• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.23-31
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.535-536
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.469-470
• /
• 2007

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.482-486
• /
• 2004

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its use in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies, such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. This paper presents that the recent development and our research goals in FIB nano machining technology are given. The emphasis will be on direct milling, or chemical vapor deposition techniques (CVD), and this can distinguish the FIB technology from the contemporary photolithography process and provide a vital alternative to it. After an introduction to the technology and its FIB principles, the recent developments in using milling or deposition techniques for making various high-quality devices and high-precision components at the micro/nano meter scale are examined and discussed. Finally, conclusions are presented to summarize the recent work and to suggest the areas for improving the FIB milling technology and for studying our future research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.332-337
• /
• 2006

We prepared 100 nm-thick CoNi composite silicide on a 70 nm-thick polysilicon substrate. Composite silicide laye.s were formed by rapid thermal annealing(RTA) at the temperatures of $700^{\circ}C,\;900^{\circ}C,\;1000^{\circ}C$ for 40 seconds. A Focused ion beam (FIB) was used to make nano-patterns with the operation range of 30 kV and $1{\sim}100$ pA. We investigated the change of thickness, line width, and the slope angle of the silicide patterns by FIB. More easily made with the FIB process than with the conventional polycide process. We successfully fabricated sub-100nm etched patterns with FIB condition of 30kv-30pA. Our result implies that we may integrate nano patterns with our newly proposed CoNi composite silicides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.615-620
• /
• 2008

We fabriacted thermal evaporated $10nm-Ni_{1-x}Co_x$(x=0.2, 0.6, and 0.7) films on 70 nm-thick polysilicon substrate with $0.5{\mu}m$ line width. NiCo composite silicide layers were formed by rapid thermal annealing (RTA) at the temperatures of $700^{\circ}C$ and $1000^{\circ}C$. Then, we checked the microstructure evaluation of silicide patterns. A FIB (focused ion beam) was used to micro-mill the interconnect patterns with low energy condition (30kV-10pA-2 sec). We investigated the possibility of selective removal of silicide layers. It was possible to remove low resistance silicide layer selectively with the given FIB condition for our proposed NiCo composite silicides. However, the silicides formed from $Ni_{40}Co_{60}$ and $Ni_{30}Co_{70}$ composition showed void defects in interconnect patterns. Those void defects hinder the selective milling for the NiCo composite silicides.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.304-313
• /
• 1993

집속 이온빔 기술은 고해상도의 이온빔 리토그라피, 마스크가 필요없는 이온주입, 그리고 Ion beam induced deposition 등 반도체 소자의 미세가공에 널리 이용되어 왔다. 좋은 안정도와 높은 전류밀도, 적은 에너지 퍼짐 그리고 낮은 에미턴스와 높은 선명도를 갖는 집속 이온빔 장비를 위한 액체 갈륨 이온원이 한국에서 개발 시업되었다. 이온빔의 전압이 15kV, 렌즈전압이 7kV 그리고 렌즈상단에 위치한 aperture의 직경이 0.2mm일 때, 0.1$mu extrm{m}$의 빔 직경으로 집속되는 정전 einzel렌즈가 설계 조립되었고, FIB 진공 chamber는 렌즈부와의 차 등 진공시스템으로 구성되어 설계제작되었다. FIB 장비가 조만간 한국에서 이온빔 밀링, ion beam induced deposition 그리고 잘못된 부분의 수정 등 반도체 제작공정에서의 응용에 큰 기여를 할 것이라 기대된다.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.192-197
• /
• 2016

We have surveyed on technical method of fault analysis of semiconductor device. Fault analysis of semiconductor should first be found the places of fault spots. For this process they are generally used the testers; EB(emission beam tester), EM(emission microscope), OBIRCH(optical beam induced resistance change method) and LVP(laser voltage probing) etc. Therefore we have described about physical interpretation and technical method in using scanning electron microscope, transmission electron microscope, focused ion beam tester and Nano prober.