• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.4
• /
• pp.228-234
• /
• 2001

The present study was an attempt for systematic data conversion between FDM and FEM in order to evaluate the thermal stress distribution during quenching process. It has been generally recognized that FDM is efficient in flow and temperature analysis and FEM in that of stress. But it induced difficulty and tedious work in analysis that one uses both FDM and FEM to take their advantages because of the discrepancy of nodes between analysis tools. So we proposed field data conversion procedure from FDM to FEM in 3-dimensional space, then applied this procedure to analysis of quenching process. The simulation procedure calculates the distributions of temperature and microstructure using FDM and microstructure evolution equations of diffusion and diffusionless transformation. FEM was used for predicting the distributions of thermal stress. The present numerical code includes coupled temperaturephase transformation kinetics and temperature-microstructure dependent material properties. Calculated results were compared with previous experimental data to verify the method, which showed good agreements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1051-1057
• /
• 2010

This paper proposes a method that involves a combination of FDM and FEM for analyzing casting process. At present, many numerical analysis methods such as FDM, FEM, and BEM are used for solving engineering problems. For a given problem, a specific method that is suited to the problem is adopted; in general, FDM or FVM is favored for problems related to fluid flow or heat transfer, and FEM is adopted in stress analysis. However, there is an increasing need for using a combined method for complex and coupled phenomena analysis. Hence, we proposed a method in which FDM and FEM are coupled in three-dimensional space, and we applied this method to analyze casting process. In the proposed method, solidification and heat transfer was analyzed by using FDM. The field data such as temperature distribution were converted into a format suitable for FEM analysis that was used for calculating thermal stress distribution. Using the proposed method, we efficiently analyzed the analysis process from the viewpoints of work and time.

• The Korean Journal of Applied Statistics
• /
• v.30 no.5
• /
• pp.701-717
• /
• 2017

The interest of Korean society and government on future demographic structures is increasing due to rapid aging. Korea's mortality rate is decreasing, but the declined gap is variable. In this study, we compare the Lee-Carter, Lee-Miller, Booth-Maindonald-Smith model and functional data model (FDM) as well as Coherent FDM using non-parametric smoothing technique. We are then examine a reasonable model for projecting on mortality declined rate trend in terms of accuracy of mortality rate by ages and life expectancy. The possibility of using non-parametric techniques for the prediction of mortality in Korea was also examined. Based on the analysis results, FDM and Coherent FDM, which uses the non-parametric technique and reflects the trend of recent data, are excellent. As a result, FDM and Coherent FDM are good fit, and predictability is also excellent assuming no significant future changes.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.468-473
• /
• 2011

Determining the residual stress during casting processes is important for evaluating the mechanical properties and strength of materials and to optimize manufacturing conditions. In this study, we propose a field data interface procedure between FDM and FEM in a 3-dimensional space for analyzing the casting process and structural analysis. The casting process was analyzed using FDM and the data of the temperature distribution were converted into a format suitable for FEM analysis to calculate the thermal stress and safety factor by tightening force. The results of the coupled analysis between FDM and FEM showed that casting residual stress is an important factor in predicting life time and evaluating durability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.477-482
• /
• 2017

When using the FDM to create a 3D object, a thermoplastic filament is heated to its melting point and then extruded layer by layer. Although the FDM printing process has many advantages, its accuracy, and surface finish are not satisfactory. In recent years, much research has been devoted to improving the accuracy of the FDM printing process. The temperature difference between the nozzle and the interior of the chamber of a 3D printer is one of the important parameters affecting the printing process. In this study, we propose a methodology to reduce this temperature difference through design improvement. In addition, we elucidate how this design improvement affects product quality. The FDM printing process is conventionally carried out in a closed chamber. However, in this study, an open heating system is used to reduce the temperature. The FDM printing processes were simulated using FEM analysis.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.27-36
• /
• 2008

This paper analyzed the effects related to the difference of the geometrical shape of the ground excavation by comparing the displacements of the earth retaining wall of the strut resulting from the change of the excavation breadth B and the excavation length L, adopting the three dimensional FDM analysis. It appeared that the displacement of the earth retaining wall of the strut increases in accordance with the increase of L/B and it decreases as it becomes nearer from the center to the comer where the temporary structural system forms, and the wale member is closured because of the effects of the confining effect by the closure of the earth retaining wall and the wale member. This paper proposed a formula in which the results of three dimensional FDM analysis which considers the shape of the excavation plane can be obtained from those of two dimentional FDM analysis which does not consider the shape of the excavation plane. And the results of the formula were compared with those of the site instrumentation analysis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.66-73
• /
• 2021

In this paper, we analyzed and considered the precision of parts produced by 3D printing methods. For the latch systems applied to the Wingline folding doors, the 3D shape of the door hinge part was printed using FDM and DLP methods. Then, the 3D printed shape was scanned to measure the dimensions and dimensional changes of the actual model. In the comparison and analysis of the 3D printed door hinge parts, because the output filling density is 100% owing to the characteristics of DLP 3D printing, the filling density in FDM 3D printing was also set to 100%.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.720-724
• /
• 2000

In this paper, we introduce a seamlessly integrated CAD-based design system (DS) for CAD modeling, engineering analysis, and optimal design which has been developed in CCED at KAIST, The key points of this integrating philosophy are to make full use of a parametric CAD program as the platform of integration and to adopt finite difference method for design sensitivity analysis in optimization process to get robustness and versatility. Design variables are directly selected by clicking CAD model parameters and all the analysis and design activities are menu-driven. This integrated program, named as DS/FDM, runs on Windows NT or Unix and FE analyses are performed at a remote Unix-workstation for multiple users. Application examples include shape optimal design of a belt clip that fits onto a portable electronic device and a bracket to show performance of DS/FDM with shell and tetra solid elements. This software is found efficient and effective fur shape design and size design of engineering structures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.485-492
• /
• 2003

In this study, We peformed on the effective evaluation of slope berm construction using slope stability analysis programs. The effective evaluation of slope berm construction was performed by stability of slope and economy of construction. This time, used slope stability analysis programs are Talren97 that use Limit equilibrium method (LEM) and FLAC-SLOPE that use finite difference method (FDM), and carried out using Rocfall program to evaluate slope stability by rockfall occurrence.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

Purpose : The fascia is the body's largest sensory organ affected by mechanical stimuli such as pressure. Fascial distortion model (FDM) is one of the fascia treatment techniques, and it is based that most musculoskeletal problems are caused by three-dimensional distortion of the fascia. Until now, some studies have been conducted to investigate the effect of FDM, but it is still not enough. In this study, among the six techniques of FDM, trigger band (TB) and cylinder distortion (CyD) were applied to the forearm to investigate the immediate effect on the maximal grip strength, force sense and range of motion. Methods : 22 healthy adults in their 20s and 30s participated. Before and after the application of FDM, maximal grip strength, force sense and range of motion were measured. For analysis, a paired t-test was performed, and the significance level was set to p<.05. Results : After FDM, there were a significant differences that increased the force sense and the range of motion (p<.05). But the maximal grip strength did not show a significant difference (p>.05). Conclusion : The results of this study, the FDM did not affect maximal grip strength, but it was shown to increase the sense of force and range of motion. We assumed that it is the result of the changes in the states of the fascia and changes in the activity of mechanical receptors induced by pressure and stretch from FDM application.