1 |
Kim, H. J. and Kim, N. K., "Dimensional Characteristics according to Internal Density of Automotive Inner Ring in 3D Printing", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 11, pp. 196-102, 2019.
|
2 |
Jang, H. Y. and Park, H. S., "An Experimental Investigation of Liquid Slug - Gas Bubble Flow Characteristics in a Micromixer Manufactured by 3D Printing Technique", Transactions of the Korean Society of Mechanical Engineers - B, Vol. 44, No. 5, pp. 325-300, 2020.
DOI
|
3 |
Lee, S. M., Kim, Y. H. and Eem, J. K., "Support-generation Method Using the Morphological Image Processing for DLP 3D Printers", The Journal of Korean Institute of Information Technology, Vol. 15, No. 12, pp. 165-171, 2017.
DOI
|
4 |
Shin, D. H., Park, Y. M. and Park, S. H., "Correlation between UV-dose and Shrinkage amounts of Post-curing Process for Precise Fabrication of Dental Model using DLP 3D Printer", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 2, pp. 47-53, 2018.
DOI
|
5 |
Moon, J. M., Kim, J. M., Bae, J. M. and Oh, S. H., "Evaluation of acceleration aging effect on the deformity of dental 3D printer products", Korean Journal of Dental Materials, Vol. 44, No. 1, pp. 53-60, 2017.
DOI
|
6 |
Bucci, A., Celata, G. P., Cumo, M., Serra, E. and Zummo, G., "Water Single-phase Fluid Flow and Heat Transfer in Capillary Tubes", ASME 2003 1st International Conference on Microchannels and Minichannels, pp. 319-326, 2003.
|
7 |
Jung, H. S., Park, S. J. and Yoo, J. H., "Analysis of Master Dimensional Shape Error Rate According to Reverse Engineering Technique", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 25, No. 5, pp. 393-399, 2016.
DOI
|
8 |
Lee, J. S. and Huh, J. S., "Study of Textile Structure using 3D Printing -focused on the comparison of FDM and DLP-", The Korean Society of Science & Art, Vol. 31, No. 12, pp. 329-340, 2017.
DOI
|
9 |
Hwang, S. R., Lee, J. W., Lee, S. H., Hong, D. G. and Park, M. S., "Development of DLP 3D Printer with Multiple Composite Materials", Journal of the Korean Society for Precision Engineering, Vol. 37, No. 5, pp. 381-388, 2020.
DOI
|
10 |
Shin, G. S., Kweon, H. K. and Kang, Y. G., "The Influence of Experiment Variables on DLP 3D Printing using ART Resin", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, 12, pp. 101-108, 2017.
DOI
|