• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.699-702
• /
• 2008

In this study, it has observed the precipitation and stage data at each point every ten minutes for gaining the sustainable, reliable and high-quality hydrological data through operating the experimental watershed in mountainous areas such as Gyecheon located in the upstream of Seom river that is the tributary of Nam-Han river. And it has regularly surveyed the runoff and verified the reliability of data using the uncertainty analysis at the gaging station. So, this study has developed the stage-discharge curve(rating curve) and these results are expected to be used as fundamental data for analyzing the circulation of water through surveying evapotranspiration, soil moisture and level of groundwater in watershed.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.1-6
• /
• 2003

Steady flow bench test is a practical, powerful and widely used in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very difficult to investigate all port shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method . for this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. Numerical results were compared with those of real steady flow tests. As a result, the results of 3-D analysis were almost consistent with experimental data.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.370-381
• /
• 2002

The neutron induced nuclear data for Pr-141, Nd-143, Nd-145, Sm-147 and Sm-149 were calculated and evaluated from 10 keV to 20 MeV. The energy dependent optical model potential parameters were extracted based on the recent experimental data and applied up to 20 MeV. The s-wave strength function was calculated. Spherical optical model , statistical model in equilibrium energy, multistep direct and multistep compound model in pre-equilibrium energy and direct capture model were introduced in Empire calculation. The theoretically calculated cross sections were compared with the experimental data and the evaluated files. The model calculated total and capture cross sections were in good agreement with the reference experimental data. The capture cross sections in pre-equilibrium were enhanced in recent released Empire version. The evaluated cross section results were compiled to ENDF-6 format and will improve the ENDF/B-Vl.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.241-246
• /
• 2024

The study was carried out by numerical integration based on the diffraction properties and elemental composition. The elemental compositions of breast tissues in the literature were tested. The photon attenuation coefficients calculated using the recent elemental composition were found within 0.2-16% for adipose tissue and within 0.04-17% for glandular tissue with the experimental reference data. The attenuation coefficients of cancerous breast tissue calculated according to the elemental content previously measured in breast cancer patients were found within 0-17% with experimental data in the literature. The attenuation coefficients are of great interest to medical research. To calculate realistic attenuation coefficients, the characteristic coherent scatter, which is most intense at small angles, must be considered. For this reason, experimentally measured form factor data were reviewed, and the most compatible one with the theoretical form factor data produced in this study was used at low momentum transfer x (0 < x ≤ 8 nm^-1). The differential linear coherent scattering distributions were calculated for an energy value of 17.44 keV and compared with their experimental counterparts.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• 한국추진공학회지
• /
• 제13권6호
• /
• pp.1-7
• /
• 2009

가스터빈 엔진의 성능은 그 구성품 성능 특성에 큰 영향을 받는다. 보통 이러한 구성품 성능 특성은 여러 조건에서의 수많은 실험을 통해 얻을 수 있지만 그것은 제작사의 고유 재산이기 때문에 쉽게 제공되지 않는다. 그렇기 때문에 보통 성능 덱을 이용하거나 소유하고 있는 엔진 성능 맵을 스케일링 하여 사용한다. 하지만 이러한 방법은 탈설계점에서 오차를 보인다. 이에 본 연구에서는 소형 가스터빈 엔진 실험 장치를 구성하여 몇 구간에서의 실험을 통해 데이터를 축적하고 이를 이용하여 구성품 성능 맵을 축척하는 방법을 제시하였다. 그리고 프로그램을 이용하여 대상 엔진의 정상상태 성능 모델을 구성하여 실제 측정 데이터와 새롭게 생성된 구성품 맵을 사용했을 경우, 그리고 기존의 방법을 이용한 경우를 비교하였다.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.45-57
• /
• 2002

In this paper, the results gained by applying many impingement models to the cylinder and flat plate were analyzed in comparison with the experimental data to study a spray/wall interaction phenomena. To begin with, the behavior of spray injected normal to the wall was analysed using three different impingement models ; Naber and Reitz model(NR model), Watkins and Wang model(WW model) and Park and Watkins model(PW model) in the present calculation. The results obtained from these models were compared with experimental data of Katsura et. al. The results indicated that PW model was in better agreement with experimental data than the NR and WW model. Also f3r spray injected at 30DEG , the result of three models were compared with experimental data of Fujimoto et. al. The results showed that m model overpredicted the penetration in the radial direction because this model was based on the inviscid jet analogy. WW model did not predicted the radius and height of the wall spray effectively. It might be thought that this discrepancy was due to the lack of consideration of spray film velocity occurred at impingement site. The result of PW model agrees with the experimental data as time goes on. In particular, a height of the spray droplets was predicted more closely to the experimental data than the other two models. The results of PW model in which the spray droplets were distributed densely around the edge of droplet distribution shaped in a circle had an agreement with the experimental data of Fujimoto et. al. Therefore, it was concluded that PW model performed better than M and WW model for prediction of spray behavior. The numerical calculation using PW model performed to the cylinder similar to the real shape of DI engine. The results showed that vortex strength near the wall in the cylinder was stronger than that in the case of flat plate. Contrary to the flat plat, an existence of the side wall in the cylinder caused the tangential velocity component to be reduced and the normal velocity component to be increased. The flow tends to rotate to the inside of cylinder going upward to the right side wall of cylinder gradually as time passes. Also, the results showed that as the spray angle increases, the gas velocity distribution and the tumble flow seemed to be formed widely.

• 한국과학교육학회지
• /
• 제29권8호
• /
• pp.848-860
• /
• 2009

이 연구에서는 개방적 참탐구 활동을 수행한 학생들의 탐구보고서에서 과학자들의 보고서 쓰기에서와 같은 특징이 나타나는지 살펴보고, 개방적 참탐구 활동 수행 후 실시한 학급 토론활동이 탐구보고서 쓰기에 미치는 효과에 대해서 알아보았다. 서울시 소재 과학고등학교 1학년 학생들을 대상으로 비교집단(전통적 학교탐구 수행, n=45), 실험집단 1(개방적 참탐구 활동 수행, n=43), 실험집단 2(개방적 참탐구 활동 수행 후 학급토론 실시, n=43)로 구분하여, 탐구를 수행하게 한 후 작성한 보고서를 분석하였다. 보고서 분석은 실험 결과에 대한 예상하기(근거제시 및 기술의 타당성), 데이터 해석하기(데이터전환 및 비판적 해석), 결론쓰기(실험결과에 기초한 객관적 진술)를 중심으로 이루어졌다. 그 결과 실험집단에서 과학자들의 보고서쓰기 특징이 나타나는 빈도가 비교집단보다 높게 나타났다. 특히 '근거를 제시하여 예상하기(p<.01)'와 '데이터에 대한 비판적인 평가(p<.05)'에서 유의미한 차이를 나타내었다. 그러나 결론쓰기에서는 세 집단 모두 실험결과에 기초하여 객관적으로 기술하는 빈도가 아주 낮게 나타났다. 보고서의 기술 내용면에서는, 실험집단에서 실험결과에 대한 예상이 훨씬 더 정교하게 기술되어 있었고, 데이터 전환의 정확성과 데이터에 대한 비판적 해석을 볼 수 있었다. 그리고 실험집단 2의 학생들의 보고서에서는 데이터에 대한 비판적 해석, 실험의 오차에 대한 기술을 볼 수 있었고, 이는 학급 토론활동이 학생들에게 과학적 사고를 하게 하는데 효과적임을 의미한다.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.584-588
• /
• 2009

Layered ZnS/$CaF_2$/ZnS/Cu film was deposited on glass substrate by using evaporation method. ZnS and $CaF_2$ were chosen as high and low refractive materials. Cu was used as mid-reflective layer. Reflectance with different optical thickness of $CaF_2$ ranging from $0.25{\lambda}\;to\;0.5{\lambda}$ were systematically investigated by using spectrophotometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer, the ZnS/$CaF_2$/ZnS/Cu multi-layered thin film show the maximum reflectance of 80% at 625nm $(0.25{\lambda}\;in\;CaF_2)$ and 42% at 660nm $(0.5{\lambda}\;in\;CaF_2)$ respectively. As compared with the experimental results and simulation data, it was confirmed the experimental data is well matched with the EMP data.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2830-2838
• /
• 2021

This work deals with the assessment of the burnup capabilities of the Serpent Monte Carlo code to predict spent nuclear fuel (SNF) isotopic concentrations for low-enriched uranium (LEU) fuel at different burnup levels up to 47 MWd/kgU. The irradiation of six UO₂ experimental samples in three different VVER-1000 reactor units has been simulated and the predicted concentrations of actinides up to ²⁴⁴Cm have been compared with the corresponding measured values. The results show a global good agreement between calculated and experimental concentrations, in several cases within the margins of the nuclear data uncertainties and in a few cases even within the reported experimental uncertainties. The differences in the performances of the JEFF3.1.1, ENDF/B-VII.1 and ENDF/B-VIII.0 nuclear data libraries (NDLs) have also been assessed and the use of the newly released ENDF/B-VIII.0 library has shown an increased accuracy in the prediction of the C/E's for some of the actinides considered, particularly for the plutonium isotopes. This work represents a step forward towards the validation of advanced simulation tools against post irradiation experimental data and the obtained results provide an evidence of the capabilities of the Serpent Monte-Carlo code with the associated modern NDLs to accurately compute SNF nuclide inventory concentrations for VVER-1000 type reactors.