researchers originates in the physics of measuring the small forces that act between the probe of a force sensing cantilever and the sample. To understand the interactions between the probe and the sample quantitatively, the force calibration is essential. In this work, the procedures used to calibrate AFM instrumentation for nano-scale force measurement in normal and lateral directions are reviewed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.798-807
• /
• 2003

We propose a blind mobile robot force control algorithm that uses force information as a guidance toward to the goal position. Based on the mobile robot dynamics, the control law is formed from explicit force errors. Simulation studies are conducted based on the kinematics and the dynamics of the mobile robot. Simulation results show that good force tracking can be achieved. In order to confirm simulation results, experiments are performed. The robot is commanded to follow unknown environment with maintaining a certain desired force. Experimental results show that the blind mobile robot successfully maintains contact with a regulated desired force and arrives at the goal position.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1700-1706
• /
• 2016

In this paper, a dual-stator, spoke-type linear vernier machine (DSSLVM) for wave energy extraction application was proposed. This machine is capable of producing a competitively high thrust force and force density at a low operation speed in direct drive systems. The operation principal and working of the proposed DSSLVM were studied. The stator core height is adjusted to improve the overall force density of the proposed machine while reducing the force ripple. To evaluate the advantages of the proposed DSSLVM, the main performance was compared with that of a recently developed linear primary permanent magnet vernier machine (LPPMVM). The proposed machine exhibited greater thrust force and force density, an improved power factor and lower force ripple with the same permanent magnet (PM) volume compared to the LPPMVM.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.58-63
• /
• 2010

A new contact force estimation technique is proposed. Keeping the contact force at a certain level between finishing tool and the object is essential since the quality of the finished surface is very sensitive to the contact force during the finishing process. However, the contact force measurement cannot be obtained by simply installing load cells under machine table or in the middle of tool linkage. The reason is that the weight of the machine table and the tool linkage are much heavier than the force to be measured. To that end, a method for estimating disturbance is proposed for a system that is similar to the mechanism of the finishing machine, and the same method is applied to estimate the contact force of the brush-type finishing machine. To verify the effectiveness of the proposed method, a small scale test set-up has been built and the method has been tested.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.115-124
• /
• 2002

The purpose of this study is to analyze the ground reaction force of arm landing on arm and leg during sports aerobics. Subjects of this study were total 10 players of 5 males and 5 females who have are domain sports aerobics medalists more than the third place in national tournaments. The subjects jumped between the two ground reaction force analyzers, while landing their right hand on the front platform(#1) and their right leg on the rear platform(#2), and the data frequency was set to 200Hz. Findings of this study are as follows; More than 3 times of impact peak force of vertical reaction force acted on arm joint than on leg joint. And, when ground reaction force on foot increased, ground reaction force on hand decreased. 3 impact peaks of curve of ground reaction force were found - Impact Peak 1 incurred on the time the palm lands on the ground, Impact Peak 2 absorbing shock secondarily on wrist joint, and Active Peak incurred on the time of holding the weight while pushing out the severly bent elbow joint.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.95-97
• /
• 1996

Circular coils are widely used in electromagnetic applications, and the force in a sets of coils consisting of more than two can be divided into three components. Among them, one component called radial force is acting on the radial axis, and it is exposed as stree or impact. Calculation of the radial force was used to be performed by introducing Ampear's law of force which is $F=J{\times}B$. However, many cases in analyzing a system, calculation method from the mutual inductance between the coils is oftenly employed to get the axial force and resulting dynamics. In this case, if the calculation of radial force from the mutual inductance is possible, flow of the calculation for the system analysis would be much more simpler.