• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.31-42
• /
• 2013

PURPOSES : The purpose of this study is to eliminate the noise of the vehicle after measuring the friction noise obtained from the NCPX (Noble Close ProXimity) method. The pure friction noise between the tire and road pavement could be determined from filtering the compositeness of sound and the influence of the vehicle noise. METHODS: The noise magnitude could be determined by analyzing the sound pressure level (SPL) and sound power level (PWL) along with the noise frequency of a FFT (Fast Fourier Transform) analysis as well as CPB (Constant Percentage Bandwidth) analysis. RESULTS: When the test for measuring the friction noise originated somewhere between tire and road pavement is performed with NCPX method, it must be fulfilled by attaching the surface microphone near the tire. In this condition, the surface microphone can measure the friction noise occurred at between tire and pavement, the chassis noise from the engine and power transfer units, the fluctuating aerodynamic noise, and the turbulence noise directly affected to the surface microphone. By using the NCPX method, the noise occurred at the vehicle must be eliminated for measuring the friction noise between tire and pavement from the traffic noise. CONCLUSIONS: The vehicle's testing engine noise depends on the vehicle and road types. The effect of vehicle's engine noise is less than the friction noise occurred at between tire and pavement at less than 1% effect.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.15-24
• /
• 2011

Recently various anatomic researches by using serially sectioned images in VK(Visible Korean) project are in progress. In that sense, it is very important and necessary to represent images which keep information of the original anatomic images. In this regard, there are some studies to get rid of slice patterns in coronal and sagittal images. However, according to the rapid spatial frequency changes, the ringing effect occurred in common. In addition, because of merge with the original images which have splice patterns, those patterns appeared again. Therefore, in this study we found effective color space to apply to FFT(Fast Fourier Transform) and notch filter in getting rid of the slice patterns. To verify this, we used RGB, LAB, CMYK, HSV and HSL color space. Secondly we got rid of and alleviated the ringing effect by improving notch filter. To verify this, we compared proposed method with previous study on the basis of original images by visual method and objective values. These result images are expected to contribute to anatomy research in relation to VK project.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.312-320
• /
• 2003

This work describes an 8b 200 MHz 0.18 urn CMOS analog-to-digital converter (ADC) based on a pipelined architecture for flat panel display applications. The proposed ABC employs an improved bootstrapping technique to obtain wider input bandwidth than the sampling tate of 200 MHz. The bootstrapuing technique improves the accuracy of the input sample-and-hold amplifier (SHA) and the fast fourier transform (FFT) analysis of the SHA outputs shows the 7.2 effective number of bits with an input sinusoidal wave frequency of 500 MHz and the sampling clock of 200 MHz at a 1.7 V supply voltage. Merged-capacitor switching (MCS) technique increases the sampling rate of the ADC by reducing the number of capacitors required in conventional ADC's by 50 % and minimizes chip area simultaneously. The simulated ADC in a 0.18 um n-well single-poly quad-metal CMOS technology shows an 8b resolution and a 73 mW power dissipation at a 200 MHz sampling clock and a 1.7 V supply voltage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.524-527
• /
• 2005

A society has progressed rapidly toward the highly advanced digital information age. However, noise is generated by several causes, when signal is processed. Therefore, methods for eliminating those noises have researched. There were the existing FFT(fast fourier transform) and STFT(short time fourier transform) for removing noise but it's impossible to know information about time and time-frequency localization capabilities have conflictive relationship. Therefore, for overcoming these limits, wavelet-based denoising methods that are capable of multiresolution analysis are applied to the signal processing field. However, existing threshold- and correlation-based denoising methods consider only statistical characteristics for noise, accordingly a lot of noise is acceptable as an edge and are impossible to remove AWGN and impulse noise, at the same time. Hence, in this paper we proposed wavelet-based new denoising algorithm and compared existing methods with it.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.759-767
• /
• 2020

This paper proposes a new Recurrent neural network (RNN) based spectrum sensing technique for cognitive radio communications. The proposed technique determines the existence of primary user's signal without any prior information of the primary users. The method performs high-speed sampling by considering the whole sensing bandwidth and then converts the signal into frequency spectrum via fast Fourier transform (FFT). This spectrum signal is cut in sensing channel bandwidth and entered into the RNN to determine the channel vacancy. The performance of the proposed technique is verified through computer simulations. According to the results, the proposed one is superior to more than 2 [dB] than the existing threshold-based technique and has similar performance to that of the existing Convolutional neural network (CNN) based method. In addition, experiments are carried out in indoor environments and the results show that the proposed technique performs more than 4 [dB] better than both the conventional threshold-based and the CNN based methods.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.379-388
• /
• 2016

There are some studies to get rid of slice patterns in coronal and sagittal images by FFT(Fast Fourier Transform) and Notch filter. However, the use of a notch filter is the ringing effect according to the rapid frequency change occurs in common. Therefore, this study will be to evaluate the shape and effect of the notch filter. In addition, it is proposed a new notch filter design. Results of the study are as follows. First, Emission-Notch filter was relatively naturally correcting the cutting pattern. Second, Emission-Notch filter to use as Ringing effect is reduced relatively. The next through these findings and further research progress more completely removed the Ringing effect, and expects to reproduce the data close to the actual human body information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2187-2193
• /
• 2010

A specific radar system can be implemented more easily using the frequency modulated continuous wave comparing with the pulse Doppler radar. It also has the advantage of LPI (low probability of interception) because of the low power and wide bandwidth characteristics. These radars are usually used to cover the short range area and to obtain the high resolution measurements of the target range and velocity information. The transmitted waveform is used in the mixer to demodulate the received echo signal and the resulting beat signal can be obtained. This beat signal is analyzed using the FFT method for the purpose of clutter removal, detection of a target, extraction of velocity and range information, etc. However, for the case of short signal acquisition time, this FFT method can cause the serious leakage effect which disables the detection of weaker echo signals masked by strong side lobes of the clutter. Therefore, in this paper, the weighting window method is analyzed to suppress the strong side lobes while maintaining the proper main lobe width. Also, the results of FFT beat spectrum analysis are shown under various environments.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.326-333
• /
• 2006

In this study, the vibration waveform of the single hole which is not interfered from the different blasting holes is separated, the each dominant frequency which is determinated through the Fast Fourier Transform(FFT) is measured. Also the separation waveform executed a superposition modeling which changes to delay time from 1ms to 80 ms in 1ms interval and controls the number of blasting holes from 2 holes to 15 holes in order to investigate the effect of PPV according to the duration time of the vibration and the number of blasting holes. As a result of analysis, the longer the duration time of the vibration, the longer the delay time which is not interfered from the different blasting holes and the effect regarding the number of blasting holes from inside identical delay time did not appear a lot.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.6-13
• /
• 2011

Multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) with space-time coding (STC) is a promising technology for future wireless communication systems. However, MIMO-OFDM systems are greatly impaired by large cochannel interference (CCI) from the multiple transmitters. In this paper, we propose pre-fast Fourier transform (FFT) multibeamforming based on MMSE(minimizing the mean squared error) for a MIMO-OFDM system to preserves the STC diversity and to remove the CCI. The improvement in bit error rate is investigated through computer simulation of a MIMO-OFDM system in a multipath channel with CCI.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.706-712
• /
• 2009

In this paper, a fault diagnosis method is proposed to detect and classifies faults that occur in press process line. An oil level automatic monitoring method is also presented to detect oil level. The FFT(fast fourier transform) frequency analysis and ART2 NN(adaptive resonance theory 2 neural network) with uneven vigilance parameters are used to achieve fault diagnosis in proposing method, and GUI(graphical user interface) program for fault diagnosis and oil level automatic monitoring using LabVIEW is produced and fault diagnosis was done. The experiment results demonstrate the effectiveness of the proposed fault diagnosis method of induction motors and oil level automatic monitor system.