• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.271-282
• /
• 2021

This study aims to understand the opening efficiency of the finless porpoise escape guide net by the type of extension net that is the part to which the escape guide net is attached in stow net. To this end, extension nets were manufactured in full size and the net mouth area and towing tension were investigated according to the towing speed (0.2, 0.4, 0.6 and 0.8 m/s) and the type of extension net (25 mm net and raschel net) in the water tank. As a result, the net mouth area of the guide net was larger when the raschel net was used for the extension net than when the 25 mm net was used under all towing speeds. In addition, regardless of the type of extension net, the net mouth area reached about 80% of the maximum value at a towing speed of 0.4 m/s. In the field, fishing operation of stow net is performed only when the current speed is above 0.4 m/s. Therefore, the speed of 0.4 m/s was confirmed as a meaningful value to determine whether it is possible to operate. As a result of analyzing the relationship between the net mouth area of the guide net and the towing tension, it was confirmed that the difference in the net mouth area of the guide net according to the type of the extension net was due to the difference in the solidity ratio.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.101-105
• /
• 2006

This was performed to improve the working conditions of oyster mushroom cultivation on bed using rice straw of which binding and cutting procedure need a lot of time. There was a little difference in physiochemical components between rice straw and cotton waste C/N ration of cotten waste was, however, similar to rice straw as 84-85. If is feasible to use as substrate material. The average yield of a net was 1450g in six frustration harvest, when the size of an onion net was $35{\times}30cm$, mixture ratio of rice straw to cotton waste was 40:60(V/V). Cultivation method using an onion net saved 3 days for preparation, 4 hours for inoculation compared to normal bed cultivation. This method was analysed to give 5% economical benefit.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.537-547
• /
• 2014

In this paper, the ALT (ALTernative) board and a NetLogo extension module are developed for the active participatory simulation (APS) learning. Through the participatory simulation with HubNet each student can attend the experiment as one of clients. Only one HubNet server, however, is able to use an external device so that the bifocal modeling based learning with multiple users is impossible. In order to overcome the drawback, and enable clients participate into the experiment and collect the experimental data and the measured data, an ATmega 32 based board and its firmware are developed. In addition, Java extension module based on TCP/IP socket interfaces is developed to exchange the data with HubNet server. Finally, we show some NetLogo program examples to use the developed hardware and software for APS and seek the way to use them for science education.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.22-29
• /
• 1988

In order to investigate the shearing efficiency of the Danish sein net using in the sea area of korea, the autors carried out a models of prototype net, and the nets on which the canvas attached to the rear part of the square and to the extension wing of the prototype net, respectively. The model net is made of scale of 1/35 according to Tauti's Law of similarity on fishing gear. The result obtained are as follows: 1. The hydrodynamic resistance increased the maximum 30% in case of the canvas attached to the square, and decreased the maximum 35% in case of the canvas attached to the extension wing in comparison with prototype net. 2. The height of net mouth increased the maximum 12% in case of the canvas attached to the square, and decreased the maximum 5.8% in case of the canvas attached to the extension wing in comparison with prototype net. 3. The width of net mouth decreased the maximum 4% in case of the canvas attached to the square, and increased the maximum 8.4% in case of the canvas attached to the extension wing in comparison with prototype net. 4. The projective area of net mouth increased the maximum 13.6% in case of the canvas attached to the square and increased the maximum 11.8% in case of the canvas attached to she extension wing in comparison prototype net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.368-377
• /
• 2014

Small yellow croaker is one of the important stocks in Korean waters. In this study, we conducted sea trials to estimate optimum height of a drift gill net for effective fishing of small yellow croaker. In the trial using existing net which has 9.2m in height, there was 22 species (1,180 fishes, 99.9kg) caught. The catch (in individuals) of small yellow croaker, especially larger fishes (over 22cm in FL), was higher as part of net height is higher, while the number of species bycaught and the catch of those species were higher as part of net height is lower. In the trial using extension net which has 18.4m in height, there was 27 species (2,030 fishes, 151.7kg). It showed same pattern with existing net in the section I to III, however, in the section IV which is over 13.8m of net height, the catch sharply decreased. The number of species bycaught and the catch of those species using extension net were also same as results using existing net. It showed that section III (9.2-13.8m) where is upper-middle part of the net has caught most of catch and large fishes having over 22cm in length. Through these results, it is judged that the setting depth of the net where is 4.6-13.8m above the sea bottom is the best to reduce bycatch and catch much more large size fishes, and the catch per net is proportional to filtering area of net. Therefore the Fisheries Resource Management Act (the clause 1, article 10) on the amount of usage for offshore drift gill net need to be considered not only length of a net but also net height.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.2
• /
• pp.27-36
• /
• 2021

Background : Prone hip extension (PHE) is commonly used for exercises and tests in patients with low back pain. Previous studies have shown that pelvic compression belts (PCB) and non-elastic taping (NET) contribute greatly to improvements in lumbopelvic stability. This study aimed to compare the effect of two lumbopelvic stability methods such as PCB and NET on the trunk and hip extensor muscle activities during PHE tests. Methods: Subjects who experienced low back pain (low back pain group, LBPG; n=20) and those who did not experience low back pain (non-LBPG; n=20) participated in this study. The subjects were instructed to perform PHE with and without a PCB and NET. PHE tests were performed in the condition wherein the two stabilization methods were applied, and the actions of the muscles at that time were measured using surface electromyography (EMG). EMG data were collected from the hamstring, gluteus maximus, erector spine (ES), and multifidus (MF) muscles. The data were collected three times for 5 s with a 1-min rest between each of the three sets. Results: In the LBPG, EMG of the ES muscle was significantly reduced when NET or a PCB was applied (p<.05). There was no difference in the change in the ES muscle activity when NET and a PCB were applied. The ratio of MF/ES muscleactivity showed a significant increase in the LBPG with NET (p<.05). Conclusion: Both NET and PCB applied to subjects who experienced low back pain significantly reduced the ES muscle activity during PHE exercises and helped control the balance of the superficial and deep trunk extensor muscles.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.485-496
• /
• 2022

This study is for the software implementation to generate atmospheric and surface reflectance products from RapidEye satellite imagery. The software is an extension based on Orfeo Toolbox (OTB) and an open-source remote sensing software including calibration modules which use an absolute atmospheric correction algorithm. In order to verify the performance of the program, the accuracy of the product was validated by a test image on the Radiometric Calibration Network (RadCalNet) site. In addition, the accuracy of the surface reflectance product generated from the KOMPSAT-3A image, the surface reflectance of Landsat Analysis Ready Data (ARD) of the same site, and near acquisition date were compared with RapidEye-based one. At the same time, a comparative study was carried out with the processing results using QUick Atmospheric Correction (QUAC) and Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) tool supported by a commercial tool for the same image. Similar to the KOMPSAT-3A-based surface reflectance product, the results obtained from RapidEye Extension showed accuracy of agreement level within 5%, compared with RadCalNet data. They also showed better accuracy in all band images than the results using QUAC or FLAASH tool. As the importance of the Red-Edge band in agriculture, forests, and the environment applications is being emphasized, it is expected that the utilization of the surface reflectance products of RapidEye images produced using this program will also increase.

• The Korean Journal of Ecology
• /
• v.21 no.4
• /
• pp.329-335
• /
• 1998

The growth of Phytolacca L. grown under three light regimes at three nutrient concentrations was analyzed. The effect of shading treatment on plnat growth was greater than that of nutrient treatment. Plant dry mass increased more than 5-fold during 21 days under 33% and 100% irradiances, whereas that was strongly reduced under 8% irradiance. Net assimilation rate decreased with plant growth irrespective of light and nutrient treatments, though the highest net assimilation rate was shown under 100% irradiance. Under 33% irradiance leaf area in plants supplied with nutrient solution increased to such extent as to compensate reduction in net assimilation rate, whic maintains almost identical growth rate with that under 100% irradiance. The relatonship between total plant nitrogen and leaf nitrogen content was dependent on the growth irradiance. Moreover, leaf nitrogen and specific leaf weight were also changed depending on the light and nutrient conditions. Based on these findings, it is suggested that the adaptive characteristics of Pokeberry plant to light and nutrient conditions may contribute to rapid extension of Pokeberry habital in Korea rocently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.4
• /
• pp.151-155
• /
• 1982

Petri ant is employed to analyze the coneurrent system and to make it into a model. But the faculty of Petri net is limited. Therefore in this thesis a Petri net of which restricted edge and capacity are extended is proposed in order to improve the modeling faculty. This paper also proves that the algorism which I have designed, can be transformed into a general Petri net for improving the analytic power of the expanded Petri net. Through explanatory examples i have also shown the usefulness of the algorism.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.449-461
• /
• 2021

Analysis Ready Data (ARD) for optical satellite images represents a pre-processed product by applying spectral characteristics and viewing parameters for each sensor. The atmospheric correction is one of the fundamental and complicated topics, which helps to produce Top-of-Atmosphere (TOA) and Top-of-Canopy (TOC) reflectance from multi-spectral image sets. Most remote sensing software provides algorithms or processing schemes dedicated to those corrections of the Landsat-8 OLI sensors. Furthermore, Google Earth Engine (GEE), provides direct access to Landsat reflectance products, USGS-based ARD (USGS-ARD), on the cloud environment. We implemented the Orfeo ToolBox (OTB) atmospheric correction extension, an open-source remote sensing software for manipulating and analyzing high-resolution satellite images. This is the first tool because OTB has not provided calibration modules for any Landsat sensors. Using this extension software, we conducted the absolute atmospheric correction on the Landsat-8 OLI images of Railroad Valley, United States (RVUS) to validate their reflectance products using reflectance data sets of RVUS in the RadCalNet portal. The results showed that the reflectance products using the OTB extension for Landsat revealed a difference by less than 5% compared to RadCalNet RVUS data. In addition, we performed a comparative analysis with reflectance products obtained from other open-source tools such as a QGIS semi-automatic classification plugin and SAGA, besides USGS-ARD products. The reflectance products by the OTB extension showed a high consistency to those of USGS-ARD within the acceptable level in the measurement data range of the RadCalNet RVUS, compared to those of the other two open-source tools. In this study, the verification of the atmospheric calibration processor in OTB extension was carried out, and it proved the application possibility for other satellite sensors in the Compact Advanced Satellite (CAS)-500 or new optical satellites.