• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.77.2-77
• /
• 2002

Human upright standing posture in the sagittal plane is studied, when it exposed in the antero-posterior vibration. A two link inverted pendulum model is considered and described its functional behavior in terms of ankle and hip joint according to the dominant joints that provides the largest contribution to the corresponding human reactionary motion. The data is analyzed, both in the time domain and the frequency domain. Subjects behave as a non-rigid pendulum with a mass and a spring throughout the whole period of the platform motion. When vision was allowed, each segment of body shows more stabilized.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.64-68
• /
• 2014

This study was conducted to investigate the durability of carbon fiber/epoxy composites (CFRP) in a saline water environment. The carbon fiber/epoxy composites were modified to use nanoparticles such as carbon nanotubes and titanum oxide. These hybrid composites were exposed to a saline water environment for a certain period. The weight gain according to the immersion time, a quasi-static tensile test, and micro-graphic characterization were used to investigate the samples exposed to the saline water environment. The weight gains increased with increasing immersion time. The weight gains of the hybrid composites were lower than that for pure CFRP throughout the entire immersion time. The tensile strengths decreased with increasing immersion time. The tensile strengths of the hybrid composites were higher than that of the pure CFRP throughout the entire immersion time. The pure CFRP was observed to be more degraded than the hybrid composites in the saline water environment. Therefore, it was concluded that the addition of nanoparticles to CFRP could lead to improved durability in a saline water environment.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.141-147
• /
• 2016

Staphylococcus aureus cultures exposed to rotating magnetic field (RMF) were studied in order to analyse the possible induced changes in staphylococcal enterotoxin genes (se) expression. Liquid cultures of S. aureus strains carrying different se were exposed to the RMF of magnetic frequency 50 Hz and magnetic induction 34 mT for 10 h at $37^{\circ}C$. Three time points of bacterial growth cycle were considered for RNA extractions. Gene expression analyses were evaluated using real-time quantitative PCR method. The present study confirmed, that the RMF can stimulate the growth rate of S. aureus cultures in comparison to the unexposed controls, while the stimulation is not strain dependent. The studies have also shown, that the RMF, depending on the exposure time but regardless the bacterial strain, can influence on the expression of various se. In general, except for sea, as a result of bacterial exposure to the RMF through subsequent growth phases, the expression of se decreased, reaching the values below results recorded for unexposed controls. In the case of sea expression remained at a lower level as compared to the control, regardless the time of exposition.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.643-671
• /
• 2015

Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete members, whose economic and social consequences are growing up continuously. Prevention of these phenomena has a great importance in structural design, and modern Codes and Standards impose prescriptions concerning design details and concrete mix proportion for structures exposed to different external aggressive conditions, grouped in environmental classes. This paper focuses on reinforced concrete column section load carrying capacity degradation over time due to chloride induced steel pitting corrosion. The structural element is considered to be exposed to marine environment and the effects of corrosion are described by the time degradation of the axial-bending interaction diagram. Because chlorides ingress and consequent pitting corrosion propagation are both time-dependent mechanisms, the study adopts a time-variant predictive approach to evaluate residual strength of corroded reinforced concrete columns at different lifetimes. Corrosion initiation and propagation process is modelled by taking into account all the parameters, such as external environmental conditions, concrete mix proportion, concrete cover and so on, which influence the time evolution of the corrosion phenomenon and its effects on the residual strength of reinforced concrete columns sections.

• Composites Research
• /
• 제30권6호
• /
• pp.422-428
• /
• 2017

본 연구에서는 온도와 수분에 노출된 다중벽 탄소나노튜브가 함유된 나노복합재의 수분흡수거동, 인장특성, 열분석특성을 평가하였다. 이때 탄소나노튜브 함유량은 0 wt%, 1 wt%, 2 wt%를 고려하였으며 시편은 각각 $25^{\circ}C$와 $75^{\circ}C$의 침수조건에 600시간까지 노출시켰다. 연구결과에 따르면 수분흡수량은 노출시간이 길어지면 증가하지만 최대 수분흡수량과 600시간에서의 수분흡수량 차이는 일정하게 나타났다. 인장탄성계수는 노출시간이 길어지면 낮아지고 탄소나노튜브 함유량이 많고 노출온도가 높아지면 감소 정도는 크게 나타났다. 인장강도는 탄소나노튜브가 함유되지 않은 경우 노출시간이 길어지면 감소하지만 MWCNT 함유되면 MWCNT의 보강 효과로 인해 증가하는 양상이 나타났다. 저장탄성계수, 유리전이온도, $tan{\delta}$ 피크 크기는 노출시간이 길어지면 낮게 나타나며 높은 노출온도에 300시간 이상 노출되면 두 개의 피크를 갖는 $tan{\delta}$ 선도가 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.989-992
• /
• 2008

본 연구에서는 선일공업(주)의 축적된 기술력을 바탕으로 초고강도(150MPa급) 콘크리트를 당사 기술 연구소 신축시 노출콘크리트에 적용함으로써, 이에 대한 사례를 소개하고자 한다. 현장적용에 앞서 실내실험 및 레미콘 배치플랜트 실험(이하 B/P Test)을 통해 콘크리트의 기초물성(슬럼프플로우, 공기량, 50cm도달시간, 경시변화, 압축강도) 및 생산성을 평가하였으며, 다음으로 실구조물과 동일한 벽체두께 거푸집종류 노출콘크리트용 콘 등을 고려하여 제작한 모의부재를 대상으로 Mock-up Test를 실시하여 충진성, 표면마감성(육안관찰) 및 수화열을 평가하였다. 그 결과 슬럼프플로우, 공기량, 50cm도달시간, 경시변화 및 압축강도는 요구조건에 만족한 결과를 보였으며, 수화열 계측결과는 온도균열지수 0.78로 유해한 균열발생을 제한할 지수를 나타냈다. 현장타설시 초고강도 콘크리트의 높은 단위용적중량으로 인해 거푸집 터짐현상이 발생하였기 때문에, 재타설시에는 재발방지를 위해 거푸집을 보강하고 타설시간을 조정하였다. 또한 노출표면의 극대화를 위해 저주파(1차) 및 고주파(2차)로 2회에 걸쳐 진동다짐을 실시하였지만 표면곰보가 발생하였다. 따라서 향후 초고강도 콘크리트를 노출콘크리트에 적용할 경우, 다양한 변수조건에 대한 체계적인 시공관리계획 및 시공방법개선이 중요할 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제27권11호
• /
• pp.1012-1018
• /
• 2016

본 논문은 유한 차분 시간 영역(FDTD: Finite-Difference Time-Domain)법을 이용하여 낙뢰에 노출된 항공기와 같이 높은 도전성 물질로 구성된 구조체의 간접적 영향 분석을 위한 전자파 해석기법 연구를 수행하였다. 간접적 영향 분석을 위해 사용되는 낙뢰 파형은 매우 낮은 주파수 특성을 가지며, 알루미늄과 탄소섬유복합물질과 같이 높은 도전성 물질들로 구성된 구조체는 매우 짧은 표피 깊이를 가지고 있기 때문에 일반적인 3차원 FDTD법을 이용하여 해석을 수행할 경우, 매우 많은 메모리와 해석시간이 요구된다. 본 연구팀에서는 낙뢰 특성과 높은 도전율을 갖는 구조에 적합한 전자파 해석기법을 개발하였다. 개발된 해석 기법은 2차원 FDTD와 INBC(Impedance Network Boundary Condition) 알고리즘을 적용하였으며, 개발된 해석기법을 이용하여 낙뢰에 노출된 구조체의 간접적 영향을 분석하였다.

• 한국주거학회논문집
• /
• 제14권3호
• /
• pp.51-56
• /
• 2003

All the outdoor and indoor spaces are connected with each other. The human being moves toward those spaces with temperature fluctuation between the natural and artificial temperature. We conducted an experiment which subjects were wearing the data logger in urban life, and measured 24 hours' exposed temperature and thermal comfort in summer. Results were as follows. 1. Subjects controls their micro climate like this. Most of them(84.6%) get weather information. Fashion(46.2%) and weather(30.8%) are the reasons to select clothes. They spend their time in indoor environment for 84.92% hours of a day and have an air-conditioner(61.5%) in their houses. 2. Temperature fluctuation which subjects were exposed for 24 hours were from 15.6$^{\circ}C$ to 33.8$^{\circ}C$ and average fluctuation was 9.02$^{\circ}C$. The median value of experienced temperature were 26-26.5$^{\circ}C$ and average temperature was 26.18$^{\circ}C$. They experienced cold shock of 3.96 times in a day.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.135-140
• /
• 2012

Massive numbers of users of social networks share various types of information such as opinions, news, and ideas in real time. As a new form of social network, Twitter is a particularly useful information source. Studying influence can help us better understand the role of social networks. The popularity of social networks like Twitter is primarily measured by the number of followers. The number of followers in Twitter and the number of users exposed to news media are important factors in measuring influence. We chose Twitter and the New York Times as representative media to analyze the influence and present an empirical analysis of these datasets. When the correlation between the number of followers in Twitter and the number of users exposed to the New York Times is computed, the result is moderately high. The correlation between the number of users exposed to the New York Times and the number of sections including the users on it, was found to be very high. We measure the normalized influence score using our proposed expression based on the two correlation coefficients.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.181-185
• /
• 2000

A new technique capable of accelerating the crystallization of ferrite powder at low temperature is developed. Effects of the ultrasonic waves on the crystallization were studied for ferrite powders prepared using the co-precipitation method. The crystallization of the ferrite powders exposed to the ultrasonic waves were characterized by the XRD. The amorphous ferrite powders prepared using the co-precipitation method were crystallized as a result of the exposure to the ultrasonic waves for 5h and the crystallization of the ferrite powders became more enhanced in proportion to the time exposed. The ferrite powder exposed to the ultrasonic waves for 25h had higher crystallinity a larger specific surface area than the ferrite powder calcined at 500$^{\circ}C$ for 2h.