• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.254-259
• /
• 2021

고밀도 C4F8 플라즈마에서 증착된 불화탄소막의 광학적 및 전기적 특성을 소스파워와 압력을 변화하며 분석하였다. 고밀도 C4F8 플라즈마에서 증착된 불화탄소막의 F/C 비율은 2단계 증착 메커니즘의 작용으로 소스파워가 증가할수록 증가하였고 압력이 증가할수록 감소하였다. 고밀도 C4F8 플라즈마에서 증착된 불화탄소막의 F/C 비율 변화는 불화탄소막의 광학적 및 전기적 특성 변화에 직접적으로 영향을 끼쳤다. 즉, 불화탄소막의 굴절률은 F/C 비율 변화 양상과는 달리 소스파워가 증가할수록 감소하였고 압력이 증가할수록 증가하였는데 이는 F/C 비율이 증가할수록 전자분극작용이 억제되고 불화탄소막의 망상조직이 약화되어 굴절률이 감소하기 때문이었다. 불화탄소막의 비저항은 F/C 비율 변화와 같이 소스파워가 증가할수록 증가하였고 압력이 증가할수록 감소하였는데 이는 F/C 비율이 증가할수록 주변 전자들을 반발하려는 경향이 강해져서 비저항이 증가하기 때문이었다. 고밀도 C4F8 플라즈마에서 증착된 불화탄소막의 F/C 비율 조절로 불화탄소막의 광학적 및 전기적 특성을 직접적으로 변화할 수 있으므로 불화탄소막이 반도체소자제조공정에서 저 유전상수 물질 대체용으로 가능할 수 있음이 예상된다.

• 상하수도학회지
• /
• 제14권2호
• /
• pp.147-156
• /
• 2000

In this study, the optimal operation parameters of MLE(Modified Ludzack-Ettinger) process treating the liquid supernatant separated from the slurry excreta of swine feedlot was studied as a promising biological treatment process. The nitrogen removal characteristics with different volume ratio between nitrification and denitrification reactor and the operational effect with different nitrogen loading rate, and different C/N($COD_{Cr}/TKN$) ratio were investigated. Based on the laboratory results, pilot MLE plant was operated to examine the effect of ambient temperature for five months including winter. The denitrification reactor which is 20% of total volume was proposed as the most optimal volume fraction for nitrification and denitrification. The optimum ratios of F/M and $F_N/M$ were increased with increase of the C/N ratio. However, optimum F/M ratio was changed more rapidly than $F_N/M$ ratio with increase of the C/N ratio. Therefore, MLE process is desirable to be controlled by F/M ratio in the range of high C/N ratio and by $F_N/M$ ratio in the range of low C/N ratio. Pilot MLE plant showed the higher removal efficiencies of COD and TKN in winter than in summer and was operated most stably at the temperature of $20{\sim}25^{\circ}C$ for mixed liqour.

• 핵의학기술
• /
• 제23권1호
• /
• pp.69-74
• /
• 2019

$^{18}F$-FDOPA는 뇌 종양의 아미노산 대사를 추적하는 방사성 의약품이다. 본 연구의 목적은 뇌 종양의 아미노산 대사를 영상화 하여 악성 종양을 진단하는 $^{18}F$-FDOPA와 포도당 대사를 통한 $^{18}F$-FDG의 Brain PET/CT 검사 영상의 대조도 분석을 통해 병변의 검출 능력을 비교하고, $^{18}F$-FDOPA Brain PET/CT 검사에서 섭취 시간에 따른 SUV의 변화를 분석하여 최적의 영상 획득 시간을 알아보기 위함이다. $^{18}F$-FDOPA 와 $^{18}F$-FDG 두 영상에서 종양(Tumor)과 소뇌(Cerebellum)의 중심에 각각 약 $350mm^2$의 관심 영역을 설정하여 $SUV_{max}$를 측정하였고, 종양과 소뇌의 $SUV_{max}$ 비율(T/C ratio)을 산출하였고, $^{18}F$-FDOPA 투여 직후 30분 동안 획득한 리스트 수집 방식 데이터(List mode data)를 활용해 2분씩 15프레임으로 나눈 뒤 각 프레임 별로 종양과 소뇌 중심에 $SUV_{max}$를 측정하여 위와 동일한 방법으로 T/C ratio를 산출하여 분석하였다. 종양의 평균 $SUV_{max}$를 비교해 본 결과, $^{18}F$-FDOPA Brain PET/CT 검사에서 $4.2{\pm}0.8$, $^{18}F$-FDG Brain PET/CT 검사에서는 $5.6{\pm}0.7$ 이었다. 또한, T/C ratio는 $^{18}F$-FDOPA 검사에서 $2.1{\pm}0.7$, $^{18}F$-FDG 검사에서는 $1.1{\pm}0.4$ 이었으며, $^{18}F$-FDOPA의 $SUV_{max}$는 $^{18}F$-FDG보다 낮지만 T/C ratio는 높게 나타나 종양 구별 능력이 더욱 뛰어난 것을 알 수 있었다(t=-5.214, p=0.000). $^{18}F$-FDOPA의 섭취 시간에 따른 $SUV_{max}$와 T/C ratio를 분석한 결과, $SUV_{max}$와 T/C ratio의 Peak는 모두 6~8분에서 나타났다. 이를 토대로 본원에서 $^{18}F$-FDOPA Brain PET/CT 검사에서 활용하는 10~30분의 영상과 Peak가 나타나기 시작한 6~26분의 영상을 비교한 결과 SUV와 T/C ratio가 각각 0.2, 0.1 증가하였다. 추후 지속적인 연구를 통해 검사 소요시간의 단축 가능성과 추가적인 스캔 정보 활용을 통한 정확한 진단에도 도움이 될 것으로 사료된다.

• 한국지능시스템학회논문지
• /
• 제12권6호
• /
• pp.583-588
• /
• 2002

Recently, Szmidt and Kacprzyk[Fuzzy Sets and Systems 118(2001) 467-477] proposed a non-probabilistic-type entropy measure for intuitionistic fuzzy sets. Tt is a result of a geometric interpretation of intuitionistic fuzzy sets and uses a ratio of distances between them. They showed that the proposed measure can be defined in terms of the ratio of intuitionistic fuzzy cardinalities: of $F\bigcapF^c and F\bigcupF^c$, while applying the Hamming distances. In this note, while applying the Euclidean distances, it is also shown that the proposed measure can be defined in terms of the ratio of some function of intuitionistic fuzzy cardinalities: of $F\bigcapF^c and F\bigcupF^c$.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
• /
• pp.13-16
• /
• 2002

Recently, Szmidt and Kacprzyk[Fuzzy Sets and Systems 118(2001) 467-477] Proposed a non-probabilistic-type entropy measure for intuitionistic fuzzy sets. It is a result of a geometric interpretation of intuitionistic fuzzy sets and uses a ratio of distances between them. They showed that the proposed measure can be defined in terms of the ratio of intuitionistic fuzzy cardinalities: of F∩F$\^$c/ and F∪F$\^$c/, while applying the Hamming distances. In this note, while applying the Euclidean distances, it is also shown that the proposed measure can be defined in terms of the ratio of some function of intuitionistic fuzzy cardinalities: of F∩F$\^$c/ and F∪F$\^$c/.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권6호
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.126-135
• /
• 1997

$H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 This study was performed to investigate the influence of fuel/oxygen ratio (F/O=3.2, 3.0, 2.8) on the characteristics and the oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%NiCr coatings. Decomposition and the oxidation of the $Cr_3C_2$was occured during spraying. The degree of transformation from $Cr_3C_2$to $Cr_7C_3$ was increased with decreasing the F/O ratio. The microstructural differences of the as sprayed coating with F/O ratio can not be distinguished, However, large pores were diminished and then the coatings became dense by heat treatment. Microhardness of the as-sprayed specimen which sprayed with F/O=3.0 condition was hightest ($Hv_{300}$=1140) and the hardness was increased to 1500 after heat treatment at $600^{\circ}C$ for 50hrs in air. It was supposed that hardness was increased due to the formation of $Cr_2O_3$ within $Cr_3C_2$/$Cr_7C_3$matrix and the densification of coating layer during heat treatment. Apparent activation energy for oxidation was varied from 21.2 kcal$mol^{-1}K^{-1}$ to 23.8 kcal$mol^{-1}K^{-1}$ with respect to the F/O ratio. The surface morphology was changed to porous and oxide chusters were grown after oxidation $1000^{\circ}C$ for 50 hours by the aggressive evolution of gas phase ($CrO_3$ and$CO_2$). The oxide cluster was composed of Ni and Cr.

• 한국식물병리학회지
• /
• 제13권1호
• /
• pp.46-56
• /
• 1997

Based on the principal component analysis (PCA) of Richards' parameter estimates, ginseng field soils were grouped as the principal component 1 (PC1) and the principal component 2 (PC2). The microflora and physico-chemical characteristics of each soil group were compared to elucidate soil environmental factors affecting the disease development of root rot of ginseng seedling. Among 3 soil groups by PC1, there were differences in the populations of total fungi (TF) and Cylindrocarpon plus Fusarium (C+F), and the population ratio of Cylindrocarpon plus Fusarium to total fungi or total bacteria (C+F/TF, C+F/TB) in rhizoplane of ginseng seedlings, the population of total actinomycetes (TA) and the population ratio of total Fusarium to total actinomycetes (Fus/TA) in soil, and soil chemical properties (EC, NO3-N, K, Mn, ect.). Among 4 soil groups by PC2, there were differences in TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane, Trichoderma plus Gliocladium (T+G) in soil, and P2O5 content in soil. Especially, EC, NO3-N, K, K/Mg and Mn were positively correlated to PC1, and TA was negatively to PC1; however, TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane were significantly correlated to PC2 positively. On the other hand, microbes in the rhizoplane were not significantly correlated to the stand-missing rate (SMR), although TA and Fe/Mn were negatively correlated, and pH and Ca were positively correlated to SMR.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.63-72
• /
• 2008

As a part of abating formaldehyde emission of urea-formaldehyde (UF) resin adhesive, this study was conducted to investigate chemical structures of UF resin adhesives with different formaldehyde/urea (F/U) mole ratios, using carbon-13 nuclear magnetic resonance ($^{13}C$-NMR) spectroscopy. UF resin adhesives were synthesized at four different F/U mole ratios such as 1.6, 1.4, 1.2, and 1.0 for the analysis. The analysis $^{13}C$-NMR spectroscopy showed that UF resin adhesives with higher F/U mole ratios (i.e., 1.6 and 1.4) had two distinctive peaks, indicating the presence of dimethylene ether linkages and methylene glycols, a dissolved form of free formaldehyde. But, these peaks were not detected at the UF resins with lower F/U mole ratios (i.e., 1.2 and 1.0). These chemical structures present at the UF resins with higher F/U mole ratios indicated that UF resin adhesive with higher F/U mole ratio had a greater contribution to the formaldehyde emission than that of lower F/U mole ratio. Uronic species were detected for all UF resins regardless of F/U mole ratios.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.279-284
• /
• 2013

암모니아수 또는 트리에틸아민(TEA)을 촉매로 사용하여 페놀과 포름알데히드로부터 구형 페놀수지를 페놀:포름알데히드=1:1~1:4의 몰 비로 $98^{\circ}C$에서 현탁중합을 통해 합성하였고, 이를 $700^{\circ}C$의 질소 환경에서 탄화시켜 구형 탄소입자를 형성하였다. 현탁중합으로 형성된 구형 페놀수지의 열적 특성으로부터 후경화가 필요함을 확인하였다. 현탁중합의 최적조건을 결정하기 위하여 페놀/포름알데히드(P/F)의 몰 비, 촉매의 pH, 안정제의 분자량이 구형 페놀입자의 크기와 수율에 미치는 영향을 나머지 변수를 고정시킨 상태에서 조사하였다. P/F 몰 비에 따라 형성되는 입자 크기는 증가하는 반면 수득율은 감소하는 것을 확인하였고, 촉매의 pH가 클수록 큰 입자가 형성되며, 또한 안정제의 분자량은 입도분포보다는 수득율에 더 큰 영향을 미치는 것을 확인하였다. 또한 후경화를 거쳐 얻어진 구형 페놀수지의 열안정성을 TGA를 통하여 조사하였으며, P/F 몰 비가 높은 경우는 dibenzyl ether의 존재로 인하여 후경화 이후에도 $220^{\circ}C$의 중량감소가 여전히 존재하며, 반면에 P/F 몰 비가 낮은 경우는 $220^{\circ}C$ 이후 $400^{\circ}C$에 걸쳐 꾸준한 중량감소가 일어나는 것으로부터 P/F 몰 비가 1:2인 경우가 열안정성이 가장 우수함을 확인하였다.