• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.263-274
• /
• 2018

In this study, the applicability and external/internal stability of a MSEW abutment with a slab were investigated. Structural analysis of slab bridges between 10 ~ 20.0 m and thicknesses of 0.7 ~ 0.9 m was carried out to calculate the reaction forces due to dead and live loads acting on the bridge supports. The slab bridge with a length of 20.0 m satisfied the allowable contact pressure of 200 kPa for the true MSEW abutment. Because the external stability of the true MSEW abutment was dominated by the geometry of the MSE wall, the change in the factor of safety due to the load of the super-structure is small. Because the stiffness of the foundations is fixed and the load of the super-structure is increased, the factor of safety of the bearing capacity was reduced. As the load of the super-structure was increased, the horizontal earth pressure of the true MSEW abutment increased greatly. As a result, the pullout and fracture of the uppermost reinforcement, which are the factors of safety, did not meet the design criteria. Therefore, it is necessary to increase the pullout resistance and the long-term allowable tensile force of the reinforcement placed on the top of the reinforced soils to ensure efficient design and performance of a true MSEW abutment.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.39-46
• /
• 2010

The past studies on reinforced earth retaining wall have been mostly focused on the internal and external failure of reinforced earth retaining wall, and the research for external impact was limited on earthquake. However, the potential external impact such as vehicle collision to reinforced earth retaining wall near the road are increasing with development of roads. Therefore, in this study, the reinforced earth retaining wall was modeled by using LS-DYNA, which is a general purpose finite element program recognized for its reliability. The behavior of reinforced earth retaining wall by vehicle speed was analyzed with Ford single unit truck offered by NCAC (National Crash Analysis Center), which is 8 tons weight. In addition, in order to obtain stability of reinforced earth retaining wall for vehicle collision, the gravity retaining wall was applied at the bottom of reinforced earth retaining wall. With varying the height of retaining wall (0.5m, 1.0m, 1.5m), the numerical study was performed to analyze the stability and behavior of reinforced earth retaining wall.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.28-34
• /
• 1998

Polyvinyl acetate emulsion has been widely used as adhesives for wood and paper, paint additives and binders for fiber, leather, and other materials because it is an excellent adhesive with many advantages including low in toxicity risks and manufacturing cost. It is expected the consumption of polyvinyl acetate emulsion as adhesives will increase in cigarette industry as well as in paperboard coating industry. Recently the operation speed of the cigarette tip wrapper increased so substantially that improvement of the emulsion properties is required including good wet tack development, narrow and controlled particle size distribution, low viscosity, etc. In this study the effects of such polymerization conditions as the type and amount of emulsifier, internal or external plasticizing, and emulsification methods on the viscosity and particle size of polyvinyl acetate emulsions were examined. Results showed that polyvinyl alcohol with a high degree of hydrolysis and low molecular weight and nonionic surfactants are superior to anionic surfactant in improving adhesion and emulsion stability. They also tend to produce emulsions with smaller particle size. External plasticization with dipropylene glycol dibenzoate was more effective in improving flexibility than internal plasticization with butyl acrylate. Monomer emulsification under high shear was more effective in decreasing the particle size.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2022

Objective: This study aimed to investigate the effect of the application of abdominal brace techniques on muscle activity of the trunk and lower extremities when walking. Design: Cross-sectional study Methods: This study was conducted on 26 healthy adults in their 20s, and the subjects performed two conditions in random order: walking with the abdominal bracing technique and walking in an abdominal relaxation state (normal gait). Muscle activity was measured on the dominant side of all subjects using surface electromyography, and the attachment sites were the erector spinae, external oblique, internal oblique, vastus lateralis, and vastus medialis oblique muscles. Each condition was measured three times to calculate and analyze the average value. Results: When walking using the abdominal brace technique, the muscle activity of the erector spinae, external oblique, internal oblique, and vastus lateralis increased significantly (p<0.05), and the muscle activity of the vastus medialis increased as well but was not significant. Conclusions: The results of this study indicate that it is possible to be used as an effective guide to increasing the muscle activity and stability of the trunk and lower extremities through the application of the abdominal bracing technique during walking.

• Journal of architectural history
• /
• v.19 no.4
• /
• pp.21-34
• /
• 2010

Through investigating the effects that result from the form and preference of Ahnsan (案山) and Jusan(主山) symbolizing ground in the cases of 21 of the Korean Academics for classical learning which called Seowon(書院) located in South Korea of the whole 47, to layout the Korean Academics for classical learning, what factor Sarim(士林) preferred to and how they analyzed the form of circumjacent mountains by Fengshui. While the Jusan has intrinsic attribute due to connecting with the place, Hyuljang(穴場), the Ahnsan has public and extrovert. It can be explained that the Sarim who established the Korean Academics for classical learning had their internal hope and external justification. To put it concretely, because of their necessity of concentrating on their study within nature and their situation as hermits apart from government through long time, they made the Korean Academics for classical learning stable and satisfactory. Therefore, they had to choose Moogocksung(武曲星) as a Jusan. And their study was essential method to take their justification. And It was attractive for them to be a public officer by their study. So they preferred to Moonpilbong(文筆峯) symbolizing their achievements on their study. So the layout of the Korean Academics for classical learning tells us that the Sarim sought internal stability and external scholarship.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.590-596
• /
• 2012

This paper proposes SERO note system which supports collaborative learning between teachers and learners by using the learner's internal and external environment information. The proposed system defines the learner's internal environment depending on desire for relearning assessment questions, and the learner's external environment depending on a percentage of correct answers. The purpose of educational evaluation through SERO typing of each question is reflected in collaborative learning between teachers and learners. As the results of SERO typing of each question are accumulated on DB and used, a variety of feedback chances can be offered to teachers and learners.

• The Journal of Korean Physical Therapy
• /
• v.27 no.4
• /
• pp.196-200
• /
• 2015

Purpose: The purpose of this study was to examine the muscle activity of the trunk muscles during balance exercises on a stable and unstable surface in patients with stroke. Methods: Thirteen subjects (8 males, 5 females) with stroke were enrolled in the study. Muscle activity was recorded using surface EMG electrodes from the affected side of the erector spinae, external oblique, and internal oblique muscles. The exercise was performed under three conditions. For the first condition for balance exercise, subjects were instructed to sit on an exercise mat with legs extended. The second condition was to sit with legs extended, with a balance pad under their buttocks. The third condition was to sit with legs extended, have a balance pad under the buttocks and a balance cushion under the lower legs. Results: This study showed significant differences in EMG activities during both arm lifting exercise and weight shifting exercise between conditions. This study showed that the EMG activities of the erector spinae, external oblique, and internal oblique muscles were significantly higher when the trunk exercise was performed using the balance pad with balance ball than when using the stable surface. Conclusion: In conclusion, performing balance exercises using an unstable surface is a useful method for facilitating trunk-muscle strength and hence trunk stability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.385-393
• /
• 2009

Statement of problem: High stress concentration on the crestal cortical bone has been regraded as a major etiologic factor jeopardizing long term stability of endosseous implants. Purpose: To investigate if the design characteristics of crestal module, i.e. internal type, external type, and submerged type, affect stress distribution on the crestal cortical bone. Material and methods: A cylindrical shaped implant, 4.3 mm in diameter and 10 mm in length, with 3 different crestal modules, i.e. internal type, external type, and submerged type, were analysed. An axisymmetric scheme was used for finite elment formulation. A vertical load of 50 N and an oblique load of 50N acting at $45^{\circ}$ with the implant's long axis was applied. The peak crestal bone stress acting at the intersection of implant and crestal bone was compared. Results: Under vertical load, the crestal bone stress was high in the order of internal, external, and submerged types. Under the oblique loading condition, it was in the order of internal, submerged, and external types. Conclusion: Crestal module design was found to affect the level of the crestal bone stresses although the actual amount was not significant.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.107-113
• /
• 2021

PURPOSE: Selective strengthening of the transverse abdominis muscle (TrA) during abdominal hollowing makes an important contribution to the stability and control of the spine. This study examined the effects of abdominal hollowing exercise (AHE) according to the visual feedback method on the external oblique, internal oblique, and transverse abdominis muscles. METHODS: Twenty healthy subjects were assigned randomly to an AHE with visual feedback from real-time ultrasound image (group A, n = 10), AHE with visual feedback with pressure biofeedback unit (group B, n = 10). Both groups underwent 20 min of AHE with visual feedback once daily, five days/week for two weeks. The changes in the muscle thickness of the TrA, internal oblique abdominal muscle (IO), and external oblique abdominal muscle (EO) were measured by ultrasonography. RESULTS: The thickness of TrA was changed significantly in both groups (p < .05). However, the lowest minimal detectable changes were achieved in Group A. The thickness of the IO and EO muscles in group A was changed significantly, but there were no significant changes in group B. CONCLUSION: Both visual feedback methods were effective for strengthening the TrA muscles selectively. Nevertheless, AHE with visual feedback using real-time ultrasound images may be more useful in trA muscle contraction.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.15-24
• /
• 1989

The transport of Chromium(Vl) ion from waste water throughl the liquid surfactant membrane containing tri-n-octylamine as a carrier, was analyzed by a slab model and was investigated through experiments. For the experiment of membrane stability, concentrations of surfactant and liquid parafnn oil were analyzed. Extraction euperiments were carried out to observe the effect of system variables, such as stirring speed, concentration of carrier, and NaOH in internal aqueous phase, and concentrations of H$_2$SO$_4$and initial chromium(VI) ion in external aqueous phase at $25^{\circ}C$. It is concluded that the most stable formation of liquid membrane emulsion was obtained when surfactant concentration is above 3 wt. ％ and liquid parafnn oil concentration is 50 vol. ％. The transport of chromium(VI) ion in bacth extractor increased with increasing carrier concentration, the volume ratio of emulsion to external aqueous phases, and initial concentration of chromium(VI) ion under the optimum stirring speed of chromium(VI) ion below 2 ppm. The theoretical equation on the transport of chromium(Vl) ion agreed well with the experimental results.