• Structural Engineering and Mechanics
• /
• v.89 no.2
• /
• pp.103-119
• /
• 2024

The present research investigates the thermodynamically bending behavior of FG sandwich plates, laying on the Winkler/Pasternak/Kerr foundation with various boundary conditions, subjected to harmonic thermal load varying through thickness. The supposed FG sandwich plate has three layers with a ceramic core. The constituents' volume fractions of the lower and upper faces vary gradually in the direction of the FG sandwich plate thickness. This variation is performed according to various models: a Power law, Trigonometric, Viola-Tornabene, and the Exponential model, while the core is constantly homogeneous. The displacement field considered in the current work contains integral terms and fewer unknowns than other theories in the literature. The corresponding equations of motion are derived based on Hamilton's principle. The impact of the distribution model, scheme, aspect ratio, side-to-thickness ratio, boundary conditions, and elastic foundations on thermodynamic bending are examined in this study. The deflections obtained for the sandwich plate without elastic foundations have the lowest values for all boundary conditions. In addition, the minimum deflection values are obtained for the exponential volume fraction law model. The sandwich plate's non-dimensional deflection increases as the aspect ratio increases for all distribution models.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.15-23
• /
• 2008

In this paper, an algorithm, that provisions absolute differentiation of packet delays is proposed, simulated, and implemented with VHDL on XPC 860 CPU based test board with an objective for enhancing quality of service (QoS) in future packet networks. It features a scheme that compensates the deviation for prediction on the traffic to be arrived continuously. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot and derives the difference between them. The deviation is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the exponential traffic. It is demonstrated through both simulation and the real traffic test on the board that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional non-adaptive mechanism.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.17-25
• /
• 2007

In this paper, an algorithm that provisions proportional differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that adjusts the target delay every time slot to compensate the deviation from the target delay which is caused by the prediction error on the traffic to be arrived in the next time slot. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the exponential rate traffic. It is demonstrated through simulations that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA and the performance is verified under the test board based on the XPC860P CPU.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.23-27
• /
• 2014

In this paper, we propose a soft demapping method for 64-ary APSK in the DVB-S3 system. The proposed method in this paper uses the hard decision threshold (HDT) line for each constituent bit in a symbol, and calculates the soft bit information with the distance between the HDT line and the detected symbol. If the HDT lines are defined in a simple manner, the complexity to estimate soft information can be largely reduced compared with the maximum likelihood detection (MLD) which has an exponential complexity. By considering this, we first derive HDT lines for each constituent bit for a 64-APSK symbol, and propose a method to calculate soft bit information. We simulate the BER performance of the proposed scheme by using a turbo codes which requires soft-input-soft-output information, and compare it that of the MLD. The result show that the proposed scheme produces approximating performance to MLD with largely reduced complexity.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.437-447
• /
• 2003

In order to reduce the increasing packet loss rates caused by an exponential increase in network traffic, the IETF(Internet Engineering Task Force) is considering the deployment of active queue management techniques such as RED(Random Early Detection) algorithm. However, RED algorithm simple but does not protect traffic from high-bandwidth flows, which include not only flows that fail to use end-to-end congestion control such as UDP flow, but also short round-trip time TCP flows. In this paper, in order to solve this problem, we propose a simple fairness queue management scheme, called AFQM(Approximate Fair Queue Management) algorithm, that discriminate against the flows which submit more packets/sec than is allowed by their fair share. By doing this, the scheme aims to approximate the fair queueing policy Since it is a small overhead and easy to implement, AFQM algorithm controls unresponsive or misbehaving flows with a minimum overhead.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.47-57
• /
• 2007

In this study, the analysis of density characteristics of some dredged and reclaimed ground sites, which is necessary for liquefaction evaluation of a dredged and reclaimed ground, was conducted. From analyzing a simplified liquefaction potential evaluation using SPT-N values which have been applied as domestic earthquake-resistant design criterion, improvement scheme is suggested. Based on the analysis result of density characteristics, it was found out that the relative density and the intial N-value ranged respectively $40{\sim}50%\;and\;5{\sim}8$. In the case of applying Liao & Whitman's equation to correct effective overburden pressure, liquefaction resistance of the upper ground that is relatively weaker than that of lower ground is overestimated. So, Skempton's equation is recommended. And the N value with depth which is applied for design process should be estimated by the exponential equation, $N=1.35{\sigma}'^{0.75}$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.418-420
• /
• 2005

IEEE 802.11 에서 현재까지 많이 연구되어진 주제는 노드들 간의 공평성(fairness)에 중점을 두거나 처리율(throughput)을 높이는데 초점을 맞추어 진 것들이었다. 전체 처리율을 높이는데 AP의 백오프 방식에 관련해서는 노드들 간에 관한 연구에 비하여 비교적 연구가 적은편이다. 현재 AP와 노드들은 충돌이 발생하면 BEB(Binary Exponential backoff) 방식으로 셋팅되어 사용하고 있기 때문에 1:N의 불공평한(unfairness) 상황이 발생한다. 하향링크(downlink)가 대부분인 환경에서 AP가 다른 노드들과 같은 채널 접근확률을 가진다는 것은 바람직하지 않다. 따라서 AP가 노드들보다 우선권(priority)을 높여서 처리율을 높이는 방안이 필요하다. 그래서 본 논문에서는 AP의 백오프 방식 및 CW(Contention Window)가 변화하는데 따라서 전체 처리율에 어떤 영향을 끼치는가와 노드 수에 따른 AP의 적절한 전략 과 백오프 CW값을 분석해 보았다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.615-622
• /
• 2006

DVB-S2 offers various coding rate and modulation schemes. Therefore this paper proposes bit split methods to applying to multilevel modulation. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX and Sector method to reduce the high complexity of LLR method.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.119-129
• /
• 1995

In this paper, we propose a schedulatility analysis method for real-time programs. Several approaches to anlayzing schedulability have been developed, but since these approaches use a fixed priority scheduling method and/or traverse all possible state spaces, there take place exponential time and space complexity of these methods, Therefore it is necessary to reduce the state space and detect schedulability at earlier time. Our schedulability analysis method uses a minimum unit time taken to terminate synchronization action, a minimum unit time taken to terminate actions after synchronization, and a deadline of processes to detect unschedulability at earlier time and dynamic scheduling scheme to reduce state space. We conclude that our method can detected unschedulability earlier 50 percent unit time than Fredette's method.

• Advances in nano research
• /
• v.3 no.3
• /
• pp.143-168
• /
• 2015

Initiation of crack and its growth simulation requires accurate model of traction - separation law. Accurate modeling of traction-separation law remains always a great challenge. Atomistic simulations based prediction has great potential in arriving at accurate traction-separation law. The present paper is aimed at establishing a method to address the above problem. A method for traction-separation law prediction via utilizing atomistic simulations data has been proposed. In this direction, firstly, a simpler approach of common neighbor analysis (CNA) for the prediction of crack growth has been proposed and results have been compared with previously used approach of threshold potential energy. Next, a scheme for prediction of crack speed has been demonstrated based on the stable crack growth criteria. Also, an algorithm has been proposed that utilizes a variable relaxation time period for the computation of crack growth, accurate stress behavior, and traction-separation atomistic law. An understanding has been established for the generation of smoother traction-separation law (including the effect of free surface) from a huge amount of raw atomistic data. A new curve fit has also been proposed for predicting traction-separation data generated from the molecular dynamics simulations. The proposed traction-separation law has also been compared with the polynomial and exponential model used earlier for the prediction of traction-separation law for the bulk materials.