• 제목/요약/키워드: FGD

검색결과 104건 처리시간 0.036초

Evaluate Changes in Soil Chemical Properties Following FGD-Gypsum Application

  • Lee, Yong-Bok;Bigham, Jerry M.;Kim, Pil-Joo
    • 한국환경농학회지
    • /
    • 제26권4호
    • /
    • pp.294-299
    • /
    • 2007
  • Natural gypsum has been used as a soil amendment in the United States. However, flue gas desulfurization (FGD)-gypsum has not traditionally been used for agricultural purpose although it has potential benefit as a soil amendment. To expand use of FGD-gypsum for agricultural purpose, the effect of FGD-gypsum on soil chemical properties was investigated in the field scales. Application rates for this study were 0 (control), 1.1, and 2.2 Mg ha-1 of FGD-gypsum. After two year application, the soil samples were taken to 110 cm depth and sub-sampled at 10 cm intervals. The heavy metal contents in FGD-gypsum were lower than ceiling levels allowed by regulations for land-applied biosolids. Soil pH was not largely affected by FGD-gypsum application. Although degree of calcium (Ca) saturation in surface horizons increases only slightly with respect to the control, there is a clear decrease in exchangeable aluminum (Al). FGD-gypsum clearly increases the soil electrical conductivity (EC) with increasing application rate. Water-soluble Ca and sulfate is increased with FGD-gypsum application and these ions moved to a depth of at least 80 cm after only 2 years. We conclude that surface application of FGD-gypsum can mitigate toxicity of Al and deficiency of Ca in subsoil of acid soil.

탈황석고의 가공법 및 잔골재종류 변화에 따른 고로슬래그 미분말 다량 치환 모르타르의 품질 특성 (Quality of High Volume Blast Furnace Slag Mortar Depending on Desulfurization Gypsum Treating Methods and Fine Aggregate Type)

  • 한천구;이동윤
    • 한국건설순환자원학회논문집
    • /
    • 제4권2호
    • /
    • pp.157-164
    • /
    • 2016
  • 본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

유산균으로 발효한 침향공진단으로부터 분리한 Nodakenetin의 Neuraminidase 활성 억제 효능 (Neuraminidase-inhibition Activity of Nodakenetin from Gongjin-dan Fermented by Lactic Acid Bacteria)

  • 서지현;박동준;이소영;조호성;진무현
    • 한국미생물·생명공학회지
    • /
    • 제48권3호
    • /
    • pp.303-309
    • /
    • 2020
  • 대표적인 한방 보약 처방인 원방공진단을 재해석한 침향공진단 (당귀, 녹용, 산수유, 및 침향의 혼합추출물)을 유산균으로 발효하고, 침향공진단 성분 중 발효를 통해 증가하는 성분을 분리, 정제하고 nodakenetin임을 동정하였다. 발효 전 침향공진단(침향공진단 농축액 1% 함유 MRS 배지, unfermented Gongjin-dan, GD) 및 발효후 침향공진단(침향공진단 발효액, fermented Gongjin-dan, FGD)에서의 nodakenetin 함량 분석 결과, 각각 6 ㎍/ml과 70 ㎍/ml으로 발효를 통해 nodakenetin이 약 10배 이상 증가하였다. 한편, 고서에 전해지는 공진단의 면역력 강화 효능에 근거하여, GD 및 FGD의 인플루엔자 바이러스 증식 억제 효능을 확인하고자 Neuraminidase (NA) 활성 평가법(NA activity assay)을 실시하였다. 실험 결과, GD는 NA 활성을 억제하지 못하였으나, FGD는 농도의존적으로 NA 활성을 억제하였으며 500 ㎍/ml에서 대조군 대비 약 92%의 억제율을 보였다. 또한, 발효를 통해 증가한 침향공진단의 성분인 nodakenetin과 그 배당체인 nodakenin에 대한 NA 활성 평가 결과, nodakenin은 NA 활성을 거의 억제하지 못하였으나, nodakenetin은 농도의존적으로 NA 활성을 억제하였으며 250 ㎍/ml에서 대조군 대비 약 68%의 억제율을 보였다. 이상의 결과들을 종합하여, 유산균 발효를 통해 침향공진단 내에 미량 존재하던 nodakenetin이 nodakenin의 가수분해로 인해 증가하였으며, NA 활성 억제 성분인 nodakenetin이 증가함으로 인해 FGD도 높은 NA 활성 억제 효능을 보였다고 판단할 수 있었다.

습식 석회석 배연 탈황 공정에서의 석회석 재생 특성 (Characteristics of Limestone Regeneration in the wet Limestone FGD Process)

  • 손종렬;문경환;모세영
    • 한국환경보건학회지
    • /
    • 제27권4호
    • /
    • pp.9-14
    • /
    • 2001
  • This study was performed to develop the modified FGD(Flue Gas Desulfurization) process which can eliminate the possibility of generating secondary pollutants. Limestone was regenerated by adding ammonium hydroxide and carbon dioxide, and reusing it as a absorbent in FGD gypsum Process. A series of the new or modified FGD process which include desulfurization and regeneration limestone from CaSO$_3$. 1/2H20 and CaSO4 . 2H2O, were carried out under various experimental conditions. The results showed that the optimum injection ratio for regeneration of limestone was 0.3 ml/min of CO2 flow rate, 2 ml of NH4OH per 0.01 M of regent grade CaSO4 . 2H20O and the optimum regeneration temperature was 50. The increaser was the number of times of limestone regeneration, the faster was the breakthrough point of desulfurization at the desulfurination process which the regenerated limestone was used. Then the efficiency of desulrurization was decreased. This study can be confirmed the possibility for reuse of regenerated limestone due to the similarity of desulfurization characteries both reagent grade calcium carbonate and regenerated calcium carbonate. Finally, it appeared that the new technology using regenerated 1imestone can be applied to the FGD process.

  • PDF

Nitrate Removal of Flue Gas Desulfurization Wastewater by Autotrophic Denitrification

  • Liu, L.H.;Zhou, H.D.;Koenig, A.
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2007년도 학술발표회 논문집
    • /
    • pp.46-52
    • /
    • 2007
  • As flue gas desulfurization (FGD) wastewater contains high concentrations of nitrate and is very low in organic carbon, the feasibility of nitrate removal by autotrophic denitrification using Thiobacillus denitrificans was studied. This autotrophic bacteria oxidizes elemental sulfur to sulfate while reducing nitrate to elemental nitrogen gas, thereby eliminating the need for addition of organic compounds such as methanol. Owing to the unusually high concentrations of dissolved salts $(Ca^{2+},\;Mg^{2+},\;Na^+,\;K^+,\;B^+,\;SO_4^{2-},\;Cl^-,\;F^-,)$ in the FGD wastewater, extensive laboratory-scale and pilot-scale tests were carried out in sulfur-limestone reactors (1) to determine the effect of salinity on autotrophic denitrification, (2) to evaluate the use of limestone for pH control and as source of inorganic carbon for microbial growth, and, (3) to find the optimum environmental and operational conditions for autotrophic denitrification of FGD wastewater. The experimental results demonstrated that (1) autotrophic denitrification is not inhibited up to 1.8 mol total dissolved salt content; (2) inorganic carbon and inorganic phosphorus must be present in sufficiently high concentrations; (3) limestone can supply effective buffering capacity and inorganic carbon; (4) the high calcium concentration may interfere with pH control, phosphorus solubility and limestone dissolution, hence requiring pretreatment of the FGD wastewater; and, 5) under optimum conditions, complete autotrophic denitrification of FGD wastewater was obtained in a sulfur-limestone packed bed reactor with a sulfur:limestone volume ratio of 2:1 for volumetric loading rates up to 400g $NO_{3^-}N/m^3.d$. The interesting interactions between autotrophic denitrification, pH, alkalinity, and the unusually high calcium and boron content of the FGD wastewater are highlighted. The engineering significance of the results is discussed.

  • PDF

자극제로서 폐내화물 및 탈황석고가 일라이트 및 고로슬래그 다량 치환 모르타르의 물성에 미치는 영향 (Effects of Waste Refractory Powder and Desulfurization Gypsum as Activator on the Properties of High Volume Blast Furnace Slag Mortar with Illite)

  • 윤원근;한민철
    • 한국건설순환자원학회논문집
    • /
    • 제5권2호
    • /
    • pp.185-191
    • /
    • 2017
  • 본 연구는 고로슬래그 기반 모르타르에 잠재수경성 반응을 유도하기 위해 자극제로써의 역할로 WRP 및 FGD를 활용하고, 이에 탈취 및 흡착성분을 지닌 천연재료인 일라이트를 활용하여 기능성을 부여한 모르타르 환경에서 결합재 치환율 변화에 따른 모르타르의 유동성 및 강도특성을 분석하고자 한다. 실험결과, 플로는 일라이트 및 결합재 치환율이 증가할수록 유동성은 감소하는 것으로 나타났다. 공기량은 OPC와 결합재를 치환하지 않은 BSC 45를 사용한 배합 보다 BSC 65를 사용한 배합에서 낮은 공기량을 나타내었으며, 일라이트를 1% 치환한 경우 WRP 분말 및 FGD의 공기량은 서로 유사한 값을 나타냈으며, 일라이트 0%보다 전체적인 배합은 낮은 공기량을 나타내었다. 휨강도 및 압축강도의 경우는 일라이트를 치환할 시 강도는 낮아졌으며, WRP 및 FGD 치환율이 증가할수록 잠재수경성 반응으로 인해 강도는 증가하는 경향을 나타내었다. pH는 전반적으로 재령 7일까지 증가하는 경향을 나타내었고, 재령 28일의 경우에는 감소하는 경향을 나타내었으며, 일라이트를 치환율 시 미소하게 감소하는 경향을 나타내었다. 따라서, 유동성 및 강도특성 측면을 종합적으로 고려할 때 WRP 5%, FGD 5% 치환사용하는 경우가 최적의 배합인 것으로 판명되었다.

A Study on the Desulfurization Efficiency of Limestone Sludge with Various Admixtures

  • Seo, Sung Kwan;Chu, Yong Sik;Shim, Kwang Bo;Lee, Jong Kyu;Song, Hun
    • 한국세라믹학회지
    • /
    • 제52권6호
    • /
    • pp.479-482
    • /
    • 2015
  • The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

The Influence of FGD Gypsum Fabricated from Limestone Sludge on Cement Properties

  • Seo, Sung Kwan;Chu, Yong Sik;Shim, Kwang Bo;Lee, Jong Kyu;Song, Hun
    • 한국세라믹학회지
    • /
    • 제53권6호
    • /
    • pp.676-681
    • /
    • 2016
  • For the purpose of reducing the amount of limestone, which is used as a desulfurization agent to absorbing $SO_X$ gas in thermal power plants, and to recycle limestone sludge generated from a steel mill, limestone sludge was utilized as a desulfurization agent. In this study, cement, made of flue gas desulfurization (FGD) gypsum obtained in a desulfurization process using limestone sludge, was manufactured then, experiments were conducted to identify the physical properties of the paste and mortar using the cement. The results of the crystal phase and microstructure analyses showed that the hydration product of the manufactured cement was similar to that of ordinary Portland cement. No significant decline of workability or compressive strength was observed for any of the specimens. From the results of the experiment, it was determined that FGD gypsum manufactured from limestone sludge did not influence the physical properties of the cement also, quality change did not occur with the use of limestone sludge in the flue gas desulfurization process.

중소 디자인 기업을 위한 제품 기획 프로세스 제안 : 유아욕조 디자인 콘셉트 개발 사례를 중심으로 (Suggestion of Product Planning Process for Small and Medium Sized Design Company : Focused on the Case of Baby Bathtub Design Concept Development)

  • 윤우람;고정욱
    • 한국콘텐츠학회논문지
    • /
    • 제19권8호
    • /
    • pp.205-213
    • /
    • 2019
  • 국내의 많은 중소 디자인 기업들은 기업의 생존과 성장을 목표로 독자적 제품 개발 시도하고 있으나, 이에 성공하는 것은 매우 어렵다. 이러한 원인으로는 제품 기획과 관련된 경험의 부족, 디자인 프로세스의 모범사례로 제시되는 대량의 데이터에 기반한 방법론을 중소기업의 현장에서 실천하는데 있어 현실적 어려움이 있다. 이에 본 연구는 중소 디자인 기업을 위한 방법론으로 사용자 참여 프로세스의 유용성을 제시하였다. 또한 실증적 사례연구로서 중소 디자인 전문기업 P사에서 실시한 사용자 FGD 방법을 제안하였다. 사례연구에서 나타난 프로세스는 다음과 같다. 첫째, 사용자 FGD로 기존 유아욕조의 문제점 도출. 둘째, 사용자 심층인터뷰를 진행하여 다양한 계층의 사용자 의견을 수집. 셋째, 도출 아이디어를 KJ법으로 분석, 유사 요소로 그룹핑. 이를 통하여 사이즈, 재료, 안전, 기존제품 구매요인, 개선방향, 부가요소의 6가지 디자인 방향 및 세부 디자인 콘셉트를 도출하였다. 본 연구는 디자인 프로세스 중 디자인 방향성 설정 단계에 초점을 두고 진행되었다. 본 연구는 사례연구를 통해 P사의 FGD방법을 통한 중소기업 제품 기획 프로세스의 현실적인 검증성, 통합성, 신속성의 제고를 검증하였다. 이는 자본과 인력이 한정적인 중소기업에서 실행할 수 있는 현실적인 프로세스로서 가치가 있다.