• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.122-127
• /
• 2016

Thermal decomposition kinetics for two different types of polyurethane elastomers prepared with 2,2'-dichloro-4,4'-methylenedianiline (MOCA) and 3,5-dimethyl-thiotoluenediamine (Ethacure-300), based on PTMG/TDI isocyanate prepolymer, were studied using non-isothermal thermogravimetric analysis (TGA). Thermograms were obtained and analyzed using Friedman (FR) and Kissinger-Akahira-Sunose (KAS) methods for activation energy, $E_a$. The results obtained showed that decomposition reaction of both samples was observed similarly to occur through three different stages, i.e., initial stage with vaporization of low molecular weight materials, second stage of urethane linkage decompositions, and later stage of polyol segment decompositions. However, activation energy values at each stage for the sample cured with Ethacure-300 was much lower than those for the sample with MOCA, exhibiting relatively lower thermal stability for the sample with Ethacure-300 than that with MOCA.

• Journal of Veterinary Clinics
• /
• v.17 no.2
• /
• pp.420-430
• /
• 2000

These studies were preformed to investigate the freezing conditions to achieve good post-thaw viability of spend and the practical methods of artificial insemination frozen canine semen. Semen were collected from nine male dogs which had been proved to be fertile in the past and the semen were treated for freezing procedure. Post-thaw motility and viability of canine sperm were evaluated to investigate individual tolerance of freezing, difference among freezing extenders, dif-ference among freezing equipments and freezing conditions, difference between fast and slow cooling rate, difference according to different glycerol concentration, effect of seeding on post-thaw viability, difference according to cutting part of straw, difference according to thawing temperatures, and dif-ference according to media added to thawed semen. Thawed semen for insemination were added with equal volnme of canine capacitation medium (CCM) and the volume of semen and the number per insemination were adjusted as 2-3 ml and $20-30 {\times}10^7,$ respectively. The semen were inseminated in vagina using balloon catheter and en17ryos were cellected from 9 to 11 days after the second Al to d determine fertilization.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.486-494
• /
• 2006

In order to protect the spermatozoa against cold shock, hen egg yolk is widely used as a cryoprotective agent in semen freezing extenders for domestic animals. The protective action of yolk is largely presumed to be due to low density lipoproteins (LDL). The effects of LDL on sperm quality of bull and northern pike (Esox lucius) after freezing-thawing have been reported, but no study has been made to evaluate the effect of LDL on boar sperm motility and other characteristics. The experiment was carried out to investigate the effect of LDL on the freezing of boar sperm in 0.25 ml straws. The aim was to evaluate the quality of boar spermatozoa cryopreserved in the presence of LDL. Motility of semen cryopreserved in LDL was analyzed and compared to semen cryopreserved with Tris-citric acid-glucose (TCG) and Tris-citric acid-fructose (TCF), two basic freezing extenders containing egg yolk. Similarly, acrosome and plasma membrane integrity were also evaluated and compared to semen cryopreserved with TCG and TCF. Analysis of sperm quality after freeze-thaw showed that the motility, acrosome and plasma membrane integrity were improved with LDL in the extender, as compared to the TCG and TCF. The highest post-thaw integrity of acrosome and plasma membrane and motility were obtained with 9% LDL (w/v). Consequently, the optimum LDL concentration in the extender was 9%. It is also suggested that the concentration of LDL addition is important for the effect on boar sperm protection during freezing and thawing. The percentage of motile spermatozoa was significantly higher after freezing in 9% LDL than in TCG and TCF 54.4% versus 30.4% and 30.1% (p<0.05), respectively. The integrity of acrosome and plasma membrane were also significantly higher at 70.3% and 50.5% respectively with semen frozen in 9% LDL extender compared to TCG at 37.8% and 30.3% and TCF at 36.4% and 29.9%, respectively (p<0.05),. In conclusion, we propose that extender containing LDL extracted from hen egg yolk could be used as a cryoprotective media with a better efficiency than TCG and TCF. LDL improved boar semen quality, allowing better spermatozoa motility, acrosome and plasma membrane integrity after the freeze-thaw process. Furthermore, we found out that the extender with 9% LDL concentration significantly enhanced motility, acrosome and plasma membrane integrity of boar sperm after freezing and thawing.

• Journal of Marine Life Science
• /
• v.8 no.2
• /
• pp.115-120
• /
• 2023

This study aims to find out a suitable extender and cryoprotective agent (CPA) for cryopreservation and its optimum concentration in order to conduct planned artificial seed production of Korean bullhead Pseudobagrus fulvidraco and to preserve superior sperm. Experiments were designed to investigate the effects of the different combinations of three extenders (I: 300 mM glycose, II: Kurokura extender, III: Li extender), four cryoprotectants (dimethyl sulfoxide, ethylene glycol, methanol and glycerol) and four concentrations (5, 10, 15, 20%) on the cryopreservation of Korean bullhead sperm. Postthawed sperm survival rate and sperm activity index (SAI) were detected to evaluate the effects of sperm cryopreservation. The optimal combination of extender and CPA for cryopreservation of Korean bullhead sperm was extender III + 10 and 15% methanol, resulting in a survival rate and SAI of 66.9 ± 8.7, 67.3 ± 13.1% and 2.6 ± 0.4, 2.6 ± 0.5 respectively, which was higher than had been achieved with other extenders and CPAs.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.25-36
• /
• 2017

This study worked on the synthesis of waterborne polyurethane/epoxy hybrid resins containing aminosilane compound to replace conventional phenol resins used for a coating material for loudspeaker dampers, which are not harmful to human being. Waterborne polyurethane resins were synthesized from two diisocyanate of 4,4'-diphenylethane diisocyanate and toluene diisocyanate, two polyols of polyester polyols(PEP), polycarbonatediol(PCD), including and anionic center of dimethylol butanoic acid, a chain extenders of ethylenediamine(EDA), and a neutral agent of triethylamine. Synthesized polyurethane resins and commercially available bisphenol A type waterborne epoxy resin were blended in weight ratios of 80:20 to prepare polyurethane/epoxy hybrid resins. The synthesized waterborne polyurethane/epoxy hybrid resins were reacted with aminosilane compound to improve mechanical properties. Aminosilane-treated polyurethane /epoxy hybrid resins showed better mechanical properties.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.28-32
• /
• 1976

This study was carried out to know the adaptability of barley flour, potato flour and white ash as extender and filler of urea-formaldehyde resin for plywood as a substitute material of wheat flour. The extenders and filler used at this study were extended by several groups of percentages. Shear strength, moisture contents, and specific gravities were compared among tested groups. The results obtained are summarized as follows. 1) Wet and dry shear strength of plywoods extended by 10% barley flour, 30% potato flour, and wheat flours were shown better results than non extended plywoods. 2) There was no significant difference between plywoods extended until 50% barley flours and non extended plywoods. 3) Shear strength of plywoods extended by 50% potato and 100% barley flours were shown worse result than non extended. 4) Dry and wet shear strength of plywoods extended by white ash were shown worst result. 5) The plywoods extended by potato flours were shown not only better shear strength, but also considered more profitable cost for extending.

• Journal of Nutrition and Health
• /
• v.6 no.1
• /
• pp.47-52
• /
• 1973

The purpose of this study was to investigate the dietary intakes of preschool children in rural areas and to develop programs of nutrition education, offering the mothers an appropriate advice for the improvement of the dietary practices corresponding to the modernization of the agriculture. The daily food intakes of 118 preschool children, randomly selected from the farm household, were studied by means of three-day records during summer season of 1972. The results showed that the dietary intakes of food groups such as meats and fishes, beans and the products, milks and small fishes, fruits, fats and oils were below 50 per cent of the recommended level-especially in that of milk. Therefore, the diet was generally below the recommended dietary allowances for protein with good quality, fat, calcium, vitamin A, thiamine, reboflavin and ascorbic acid. The dietary data revealed that most of preschool children in rural areas consumed rice and barley, almost every day. Other foods eaten less frequently were soybean paste, gimchi, potatoes, flour, and summer squash. The use of cereals should be curtailed some what and the use of milks, fishes, poultry, meats and protein extenders should be increased.

• 보존과학연구
• /
• s.29
• /
• pp.199-220
• /
• 2008

Hobun(Oyster shell White) is a traditional material used as extender and white pigment from ancient times. The production method of it, however, has been discontinued. We have studied the traditional production method of Hobun by weathering oyster shell, which is one of the traditional ways for preparing Hobun. Reproduction study of manufacturing method of the discontinued traditional material is an important accomplishment of our research. Also this study provides solid background knowledge to stabilize the production and supply of Hobun for the cultural asset repairing materials. The result can be summarized as follows: The production process of Hobun by weathering method takes 5 steps - (1) weathering shells ${\rightarrow}$ (2) washing ${\rightarrow}$ (3) pulverization ${\rightarrow}$ (4) separating fine powder by submerging in water ${\rightarrow}$ (5) drying. The major aim in step (1) is to eliminate organic impurities. In the step (4), the fine particles smaller than $25{\mu}m$ are separated by extracting the supernatant from stirred suspension after heavy particles are submerged. Also, the soluble inorganic impurities can be eliminated through the powder submerge in 15 times water and stirring the suspension 6 hours and changing the water 3~4 times. The final products have high quality with 94.03, 0.52, 2.05 for L, a, b, less than $25{\mu}m$ particle size, fine resistance for discoloration by light and environmental pollution and good workability.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.137-150
• /
• 1997

To investigate the feasibility of a boom sprayer in the paddy field, an experimental boom sprayer for both broadcast and directed spraying to the lower part of rice plants was developed. The droplet deposition characteristics of the boom sprayers were experimentally compared to those of power sprayer. Water sensitive papers(WSP) and a machine vision system were used to evaluate the coverage rate and droplet density. It was shown that the broadcast application by the boom sprayer was the best coverage among the tested sprayers. Coverage tate and droplet density were affected by the distance between nozzles and the sprayer ground speed, The best result was obtained when the distance of 30cm and the speed of 1.7km/hr. The directed application showed inconsistency in overall droplet distribution. The inconsistency was judged to be caused by conflict between plants and boom extenders. The power sprayer showed a very wide range of droplet size distribution, relatively larger droplets and inconsistency in cove The power sprayer was judged to be inadequate for the low-volume precision application because of inconsistency in performance and difficulty in adjusting the spraying rate. Based on the droplet coverage characteristics, it was concluded that the self-propelled boom sprayer for the broadcast application was feasible for an alternative to the power sprayer in case of low volume, precision application in paddy condition.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.