• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.89-94
• /
• 2015

FMS which has a concept that wireless terminal can replace wire terminal services is a technologies that is can provide service costs same as wire terminal in the special zone. Enterprise type of FMC that is developed making up for the weak point is must have to improve voice quality and FMC performance in the soft phone. This paper measure voice quality based on the one way of the total estimated delay time of FMC to carry out IMS services between IP-PBX and FMC soft-phone to operate it's controller optimally and put forward evidence to be in 120ms and 150ms in the VoIP FMC voice quality. To measure FMC performances in four categories evaluated trials and prove its performances.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.85-90
• /
• 2015

Work environments within the firm with a concept of mobile office is growing divided into two sections. It's Wi-Fi FMC(Fixed Mobile Convergence) field Which are implemented in a telephone service available from existing fixed-line service in the center of the smart phones and the EMS(Enterprise Mobility Service) field to make people will be able to handle PC the center of the information system within an enterprise using a smart phone instead of terminal facility connects to a system in the workplace and external. This paper developed FMC controller to allow execution IMS(IP Multi-Media Subsystem) services to complement the issues of the FMC corporation, telephony service associated. The controller includes FMC automatic enrollment services, voice quality enhancement of the mobile phone, anywhere within the firm on his mobile phone calls can provide mobility and is also implemented FMC LCR function that use status information from mobile soft-phone within the IP-PBX.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.487-495
• /
• 1996

The objective of this study was to investigate the actual state of the national project to promote the management of Forest Management Cooperatives(FMC). To fulfil the objective, we have reviewed recent statistics, regulations, and publications related with FMC and interviewed officials and professionals engaged in FMC-related organizations. Also cognition of members on the actual state of the management of FMC's was studied by a questionnaire survey. The questionnaire was designed to get understandings of the general cognition of FMC's members associated with forest management and FMC's management activities. According to the results of the survey, more than 50% of members are not interested in forest management and most of them are not satisfied with the activity of FMC. In this paper, the results of analyses for the survey are discussed in detail. On the other hand, statistics indicate that the basic policy for FMC contributes to rapid growth in the number of local FMC's. However, the increase of FMC's has negative effect on management conditions of existing FMC's because of reduced budget allocation from the government. In addition, we concluded that some parts of current regulations for FMC are unfavorable in promoting the spontaneous management activities of local FMC's.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.806-809
• /
• 2009

본 논문에서는 FMC의 로봇 경로 분석 및 설계를 하기 위해 시뮬레이션을 이용해 FMC의 로봇 패턴을 분석하고 그 결과를 이용해 최적의 로봇 경로를 설계하는 방법을 제시하였다. 전형적인 FMC를 시뮬레이션으로 설계하고 설비에서 신호를 추출 해 순차 패턴 마이닝을 이용해 로봇의 최적 이동 경로를 도출하는 방법을 제시하였다. 이러한 신호의 패턴을 이용한 분석 방법은 로봇의 경로 설계를 도출하기가 용이하여 최적의 경로를 설계하여 FMC에 적용한 결과 기존보다 총 처리량의 증가와 총 처리시간 감소를 가져왔다. 또한 이 방법은 FMC 뿐만 아니라 로봇이 있는 모든 생산라인에 시뮬레이션을 통해 분석이 가능하기 때문에 생산성 향상에 크게 기여할 것으로 기대된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.262-267
• /
• 1992

본 논문에서는 국내 중소기업을 위한 기술지원의 일환으로 시범적으로 개발한 자동화 모델을 소개한다. 개발된 모델은 자동차에 사용되는 오일 펌프 드리이브용 기어를 대상부품으로한 FMC(Flexible Manufacturing Cell)로서 선삭과 치절( Hobbing)공정을 자동화 하는 2 Set의 FMC로 구성되어있다. FMC 개발을 위하여 대상부품 특성과 공정을 분석하였으며 개발된 시스템의 구성 및 개별장비에 대한 기능에 대해 기술하였다.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.249-257
• /
• 2008

This paper shows the Applied Q-learning Algorithm which supports selecting the waiting position of a robot and the part serviced next in the Flexible Manufacturing Cell (FMC) that consists of one robot and various types of facilities. To verify the performance of the suggested algorithm, we design the general FMC made up of single transfer robot and multiple machines with a simulation method, and then compare the output with other control methods. As a result of the analysis, the algorithm we use improve the average processing time and total throughputs as well by increasing robot utilization, reversely, by decreasing robot waiting time. Furthermore, because of ease of use compared with other complex ways and its adoptability to real world, we expect that this method contribute to advance total FMC efficiency as well.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.507-512
• /
• 2012

Image blurring in airborne camera can be prevented through timely actuation of LOS(Line of Sight) into the opposite direction to the aircraft advancement, i.e. FMC(Forward motion compensation). Performance verification of FMC requires installation of camera to the aircraft. However, in many ways the verification process has little choice but to be implemented in the laboratory. In this paper verification method of FMC performance in the laboratory is introduced. With collimator target installed in the known reference position image obtained by actual mission plan naturally displays image blurring as well as LOS displacement by FMC effect. Through comparison of the amount of those image blurring and LOS displacement to the equivalent image distortion expected by the application of the FMC reference command can the performance be verified. In this paper we propose a new verification method of FMC performance in laboratory along with generalized solution of FMC reference command, and assess the validity of our proposition.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.821-825
• /
• 1991

This paper presents an architecture and control logic of a Flexible Manufacturing Cell (FMC) which is one of the important elements under Computer Integrated Manufacturing (CIM) environment. To implement FMC, it is very important to develop a software which can control and monitor the overall system in an integrated environment. Our primary concern in this research is not to develop individual systems, but to integrate them in the hierarchical control level. Progress on the research of integrating CAD/CAM, Process Planning, Off-line Robot Programming and Simulation module into FMC control system is reported. FMC hardware system used here has an Automated Storage & Retrieval System (AS/RS), a conveyor system, a transfer robot, a CNC milling machine, a bar-code system, and an IBM PC/AT as Cell Control System (CCS). In order to demonstrate the operational result, the name plates, text-carved aluminium plates, are manufactured by this system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.3
• /
• pp.31-40
• /
• 1993

This paper deals with the modeling and scheduling for FMC(Flexible Manufacturing Cells). The FMC system composed of unit or multi cells is capable of improving productivity with flexibility for machine. However, the properties of multiple jobs and various alternatives results in tne dynamic states which make system management very complex. The extended Peti nets are used to represent for complex properties of FMC which performs short-term scheduling and dynamic operational scheduling. The hierarchical control structure and integlligent scheduling through expert module are adopted for efficiency of FMC operations. The computer simulation reveals that intelligent scheduling method is better than heuristics in various performance indices.