• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.715-724
• /
• 2020

The influence on flexural strength of Glass/Epoxy laminated composite curved panels of different geometries (cylindrical, spherical, elliptical, hyperboloid and flat) due to inclusion of nano cenosphere filler examined in this research article. The deflection responses of the hybrid structure are evaluated numerically using the isoparametric finite element technique and modelled mathematically via higher-order displacement structural kinematics. To predict the deflection values, a customised in-house computer code in MATLAB environment is prepared using the higher-order isoparametric formulation. Subsequently, the numerical model validity has been established by comparing with those of available benchmark solution including the convergence characteristics of the finite element solution. Further, a few cenosphere filled hybrid composite are prepared for different volume fractions for the experimental purpose, to review the propose model accuracy. The experimental deflection values are compared with the finite element solutions, where the experimental elastic properties are adopted for the computation. Finally, the effect of different variable design dependent parameter and the percentages of nano cenosphere including the geometrical shapes obtained via a set of numerical experimentation.

• Journal of Nutrition and Health
• /
• 제13권3호
• /
• pp.134-138
• /
• 1980

The present study was designed to investigate the effects of the level of calcium intake on it's apparent absorption rate in college women. Six college girls aged 19 to 20 were fed general dormitary meals containing approximately500mg of calcium for one week and thereafter, the experimental diets containing about 800mg of calcium were given for one week. Average values for calcium intake, fecal excretion of calcium, and apparent absorption rateof calcium in both periods were determined and these values for two periods were compared by using t-test. 1) Average intakes of calcium, protein, and fat of the subjects during the period of experimental diet were significantly higher than those of general diet period. 2) Higher consumption of three food groups; meat, poultry, and fishes, fruits and vegetables, and fats and oils were noted during experimental period. However, there was no significant difference in the consumption of cereals and milk groups during these two periods. 3) The apparent absorption rate of calcium during the experimental period was higher (64%) than the one for general diet period (56%). It was noteworthy that average calcium intakes was higher during the experimental diet period (785mg) than 536mg for general diet period while the fecal excretions of calcium in both periods were not significantly different.

• Journal of Oral Medicine and Pain
• /
• 제12권1호
• /
• pp.75-83
• /
• 1987

This study was designed to investigate the effects of TMJ incoordination to condylar movements, especially, the ISS. The sounds are one of the symptoms in TMJ incoordinated disorder, and it may cause the changes of mandibular movement trajectory. 19 students with only TMJ sounds and 16 students with no TMJ problems participated in this study. The subject performed Rt. lateral, Lt. lateral and protrusive movements, and repeated 3 times on each movement. Pantronic was used to record the measures of condylar movement paths. The obtained results were as follows : 1. The mean values of RISS and LISS in control group were 0.29mm, 0.36mm respectively, and those in experimental group were 0.49mm, 0.41mm repectively. The mean values of RISS was higher in experimental group than that of RISS in control group. 2. Correlation coefficients between PRI and RISS, LISS were slightly higher in experimental group than those in control group, therefore, PRI was more likely to be affected by ISS in experimental group. 3. In control group PRI was correlated to RISS, LORB, RPRO and LPRO, but in experimental group PRI was not correlated to those items. From the study, the author knew that the condylar movements was stable in control group.

• Steel and Composite Structures
• /
• 제9권3호
• /
• pp.255-274
• /
• 2009

This paper presents an experimental study of a newly developed composite floor system, built up from thin-walled C-profiles and upper concrete deck. Trapezoidal sheeting provides the formwork and the fastening of the sheet transmits the shear forces between the C-profiles and the deck. The modified formation of the standard self-drilling screw in the beam-to-sheet connection is applied as shear connector. Push-out tests are completed to study the composite behaviour of the different connection arrangements. On the basis of the test results the behaviour is characterized by the observed failure modes. The design values of the connection stiffness and strength are calculated by the recommendation of Eurocode 4. In the next phase of the experimental study six full-scale composite beams are tested. The global geometry is based on the proposed geometry of the developed floor system. The applied shear connections are selected as the most efficient arrangements obtained from the push-out tests. The experimental behaviour of the composite beams are discussed and evaluated. As a conclusion of the experimental study the Eurocode 4 plastic design method is validated for the developed composite floor.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.85-93
• /
• 1986

The purpose of this study was to investigate the curing effect of visible light through tooth substance, 0.5mm, 1.0mm thickness of enamel and dentin were prepared. Experimental specimen were made by Bisfil M & Silux packing into cylindrical brass mold 6.0mm in diameter, 2.0mm and 3.0mm, in height. All specimen were irradiated by visible light (Grip type) model No. SDL-50 Shofu Co.) for 30 seconds through tooth substance. Experimental groups were classified into enamel group (group 1) and dentin group (group 2) according to the thickness of tooth materials and then were divided into 2 subgroups (0.5mm group and 1.0mm group). In experimental groups, visible light irradiated to the specimen through either 0.5mm in thick or 1.0mm in think of tooth material. In Control group specimen were prepared by direct irradiation on the specimen surface of visible light without through tooth substance. The hardness was measured with a Barcol hardness tester (Barber-Colman Co. U.S.A.) for each prepared specimen. The results were as follows: 1. In control group, there were higher hardness values than those of in experimental group. 2. In experimental groups, 0.5mm groups had higher hardness values than 1.0mm groups did. 3. The hardness value at top surface of the specimen were higher than the hardness of bottom surface in each group. 4. Bisfil M had higher hardness values than Silux. 5. In all specimen of 3.0mm height polymerization effect was not occurred at bottom surface except Bisfil M in control group.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.559-564
• /
• 1998

The object of this thesis is an analytical study on shear deformation of reinforced concrete members using monte carlo method. Using the established experimental data that has been presented in various documents the stress-strain relationships curves of reinforced concrete (300kgf/$\textrm{cm}^2$~400kgf/$\textrm{cm}^2$) models are proposed. Finally, the theoretical values calculated using the analytical method developed in this study have been investigated in comparison with the experimental ones which were carried out earlier in order to prove its validity. From the results it has been shown that theoretical values agree quite well with experimental ones, and it could be pointed out that the presented analytical method is widely acceptable for the practical analysis of shear displacement of reinforced concrete members.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.109-116
• /
• 2002

The solution of the aircraft wing spar cross-section area optimization problem is obtained by the response surface method. The object function of the problem is wing total weight, design variables are spar cross-section areas, constraints are the conditions that the stresses at the each spar is less than the allowable stress. D-Optimal condition is utilized to obtain the experimental points to construct the response surfaces. D-Optimal experimental points are obtained by the commercial software "Deign-Expert". Response values for the object function and constraints for each experimental point are calculated by the NASTRAN. Response surfaces for object function and constraints are approximated from the response values by the least square method. The optimization solution is obtained by the DOT for the response surfaces of object function and constraints. The optimization results obtained from the response surface are compared with the results obtained by the NASTRAN SOL200.

• 자원ㆍ환경경제연구
• /
• 제9권4호
• /
• pp.747-771
• /
• 2000

This paper reports the results of a study to elicit willingness to pay (WTP) for changes in health risks from exposure to As, Pb, THM in tap water using experimental market method. The experimental market method, compared with other non-market valuation methods, allows us to use incentive compatible demand revealing scheme, to acquire market-like experience through repetitive auctions, and to incorporate learning process by providing new information during the session. Participants seemed to utilize the objective risk information in a 'rational' manner, and to change their WTP bids accordingly. Moreover they were able to reduce the 'ambiguity' in risk perception processes when objective risk probabilities provided are quite different from their subjective perceptions. Nonetheless, anchoring effects appeared to be still persistent in spite of market-like experience and learning opportunity. And implicit values entailed by WTP bid/risk tradeoffs indicate a wide variation in values across alternative risk reductions and overrated responses to very small risk reductions.

• 전기의세계
• /
• 제27권2호
• /
• pp.69-74
• /
• 1978

There have been a number of experimental or theorethical investigations of transport coefficient for electrons in the field of gas. In this paper the authors present the method by which Townsend first ionization doefficient (.alpha.) or attachment coefficient (.eta.) can be deduced easily and precisely by means of analyzing Townsend equation based on linealized least squares method. The apparent ionization coefficient (.alpha.-.eta.)/p have been analyzed from the experimental data by applying the new method above mentioned. And the values of (.alpha.-.eta.)/p in SF$_{6}$ as a function of E/p were agreement with the values measured by Bhalla et al. who analyzed th experimental pre-breakdown currents. In the same way (.alpha.-.eta.)/p in N$_{2}$O had a same tendency to that of Folkard et al.l.

• 국제물리치료학회지
• /
• 제8권1호
• /
• pp.1071-1076
• /
• 2017

The purpose of this study was to determine if a gentle form of manual lumbar traction could reduce painful lumbar motions associated with lumbar disc degeneration (LDD). This clinical trial incorporated 134 participants with painful active lumbar motion. Participants were randomly assigned to an experimental treatment or sham group. 67 participants received sidelying manual lumbar traction while the other 67 participants received a sham treatment. Pre and post treatment NPRS values for the painful active lumbar motion were recorded for each group. There was a statistically significant improvement (P=0.00) for decreased pain intensity during active lumbar motion in the experimental group as compared to the sham treatment group. The average percent decrease in numeric pain rating scale (NPRS) values was 52.1% for the experimental treatment group and 8.1% for the sham group. The results of the study suggest that side-lying manual lumbar traction can improve painful lumbar motion in patients with LDD.