• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.23-31
• /
• 1991

최근 레이저 분광학에 있어서 고감도 분광법으로 알려져 있는 주파수 변조 분광법(frequency modulation spectroscopy)과 레이저 광 주파수 안정화 응용에 대한 원리와 특징을 살펴본다. 또 super-cavity을 이용한 단일모드 He-Ne 레이저를 사용하여 FM 분광신호를 검출하고 그 신호특성에 대하여 기술하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1187-1194
• /
• 2008

This paper presents a high-power electronic ballast for a metal-hallide lamp(MHL) that employs frequency modulation(FM) technique to eliminate acoustic resonance(AR). The proposed ballast consists of a full-bridge rectifier, a power factor correction(PFC) circuit, a full-bridge(FB) inverter, an ignitor using LC resonance and an FM control circuit. Whereas a manual PFC provides advantages in terms of high reliability and low cost for constructing the circuit, it is difficult to supply a stable voltage because of the output voltage ripple that occurs with a period of 120Hz. Although the ballast can be designed with a small size and a light weight if it is driven at a switching frequency between 1 and 100 kHz, AR will occur if the eigen-value frequency of the lamp coincides with the inverter's operation frequency. The operation frequency was modulated in real time according to the output voltage ripple to compensate for the variation in power supplied to the lamp and eliminate AR. Performance of the proposed technique was validated through numerical analysis, computer simulation using PSPICE and by applying it to an electronic ballast for a prototype 1kW MHL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.2
• /
• pp.63-75
• /
• 1983

This paper has investigated and discussed the effects of multiple PSK signals upon an wideband FM signal in an intersystem interference environment between analog and digital radios. Using the derived approximate equation for the output haseband interference noise, the signal-to-interference noise power ratio(SNR) in the top channel baseband signal has been numerically calculated. The results are plotted in graphs as the functions of carrier-to-noise ratio(CNR), carrier-to interfer power ratio(CIR), and normalized carrier separation. From the results in this paper, one can know some optimu, or suitable, operating conditions(frequency allocation, bandwidth, and power, etc.) for an FM channel in the intersystemn interferences from digital PSK channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1233-1239
• /
• 2000

In this paper, a new approach is proposed for effectively estimating the occupied bandwidth of frequency modulation (FM) signals. The proposed method makes use of the smoothing niter for removing the perturbation of spectrum envelope, which frequently occurs in FM signals having the instantaneous frequency. An effective procedure is derived for finding the relatively accurate bandwidth of FM signals combined with x-dB bandwidth measurement method, which International Telecommunication Union-Radiocommunication (ITU-R) recommended. It was shown that the proposed approach provides superior performance relative to the one obtained with the x-dB bandwidth measurement method in terms of sample bias and mean squared error of bandwidth estimates.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.3
• /
• pp.24-38
• /
• 1994

In this paper we develop the software simulator written in a C language for a frequency modulation synthesis and the approximate range of parameters, for a musically satisfactory timbre, obtained by using the software simulator will be applied to develop an algorithm for parameter extraction. For a frequency modulation synthesis, we also develop an algorithm for parameter extraction through waveform analysis in the time domain as well as spectrum analysis using a FFT in the frequency domain. To verify the validity of the developed algorithm as well as software simulator experimentally, we extract parameters for the several music instruments using the suggested algorithm and analyze the synthesized sound by applying the parameters to the software simulator. The evaluation of the synthesized sound is first done by listening the sound directly as a subjective testing. Secondly, to evaluate the synthesized sound objectively with an engineering sense, we compare the synthesized sound with an original one in a time domain and a frequency domain.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2015

A blind hopping phase estimator is proposed for the demodulation of received signals in frequency-hopping spread spectrum systems. The received signals are assumed to be bandwidth limited with a shaping filter, modulated as frequency modulation (FM) or binary frequency shift keying (BFSK), and hopped by predetermined random frequency sequences. In the demodulation procedure in this paper, the hopping frequency tracking is accomplished by choosing a frequency component with maximum amplitude after taking a discrete Fourier transform, and the hopping phase estimator performs the conjugated product of two consecutive signals and moving-average filtering. The probability density function and Cramer-Rao low bound (CRLB) of the proposed estimator are evaluated. The proposed scheme not only is very simple to implement but also performs close to the CRLB in demodulating hopped FM/BFSK signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.493-500
• /
• 2008

This paper describes a design of internal frequency modulation(FM) radio antenna fur mobile terminal. In order to control of impedance at an operating frequency of the designed antenna, the lumped constant elements of R and L chip components are used. Patch and stubs located at antenna backside are added to control an exact resonance frequency and miniaturization. A fabricated antenna sire, the measured return loss, impedance, bandwidth, and gain are $40{\times}70{\times}1$ mm, -23 dB at 99 MHz, $55-j7{\Omega}$, 22 MHz($88{\sim}110$ MHz) below -10 dB, and -15 dBi, respectively. These measured results show a good agreement with simulated results. Especially, the measured gain of fabricated antenna is similar with value of a conventional ear-phone antenna in the designed frequency band. The measured radiation pattern agrees well with the calculated omni-directional pattern.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.904-911
• /
• 2010

This paper presents the design of acoustic resonance free and over current limit during transient state consideration electronic ballast for 1.5kW Metal-Halide Lamp(MHL) that employs frequency modulation (FM) technique. The proposed ballast consists of a Full-Bridge(FB) rectifier, a passive power factor correction (PFC) circuit, a full-bridge inverter, an ignitor using LC resonance and a control circuit for frequency modulation. The frequency modulation technique is the most effective solution to eliminate acoustic resonance among other technique. It spreads power spectrum of lamp to reduce the supplied power spectrum under the energy level of eigen-value frequency. Moreover, the proposed ballast is simple and cost effective above conventional ballast. A new PFC circuit is proposed which combines with LCD type and PCSR filter. A new PFC circuit has higher PF and lower THD than conventional LCD type and secure high reliability. Finally, to protected switching components in transient state, the surge current into ballast is limited by increase the switching frequency. Performance of the proposed ballast was validated through computer simulation using Pspice, experimentation and by applying it to an electronic ballast for a prototype 1.5kW MHL.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1204-1208
• /
• 1991

This paper describes the 2-channel telemeter system using AM(Amplitude Modulation) - FM (Frequency Modulation) techniques suitable for measurement of spindle torque by strain gage. In order to evaluate the developed system, the model tests were performed for test specimens. The developed system was installed on the plate mill and it was possible to measure and analyze the torque signal of spindle,